THE TURTLE PAINT CADDY
THE TURTLE PAINT CADDY
Published 2020-04-08T18:27:44+00:00
This is a rolling or non rolling caddy I designed for my acrylic 34 mm diameter bottles of paint. I decided to add nylon transition bearings (optional), so it can roll on our kitchen table, when we have paint parties. Easier to pass around the paints.
The bearings are - TOMUM Set of 8pcs CY-8H Mini Nylon Ball Transfer Bearing. A pack of 8 can be purchased on Amazon. If you wish not to have it roll, use the "no bearing" stl file.
If your printer is good with "bridging" then supports should not be needed
You can see how it rolls here:https://youtu.be/8ymccEPbZos
Layer Height - 0.2mm
First Layer - 0.2mm
Infill - 10% (I choose this testing it out) 15% is suitable
No skirt or brim
Supports - I let the slicer do the supports on this one. You may need them for the counter bores on the bottom.
Speed - 45mm/s
Extruder temp - 1st layer 215 C the other layers 210 C
Bed temp - 60 C
Fan speed - 1st layer 0% the other layers 100%
Print time - 19h 25m 13s
Date published | 08/04/2020 |
Time to do | - 1140 minutes |
Material Quantity | 74.39 m |
Dimensions | 50 mm x 196 mm Diameter |