Sandbag Fortifications
$5.50 Sandbag Fortifications
3D
Published 2022-09-28T10:44:26+00:00
Intended for 3d print.
Basic sandbag barricades and fortifications. Usable in tabletop games, from 6mm scale and upwards. Use the images in the image gallery too see a presentation of all 13 model parts included in the model pack.
Also included is a Maxim DP1910 machine gun, that fits the sandbags stylistically. Printing the Maxim at sub-20mm scale is not recommended.
Intended for print in 6mm scale or upwards.
Models are all prescaled to approximately 28mm scale.
Relatively high printer settings are recommended (0,08 mm layer height, 20 percent infill). The sandbags are such basic models that you could probably get away with medium-level printer setttings as well, however.
Printing time depends entirely on hardware, selected size, selected model(s) selected settings et cetera. A rough estimate is 20 minutes printing time for a single model at default scale.
All models are pre-scaled to roughly 28mm scale. The sandbag models can all be printed at as small a scale as 6mm. It is not recommended that you print the maxim gun at sub-20mm scale,
due to loss of details and general frailty.
No models are currently presupported. If getting presupported models is important to you, you can contact me and I'll include presupported versions in the product.
| Date published | 28/09/2022 |
| Price | $5.50 |