The Unicorn of Light!
$4.00 The Unicorn of Light!
3D
Published 2021-11-09T17:09:55+00:00
The noble unicorn as they should be! A strong and beautiful protector!
This is a 170mm tall model suitable for scaling up and down and for FDM and resin printing.
unicorn_of_light_170mm_solid.stl
Prints on resin with no supports!
A version with separate horn:
unicorn-of-light-170mm-no-horn-solid-1.stl
unicorn-horn-separate-1.stl
The loubie hollowed unicorn model - this works best for a Saturn for resin (although you can reduce scale but you'll need to check the walls - ping me if you have issues) and will work fine for FDM:
unicorn-of-light-loubie-hollow-1.stl
There is also a multi material version (the horn is prited seprate and must be glued in):
unicorn_of_light_multi_material_armour_and_harness.stl
unicorn_of_light_multi_material_body.stl
unicorn_of_light_multi_material_eyes.stl
unicorn_of_light_multi_material_horn.stl
Visions of goodness and light not your thing? Check out the Unicorn Of Darkness:
https://www.myminifactory.com/object/3d-print-the-unicorn-of-darkness-189645
| Date published | 09/11/2021 |
| Price | $4.00 |
Printed the hollow version at roughly 2/3 the original scale to fit my plate. Sadly the version with a seperate horn isn´t hollow.