Tomica Ferrari F40 Display Base
Tomica Ferrari F40 Display Base
Published 2022-06-06T09:47:56+00:00
Custom display base are also available at $5! Contact me to discuss what you want!
Description
The display is designed for Tomica Premium Ferrari F40. If you want the base to fit a different F40 casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV3.STL
*BaseV2.STL (alternate for easy printing)
2) Base back wall:
-BoxBackAssem.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV3" & "BaseV2":
1) Start (Overall base colour, mine is in white)
2) Layer 26 (Ferrari 75th anniversary logo colour, mine is in black)
Filament change layer for colours on "BoxBackAssem":
1) Start (Overall background colour and center stripe in Ferrari logo, mine is in white)
2) Layer 9 (Lower stripe in Ferrari logo, mine is in red)
3) Layer 14 (Upper stripe in Ferrari logo, mine is in green)
4) Layer 19 (Ferrari logo background colour, mine is in yellow)
5) Layer 24 (Ferrari logo outline, overall detail and F40 lettering colour, mine is in black)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Custom display base designs are available for $5! Contact me to discuss what you want!
Date published | 06/06/2022 |