Raspberry Pi Case for NAS with Minirack, SSD. openmediavault
Raspberry Pi Case for NAS with Minirack, SSD. openmediavault
3D
Published 2021-11-08T09:18:16+00:00
This is the second Version of my Raspberry Pi 4 NAS, but now I installed some SSD's and I added more vents in the case.
There are 3 different plates, one for the Raspberry Pi, you screw the Pi it down, one for SSD or 2.5" harddisks. (made for Kingston A400 SSD 2.5") and an empty plate, if you run a standard usb harddisk.
You need:
8x spacer 15mm between the SSD's
4x spacer 25mm between the the Raspberry Pi bottom and top
4x spacer 20mm inside the Raspberry Pi
4x M3x15 lenshead screws for the rack stands
4x M3x 15mm for the bottom of the Raspberry Case
4x M3 covernut
You can remove the GPIO cover and the cover to get access to USB and Ethernet. If your interested, I run the https://www.openmediavault.org/ on the Pi.
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 30%
Filament material: PLA
| Date published | 08/11/2021 |