Rainbow Six Siege - Proximity Alarm
Rainbow Six Siege - Proximity Alarm
Published 2022-01-12T09:06:49+00:00
This is a non functional replica of the Proximity Alarm from the game Tom Clancy's Rainbow Six Siege.
It was modelled in Fusion360. F3D files are included if you want to change the model to fit electronics inside, etc.
In order to make prining easier, most parts require glue to assemble.
This model is made from multiple parts. Some of them reqire supports, some of them require special settings to be printed.
Some parts need to be printed multiple times. The amount of each part is always the number at the end of a file name. The recommended color is also included in the file name.
Here is a brief list of all the parts:
Printed ONCE:
- r6pa-darkgray-mainbody-1 //requires supports
- r6pa-lightgray-mainbody2-1 //requires supports
- r6pa-black-speaker-1 // 50% exposed infill
- r6pa-black-powerbutton-1
- r6pa-white-sticker-1
Printed THRICE:
- r6pa-gray-protector-3
- r6pa-blue-led-3
- r6pa-beige-foot-3
- r6pa-white-leftstripe-3
- r6pa-white-middlestripe-3
- r6pa-white-rightstripe-3
To print with exposed infill, set your top and bottom thickness to 0mm.
Glue everything together after printing. I recommend epoxy, since the supported area is very rough and might not work well with most cyanoacrylate based adhesives.
Have fun printing! //this is not optional
Date published | 12/01/2022 |
Time to do | 840 - 840 minutes |
Material Quantity | 98 grams |
Dimensions | 140mm x 125mm x 32mm |
Technology | FDM |