Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "BaseV3":
1) Start (Left side of the stripe, mine is in blue)
2) Layer 11 (Middle stripe colour, mine is in white)
3) Layer 16 (Right stripe colour, mine is in red)
4) Layer 21 (Overall base colour, mine is in black)
5) Layer 26 (EB logo and Veyron lettering colours, mine is in white

Filament change layer for colours on "BoxBackAssem":
1) Start (Center part of the back wall, mine is in white)
2) Layer 9 (Left side of the wall, mine is in blue)
3) Layer 14 (Right side of the wall, mine is in red)
4) Layer 19 (Bugatti logo background, mine is in grey)
5) Layer 24 (Bugatti logo dots and center background, mine is in red)
6) Layer 29 (EB logo and "Bugatti" outline colours, mine is in black)
7) Layer 34 ("Bugatti" lettering colour, mine is in white

Assembly
The car is tied by wires through the hole in the base

Back plate should slide in nicely into the display base.

Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

Custom display base designs are available for $5! Contact me to discuss what you want!