Sip & Rollers Kickstarter Bundle - Deluxe Can Holding Dice Towers
$40.00 Sip & Rollers Kickstarter Bundle - Deluxe Can Holding Dice Towers
Published 2024-02-22T00:27:02+00:00
Receive all digital rewards offered from the Sip & Rollers Kickstarter campaign for 3D prints of the Sip & Roller products offered in this campaign.
NON-COMMERCIAL RIGHTS - For personal use only. These are the STL Digital Files for tower can holder and tray included. :)
The mugs have been prepared as right-handed (RH) and left-handed (LH) variants, including variants with and without the class text along the front. All 3mf files include a “plug” part that can be deleted if you want to insert a hole in the bottom of the can holder. This would prevent the formation of a vacuum and making it easier to insert and remove cans.
Includes:
artificer
barbarian
bard
blank_castle
cleric
druid
dwarven
elven
fighter
hungry_mimic
monk
paladin
ranger
rogue
sci-fi
sorcerer
warlock
wizard
Accessories:
Turn tracker lid system
Wooden Fence Coaster
HP Tracker Coaster STL
More stretch goals to be added over the next few months.
More info on Kickstarter page: http://kck.st/3snFTDb
Recommended print settings for PLA using Bambu P1/X1 series printers:
0.4mm Nozzle at 0.2 mm layer height
Bottom layers: 4
Top layers: 4
Walls: 2-3
Infill: 25% lightning
Supports: No
Brim: No
Using our recommended settings with a 0.4 mm Nozzle:
Total material needed for a Sip & Roller: ~210g
Total material needed for Sip & Roller Wooden-style Coaster: ~65g
Total material needed for Sip & Roller HP Tracker Coaster: ~90g
With the Bambu printers, I find that 2 walls are still quite strong due to the hotter printing temperatures. On other printers, I'd definitely recommend at least 3 walls or to use a more dense infill like cubic or grid.
If you're using Bambu Studios for your slicer, using the "classic" wall setting will be sufficient to capture the detailing in most mugs. The Elven mug is the only exception so far where I recommend using the "arachne" wall setting to better capture the more intricate detailing.
Date published | 22/02/2024 |
Price | $40.00 |
Material Quantity | 210g + 65g or 90g |
Dimensions | All of the class-themed dice tower can holders will fit on a 180x180mm build plate (you'll just need |
Support Free | YES |