Adjustable Plant Hanger
Adjustable Plant Hanger
Published 2019-07-12T08:15:11+00:00
This is an adjustable plant hanger/hook. The design is meant to slip over the object your hanging off of. This way you don't have to put holes in your walls, decks, and other surfaces.
It comes in three parts. A part to slip over the object you're hanging off of, a hook, and a wedge for support. All the parts have holes for 1/8 screws and nuts. With multiple holes, you can adjust how far the hook sticks out with wedges for each size. There are three wedge sizes with and without countersinks.
To combine these separate pieces, you'll need screws (Unless you have a bed big enough to print it as one object). The holes are made for 1/8 screws in diameter and I used 1 inch and 1 1/12 (1.50) inch screws with nuts.
If you want to make more adjustments, you can find the model here: https://www.tinkercad.com/things/hknFoFwlOSW
Date published | 12/07/2019 |
Support Free | YES |