The Pride of the core
The Pride of the core
3D
Published 2021-12-06T11:01:16+00:00
The Pride of The Core as first seen in Star Wars Empire at war mods. This particular design comes from Sir Topham Hatt on Sketchup
https://3dwarehouse.sketchup.com/model/784c69b3-229f-4f5b-bf70-0f9ec47359a5/Mandator-class-star-dreadnaught-Pride-of-the-Core-Republic-version
The pride of the core is a Dreadnought created by the Republic during or slightly before the clone wars. There are varying lengths described by legends sources but the one i chose was 8,000 meters/ 8km or 4.9 miles. this would mean its about 8 times longer than the Venator class
the first model "pride of the core" is just the full model for modifying the other four are the model being split and scaled to the hot wheels Venator model (which is around 3.75in or 95.25mm) meaning the model when fully completed is around 30in or 761mm long. each section has three holes for 1/8 in or 1/4in dowels. (i forgot which)
all imperfections are caused by moving the file from Sketchup warehouse to tinkercad
| Date published | 06/12/2021 |