Water pot for miniature painting - 6 shapes and sizes
$0.99 Water pot for miniature painting - 6 shapes and sizes
Published 2022-12-07T18:51:55+00:00
Water pot for miniature painting.
With brush holder on top for quick, secure and fast storage. There are a center brush holder option and an "side" brush holder, such you can use the cub, while having a brush stored.
Ridges in bottom and sides to assist brush cleaning.
The water cub comes in 6 shapes:
Two circular sizes, with a radius of 34mm and 84mm with a hight of 87mm
Two octagonal, with mas radius of 34mm and 84mm with a hight of 87mm
A square with a diagonal of 84mm with a hight of 87mm
And a legacy octagonal pot, which is sligly conical and with a diagonal of 73.4 with a height of 86.8mm
Print with 20-50% infill,
Print with 3 walls
Print slow with high temperature to make sure it holds water. I have good experience using PLA max.
Date published | 07/12/2022 |
Price | $0.99 |
Material Quantity | 43 [g] |
Dimensions | 73.4 x 73.4 x 86.8 [mm] |
Support Free | YES |
An image of my pot in use..