Raspberry Pi 4 with IQaudio DAC+ Case
Raspberry Pi 4 with IQaudio DAC+ Case
3D
Published 2021-11-08T09:18:16+00:00
I made this simple case for a Raspberry Pi 4 with the IQaudio DAC+. I run Volumio on that thing and it works great. I like to have the Pi cool, so I add a 30x30mm Fan from an RC Car ESC, which I power with the 3.3V from the Raspberry Pi. If you like to install the Raspberry Pi Logo, just drill a 3mm hole in the top.
There are two cases available, one for the fan and one without.
You need:
1x Raspberry Pi 4
https://www.raspberrypi.org/products/raspberry-pi-4-model-b/
1x IQaudio DAC+
https://www.raspberrypi.org/blog/iqaudio-is-now-raspberry-pi/
4x the stands which are included in the IQaudio DAC+ Kit
4x stands M2.5mm x 20mm
8x countersunk screw M2.5 x 8mm
1x 30x30mm Fan, holes distance 25x25mm
Software Volumio:
https://volumio.org/
Use at your own risk...;-)
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 30%
Filament material: PLA
| Date published | 08/11/2021 |