Two Trees Sapphire S CR10 All Metal Hotend Carrier
Two Trees Sapphire S CR10 All Metal Hotend Carrier
Published 2019-08-27T16:59:49+00:00
Carrier for CR 10 clone all metal hotend
Recomend you print in PETG if you have some but PLA works fine for lower temps 200c
Clear Hotend and top mount holes to 3.5mm
Clear Carrage mount holes to 4mm
Use the Belt Griper on the front belts and use a mirrored version of Mejon excellent Belt Tensioner for the rear.
Link for Belt Tensioner https://www.thingiverse.com/thing:3730521
Cheap clone hotends need to be reamed before use as the bores of the body, heatbrake and nozzel are never true.
PLA Settings
Nozzle Diameter 0.4 Layer Hight 0.18 Perimeter 2
Infill 30%
You may have to adjust thise settings for your printer, material and methods
Print with Brim 2 layers
Fan speed 25% all the way
Speed 50mm/s
Date published | 27/08/2019 |