Steamy Dragon Hatchling
$15.00 Steamy Dragon Hatchling
3D
Published 2024-05-06T16:21:39+00:00
Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!
Steamy Dragon Hatchling
Don’t let its cuteness cloud your judgment. It may not be able to breathe fire yet, but underestimating it may be a mist-ake!
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 02 Days 07 Hours 08 Minutes (will vary accord to you printer model)
Approximately Height: 17 cm
COPYRIGHT & SELLING RIGHTS
This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.
To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.
Go commercial and skyrocket your own store with STLFLIX!
USEFUL LINKS
Get to know us a little better!
Website | Instagram | TikTok | Twitter
What are you waiting for? Join thousands of other makers from all around the world.
HAPPY PRINTING!
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK
Line Width/ Nozzle: 0.4 mm
Outer Wall: 0.70 mm
Recommended Layer Height: 0.16 mm
Wall Loops: 3
Top Shell Layers: 0
Bottom Surface Pattern: Monotonic Line
Bottom Shell Layers: 5
Speed For Outer Wall: 30 mm/s
Wall Overlap: 50%
Infill: 0%
Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1mm height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Date published | 06/05/2024 |
| Price | $15.00 |