Yang Candelabra
$7.50 Yang Candelabra
3D
Published 2022-03-29T09:29:57+00:00
Hi, if you like this check out my other creations and support me here
Yang Candelabra is another inversion of my previous designs, low in the middle and high on the outer spreading out the tea lights in a gracious S curve to point along or accross your table or mantle
Inspired by the tube worms that live around Hydrothermal vents at depths of around 2.5 km this series of Candelabra uses T Lights to their best advantage by grouping them together increasing their light out-put.
They lend an elegant functionality to any dining table or home, while mimmicking the gentle sway of marine environs.
The candle holders are designed to keep the heat away from direct contact with the plastic so that the model stays cool
You will need a large priter as it is 260mm in diameter
- Layer height 0.2mm
- Wall count 4 -1.6mm
- Top/Bottom 5 layers -1mm
- Infill 8% Gyroid
- Print speed 70mm/s
- Print time 1d 16h 38m
- Material PLA
| Date published | 29/03/2022 |
| Price | $7.50 |
| Material Quantity | 450 grams |
| Dimensions | 261mm x 261mm x 228mm |
| Support Free | YES |