OpenLOCK Stone Bridge (Set 6) Flat Arch
OpenLOCK Stone Bridge (Set 6) Flat Arch
3D
Published 2018-04-25T15:47:42+00:00
Sometimes you want your bridges to have long flat spans instead of arches every few inches. This set adds those pieces for use with normal bridges with walls, wide bridges, narrow bridges and bridges without walls.
For instructions on how to get started with OpenForge, take a look at our tutorials.
OpenForge is now a patron supported project. I use the resources that my patrons give me in order to get the resources to let me create more sophisticated tiles with a greater level of detail. Please, support me, and I’ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our:
- Online catalog and backer site
- Website
- Forums (Mostly we use facebook now)
To add flat arch sections to narrow bridges, print (per flat section):
- 1 of bridge_flat_arch.narrow.no_wall.bottom.stl
- 1 of bridge_flat_arch.narrow.no_wall.top.stl or bridge_flat_arch.narrow.no_wall.top.magnetic.stl
To add flat arch sections to widened bridges with walls, print (per flat section):
- 1 (if you are using center.1x pieces) bridge_flat_arch.wall.center.1x.bottom.stl
- 1 (if you are using center.1x pieces) bridge_flat_arch.wall.center.1x.top.stl or bridge_flat_arch.wall.center.1x.top.magnetic.stl
- 1 (if you are using center.2x pieces) bridge_flat_arch.wall.center.2x.bottom.stl
- 1 (if you are using center.2x pieces) bridge_flat_arch.wall.center.2x.top.stl or bridge_flat_arch.wall.center.2x.top.magnetic.stl
To add flat arch sections to bridges with walls, print (per flat section):
- 2 bridge_flat_arch.wall.bottom.stl
- 2 bridge_flat_arch.wall.top.stl or bridge_flat_arch.wall.top.magnetic.stl
To add flat arch sections to bridges with no walls, print (per flat section):
- 2 bridge_flat_arch.no_wall.bottom.stl
- 2 bridge_flat_arch.no_wall.top.stl or bridge_flat_arch.no_wall.top.magnetic.stl
| Date published | 25/04/2018 |