Sigma Rho Building 3 - Teleporter
$5.99 Sigma Rho Building 3 - Teleporter
3D
Published 2021-10-12T14:10:31+00:00
This building was determined to likely be a teleporter, or transmat. Likely a short distance one due to the relatively small size.
When the Acarian Empire encountered the alien race at the Tau Librae system, they were believed to be indigenous, although the Binary system did not appear capable of producing advanced life. It was later discovered that this was a multiple stellar system-spanning society with origins in the Sigma Rho system. Tensions have been high with the 'race' known simply as 'Sigma Rho' since the alien’s culture consists of many consortiums cooperating together and view the Imperial Acarian Dynasty as an opposing societal system.
[Figures not included]
Two files are included. One smaller size file that is intended for larger layer heights.
This model is 32mm scale and designed for FDM printing, measuring 5.25 x 5.31 x 6.42 inches, but is easily scalable to other sizes. Comes in one piece. Supports are not required, but depending on how well your printer bridges, you may want to add supports to the upper inside surfaces.
Models are for size comparison only, and are not included. Figures are from Papsikels (we are an authorized Merchant).
| Date published | 12/10/2021 |
| Price | $5.99 |
| Time to do | 710 - 711 minutes |
| Material Quantity | 110.57 |
| Dimensions | 5.25" x 5.31" x 6.42" |
| Support Free | YES |