Wright Flyer 1903, Power Plant, Additional Part (Dummy Pilot)
Wright Flyer 1903, Power Plant, Additional Part (Dummy Pilot)
3D
Published 2021-03-22T16:30:21+00:00
"Dummy Pilot" is added for "Power Plant" of Wright Flyer 1903" published by following address to explain to relation to Pilot.
https://www.myminifactory.com/object/3d-print-wright-flyer-1903-power-plant-159359
A. The features incorporated in the model are as follows;
① Attached to "Power Plant" as it is
② Can be operated "Hip Cradle"
[Note] The pilot does not operate the engine (Fuel) control lever after the takeoff starts.
B. Assembly Method
Assembly figure with Parts List is attached.
C. STL files
“ws” of last 2 digits of file name means “With Support” special designed.
Total STL files are 10 items.
D. Purchase Parts Information;
- Screws ・・ M2, M3 ・・Adjust screw length by your experience.
E. Total Net Print Time: Approx. 41 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
FDM printer with the size (150 (W) x130 (L) x100 (H)) or larger must be required to make this model.
| Date published | 22/03/2021 |