Tournament Storage Solution
Tournament Storage Solution
3D
Published 2023-07-31T10:45:01+00:00
This system was designed to be completely modular to allow players to carry their tokens,tools and miniautes easily and simply for events and even local games. I have been using this system for almost a year now at mulltiple large events and it has worked beautifly.
There were all test printed on a stock Ender3 using default settings. I typically run at 20% infill to keep printing times down and the results are very solid. I do recommend printing without any adhesion if you are running the standard size 200x200mm bed as it will fill up most of the best leaving little room for any brims or skirts.
You will need multiple 6x2mm magnets to properly use the system as each tray is held together using 8 to 16 magents depending on the tray.
If you wish to magnatize the miniature carrying tray which I highly recommend there is a template included that can be printed and used to create an outline on either flexible sheet steel or a thin steel plate.
| Date published | 31/07/2023 |
| Support Free | YES |