Tomica Ferrari F8 Tributo Display Base
Tomica Ferrari F8 Tributo Display Base
3D
Published 2022-06-24T12:44:25+00:00
Custom display base are also available at $5! Contact me to discuss what you want!
Join my Telegram channel to share any suggestion you wish to be made: https://t.me/+pux0lNikT3E2N2Q9
Description
The display is designed for Tomica Ferrari F8 Tributo, the one seen in pictures have its rims swapped. If you want the base to fit a different Ferrari F8 Tributo casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV4-StripeV2.STL
2) Base back wall:
-BoxBackV4.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV4-Stripe":
1) Start (Lines background colour, mine is in black)
2) Layer 4 (Right stripe colour, mine is in green)
3) Layer 11 (Middle stripe colour, mine is in white)
4) Layer 16 (Left stripe colour, mine is in red)
5) Layer 21 (Overall base colour, mine is black)
Filament change layer for colours on "BoxBackV4":
1) Start (Stripes background colour, mine is in black)
2) Layer 9 (Inner stripe colour, mine is in green)
3) Layer 14 (Outer stripe colour and logo background colour, mine is in red)
4) Layer 19 (Inner stripe colour and all letterring colours, mine is in white)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
If there is any minor edits you want, send me a message or comment!
| Date published | 24/06/2022 |