rmeden's Print of Large Pendulum Wall Clock
Community Print 3D Print of Large Pendulum Wall Clock
Published 2020-10-21T01:59:44+00:00
1
4
Description
I've decided that due to the lack of vertical detail to print things at 0.3 layers with a 6mm nozzle (on a Prusa i3 MK3),
Steve suggested I share the results. I haven't tried to put the clock together yet, but I've printed all the parts with a 0.6mm nozzle and mostly with 0.3mm layers. (perimeters are set per Steve's specs). In the attached picture, the gear on the left is 0.6mm nozzle, 0.3mm layer, and the right is 0.4mm nozzle 0.15mm layer. Looks identical to me! You do barely see layer lines with the bigger nozzle, but no big deal.
Print times are amazing. gear2-54-12 went from 253 to 91 minutes ( 65% reduction!) Other prints were similar. *MUCH* faster, and the quality looks to be there (again, I haven't finished yet)