Rabbit Unicorn
Rabbit Unicorn
3D
Published 2020-01-04T13:20:12+00:00
Rabbit Unicorn in OBJ
The model is ready to print on a 3D printer
I used to print a 1mm nozzle, so it’s faster 8)
It was printed from orange PLA using a headphone and ear stand (the stand is well separated from the flat edges)
The dimensions of the model are shown in the photo in the application (units of mm)
The mass of the model when printing 1mm nozzle with 2 perimeters and 10% infill - 119g
printing time on a layer of 0.5 mm - 2 hours 30 minutes
Have fun!
1 part
For printing 1 mm nozzle
If your printer uses a standard extruder with a short nozzle, you need to set the temperature in the range of 240-250 degrees Celsius and reduce the print speed to 25 mm / s (as I printed on a standard printer), otherwise it was done before the filament melted
If you have already printed with large nozzles, then this information will not be useful to you 8)
(the extruders are different, and your printer may need different settings)
You can always print this model with a nozzle of any size and scale to the desired size.
| Date published | 04/01/2020 |
| Time to do | 150 - minutes |
| Material Quantity | 119g |
| Dimensions | 108 x 87 x 110 mm |