Arduino Arcade Bartop
Arduino Arcade Bartop
Published 2017-08-23T16:00:57+00:00
Hi!
This is an Arduino Game System in Bartop Format. It's compatible with Arduboy (http://www.arduboy.com) and uses a modification of the recently uploaded Mini Arcade controller (http://www.thingiverse.com/thing:2293054)
Components:
- OLED screen 2.42''
- Arduino Pro Micro Board
- Two white leds
- Speaker/buzzer
- Mini switch (On/off)
- M2x6 screws for mounting the board, the screen and the controller.
All case pieces fits well and don't need screwing or gluying.
Inside the case there's a lot of room for mounting the circuits. For the main board i used a 70x30 mms solderboard (there's mounting holes for 70x50) and a bit of double sided tape for some other components
I've feeded the circuit with a rechargeable 9V battery. As all arduinos you can feed by USB or any kind of battery.
Not my intention doing here a electronics tutorial so visit the Arduino forums and the Arduboy community for tons of info an lot of people pleased to help.
Recently i uploaded a Arduino Handheld based on same hardware but using a 1.3'' OLED screen. (http://www.thingiverse.com/thing:22833499)
For more information about Arduboy Hardware and Games please visit http://community.arduboy.com
And a little video showing the thing alive: https://www.youtube.com/watch?v=APSXYWg92vU
Hope you enjoy it!!
Have fun!!
Printer : BQ Prusa i3 Hephestos
Rafts : No
Supports : No
Resolution : 0.2 for bigger parts and 0.1 for controller lille parts
Date published | 23/08/2017 |
Technology | FDM |
Complexity | Very Easy |
Support Free | YES |