snowfox2's Print of X-Wing
Community Print 3D Print of X-Wing
Published 2021-05-02T11:13:12+00:00
4
0
Printed on: Creality CR-6 SE
Material: PLA
Description
Thanks So much for releasing this design.
Printed on CR6-SE which I have only had for 2 months for my nephews’ birthday.
Had a lot of fun building and painting this. For anyone wanting to give it a go here are the details and stats of my Print:
• Cura 4.9, Standard Quality 0.2m, 20% infill, 7mm Raft – No supports
• PLA+ - White & Silk Silver (Cockpit)
• Total Parts: 48
• Time:
o Print: 152hrs
o Construction 1.5hrs
o Paint: 5hrs
• Filament Weight: 918g
• Filament Length: 305.35m
• Printing groups (Showing part number and time)
• Print 1: 1, 2, 3, 6 – 23.5hrs
• Print 2: 8x2, 9x2 – 47.3hrs
• Print 3: 10x4,12,14,15,19,20,21,22 – 19.1 hrs
• Print 4: 4, 5, 16x4, 17x4, - 27hrs
• Print 5: 11, 13, 18, 27 – 15hrs
• Print 6: 7, 23x4, 24x4, 25x4 = 15hrs
• Print 7: 26 = 5.1 hrs
Recommendations: All my parts were printed 20% infill, but I had a few breaks that I had to glue. If was to print this again I would make the following part numbers 100% infill to strengthen them, noting that this would increase the print time:
3, 4, 5, 16 (especially this part of all the others), 18, 19, 20, 21, 22, 23, 24, 25, 26 (Gives it added weight