Smurf_SVK's Print of Iron Man MK3 Articulated Figure
Community Print 3D Print of Iron Man MK3 Articulated Figure
Published 2020-08-15T17:05:19+00:00
2
1
Printed on: Prusa i3 MK3
Material: PETG
Description
Great model! Several tips for the fellow makers:1. make sure you separate the original from the mirrored parts as the differences are so little it might be quite hard to figure out which is left and which is right after you mix them.2. If you have troubles fitting the joints, use hot water or hair dryer to soften the material. Same if the joints get too loose, soften a bit and push the joint holding points together with pliers gently.3. print eyes, lenses and the core from Glow in the Dark material!