Universal small Spoolholder 608
Universal small Spoolholder 608
3D
Published 2017-12-18T17:50:24+00:00
This is a slightly modified version of my universal spoolholder design now suitable for 608 bearings and very small printers. I’ve split the model in several parts. The longest part measures about 68mm. This spoolholder is suitable for spools from Ø170 to Ø210mm.
Two 608 bearings are used per side
The wheels are self-centering to provide a stable guide of the spool.
The wheels have a Ø2mm hole for mounting the wheel-cover.
This spoolholder is the best solution to guide your spool, but also to prevent the filament from jumping over the spool and get tangled.
Print details:
Printed without support, 4 shells and 30% rectangular infill (wheels 100% concentric infill)
Assembly:
1) Glue the connection to the base_middle and then to base_left and base_rigth
2) Insert the bearing
3) Insert the wheel in the bearing
4) Mount the cover with a tip of glue
Optional:
5) I recommend adding one 10x1,5 O-Rings on each wheel so the spool doesn't slip
Printed without support
4 shells and 30% rectangular infill
wheels 100% concentric infill
| Date published | 18/12/2017 |
| Time to do | 180 - 300 minutes |
| Material Quantity | 69g |
| Dimensions | 68x23x40mm |
| Support Free | YES |