Toothbrush holder “bubbles”
Support Free
Featured
1,540
views
5
collections
2 comments
Loading comments...
$3.00 Toothbrush holder “bubbles”
3D
Published 2023-07-12T09:12:36+00:00
24
2
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A beautiful toothbrush holder with a unscrewable bottom for easy cleaning.
3MF Multicolor files for bambulab AMS included!
I always had trouble keeping my toothbrush holder clean. Even putting it in the dishwasher did not result in a clean, hygienic cup. That's why I designed a holder that allows you to simply unscrew the bottom and clean it more easily. This way you get a more hygienic result with less effort.
Size assembled ca: 80 x 80 x 100 mm
This is the V4
Photos by Maison Lumiere
Printing Details
- Required build volume: 100x100x100 mm
- Material usage: 90g
- Print time: 7h
- Material: PLA
- Print direction: stls are rotated correctly, check images (yes the body is printed upside down due to the threads)
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none (if you have bad bed adhesion consider using a brim for the body since it is printed upside down)
- Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Technical Information
| Date published | 12/07/2023 |
| Price | $3.00 |
| Support Free | YES |
More Information
Object Parts