Space Elves Webgate Portal
$6.85 Space Elves Webgate Portal
3D
Back when I played DoW in highschool, I fell in love with the Webway Gate Portal concept. Fast forward a few years and the people at Nottingam dropped a sick model for the Portal, but the price tag scared me. Good luck I had a 3d Printer and some modeling experience under my belt.
++++
I made this proxy when the new rules dropped, and to play with it casually in narrative games with my gaming group. Everyone loved it and told me to upload it, so here I am world!
++++
This is a LIVE model, so I'll be updating it with more versions and items (like the runes you see in my printed version and the renders, and maybe even a version with lots of texture and more detail optimized for Resin instead of FDM.
++++
My design principle is usually SPEED, PRINTABILITY and TOUGHNESS. No brittle edges or superfluous detail. This prints FAST and is FAST to paint and get on the table.
I test pieces before uploading them, and this was indeed a successful print all around.
If you have a problem with the files, any suggestions or comments, drop them below! I love the feedback and will consider implementing changes or alternative designs!
Printed in 3:45 h in PLA in my Bambulab P1P
Settings:
First Layer Speed 50 mm/s
Outer Wall Speed 200 mm/s
Inner Wall Speed 300 mm/s
Top Surface Speed 50 mm/s
Overhang Speed 50 mm/s
Supports Disabled
Brim Disabled
Layer Height 0.34
First Layer Height 0.34
First Layer Line Width 0.5
Outer Wall Line Width 0.4
Inner Wall Line Width 0.45
Top Surface Line Width 0.42
Wall Loops 2
Top Shell Layers 3
Bottom Shell Layers 3
Infill 15%
| Status | Approved |
| Price | $6.85 |
| Time to do | 225 - minutes |
| Material Quantity | 170 |
| Support Free | YES |