Space Saving Multi Hanger
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Space Saving Multi Hanger
Home bits.
Multi hanger adaptor for standard clothes hangers.
----------------------------------------
Bobblejot Website
Bobblejot GitHub
Bobblejot Twitter
Bobblejot Patreon
----------------------------------------
A little Multi hanger based on lots of similar items you can buy everywhere, normally you buy them in packs of 25 or more but my mother only needed a couple so i thought i would knock up a quick design and print her a couple. The beauties of 3d printing, anyway someone else might find it useful as well.
Just hooks over the top of standard hangers.
----------------------------------------
Printed in Real Filament Black PETG purchased from Amazon.
Nozzle : 0.4mm
Layer Height : 0.3mm
Print Temp : 235°C
Bed Temp : 80°C
Print Speed : 60mm/s
Top Layers : 6
Bottom Layers : 4
Perimeters : 3
Infill : 20%
Printed on PEI.
Status | Rejected |