We needed some coat hangers in our office and I took this as a challenge to create my first useful 3D printed model.
I printed it on its back and even like this it is quite strong and takes the heavy winter coats without problems.
The eyes of the invaders are used to screw the holder on the wall. There are separate models for covering up this holes. The covers are designed so that they can be tilted in the eye and taken out easily (I hope :) ).
- Invader 1 - 11x8 cm
- Invader 2 - 12x8 cm
- Invader 3 - 9x10 cm
All of them are 3cm deep.
The eye holes are designed for 3mm screws.