Watering can
1,752
views
2
collections
0 comments
Loading comments...
$4.00 Watering can
3D
Published 2023-02-08T15:51:04+00:00
13
0
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A beautiful and robust watering can – designed to be as big as possible for a regular 3D-printer. By printing it 45 degrees rotated, the z-height is used more efficiently while adding to stability due to bigger layers on the handle.
Versions included
1,3L; 1,0L; 0,7L; 0,5L
Please don’t scale the file down on your own since the wall- and handle thickness will be reduced and could cause the can to leak.
Size standing 1,3L (as it will be used): 278 x 160 x 160 mm
Printing Details
- Required build volume for the 1,3L version: 190x190x250 mm
- Material usage: 190g
- Print time: 17h
- Material: PLA
- Print direction: Stl is rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 20%
- Build plate adhesion type: If you have bad bed adhesion, consider using a brim
- Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Technical Information
Date published | 08/02/2023 |
Price | $4.00 |
Support Free | YES |
More Information
Object Parts