Seat Belt Grabber Aid
Seat Belt Grabber Aid
Published 2018-10-25T09:28:00+00:00
This is a seat belt grabber assistant that was designed for the ease of grabbing the seat belt for persons with trouble performing this task for any reason. I have seen other aids online that range from $8 to $25 but are half the length of this one. This whole design takes about 232 grams of PLA at 50% fill density. With a $20 1kg roll and the included hardware this design costs about $6, which is a significant differenece from $25 and it is twice the length and has room for improvement.
Original seat belt grabber off of Amazon https://www.amazon.com/Seat-Belt-Extender-Pros-1008/dp/B004I9KGJY?keywords=seat+belt+grabber&qid=1540475070&sr=8-2-spons&ref=sr_1_2_sspa&psc=1&smid=AFDMEKAPSL95D.
It is fairly close in price but is smaller, looks flimsy, and is have the length.
No supporrs are needed. The density can probably be lowered to save more material and make lighter. The grabber end also could be shortened.
Date published | 25/10/2018 |
Time to do | 5 - 10 minutes |
Material Quantity | 232 |
Technology | FDM |
Complexity | Easy |
Support Free | YES |