UFO NIGHT LAMP
$3.40 UFO NIGHT LAMP
3D
Published 2022-01-11T10:35:14+00:00
Was looking over the web to find one for my son's bedroom. Didnt find any that i like so i decided to make one myself! :P
TWO VERSIONS:
One with a clear spiral beam
Another one with a lithophane beam (with people inside)
For the lithophane, it is in two parts. See pictures. ;)
It is a reverse lithophane (graphics are inside) so dont be surprised with this detail! ;)
Everything prints without supports. 100% support free.
Easy to print.
You will need:
-LEDs. I used a LED STRING which is easy to shape in place.
-M3x10mm screws (4x)
INSTRUCTIONS:
-Visual Assembly instructions included (see pictures).
-Do the assembly of the printed parts first (image "step 00") and
then go to the wiring instructions ("step 01" to "step 04").
-Feed the String (LEDs) through the base, then the cone and the bottom of the UFO before anything else. Once done, follow instructions from step 01.
-If you choose the lithophane assembly, follow the instructions
refering to this specific part.
If you have any question, you can message me here or on my facebook page:
https://www.facebook.com/PA1MAKER
| Date published | 11/01/2022 |
| Price | $3.40 |
| Support Free | YES |