Official Traveller Small Craft
Created by 2ndDynasty
28mm scale spacecraft from the Traveller RPG universe for 3D printing and a limited physical Launch print run. This is just a stand in page for late pledges. For details, see the Kickstarter. Full Release: November 27
Official Traveller Small Craft
Created by 2ndDynasty- Pledges (8)
- Add-ons (22)
Pledges
22 backers
USD 22.00
20-Ton Launch
The 20-ton Launch is quite a small vessel in the Traveller universe. Just 20 metres in length it is often used as a shuttle for cargo and crew on larger vessels.
A versatile platform used for a wide range of missions, such as for shuttling passengers, cargo, or acting as a lifeboat, the Launch is cheap, slow and ubiquitous.
It features a cockpit, airlock, fresher (WC), a cargo bay with both a main cargo area as well as an underfloor cargo area, and a small engineering room where the powerplant and manoeuvre drive is situated.
The dimensions of the Launch at 1:59/28mm
- Length: 339.2mm (13.4in)
- Beam: 89.1mm (3.5in)
- Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 20metres (65.7ft)
- Beam: 5.3m (17.2ft)
- Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
3MF build plates are provided for quick prints - Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Get the STL-files for our 28mm 20-Ton Launch to print for yourself on your own 3D printer or with a 3D print service.
1 backer
USD 27.00
30-Ton Ship's Boat
A versatile vessel with a powerful M-Drive, the Ship's Boat can transport passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat has an ample airlock, vault, fresher, passenger section, cargo section and drive compartment. The layout overall offers a wide range of flexibility in play styles.
The dimensions of the 30-Ton Ship's Boat at 1:59/28mm
- Length: 479.9mm (18.9in)
Beam: 89.1mm (3.5in)
Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 28.3metres (92.9ft)
Beam: 5.3m (17.2ft)
Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers
- disembarking on a landing pad
Sliding Garage Doors - For easy loading of cargo and luggage - Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Get the STL-files for the 30-Ton Ship's Boat to print for yourself on your own 3D printer or with a 3D print service.
18 backers
USD 32.00
40-Ton Pinnace
Named after small craft of the age of sail, the Pinnace is fast, can move a fair amount of cargo, and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship.
The Pinnace features functioning canards, swing wings, a fold out ramp, removable engine housing panels, and an underfloor power plant compartment.
The dimensions of the Pinnace at 1:59/28mm
- Length: 473.6mm (18.6in)
Beam: 339mm (13.3in)
Draught: 117mm (4.6in)
The dimensions at scale
- Length: 27.9metres (91.7ft)
Beam: 20m (65.6ft)
Draught: 6.9m (22.6ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Get the STL-files for the 40-Ton Pinnace to print for yourself on your own 3D printer or with a 3D print service.
11 backers
USD 37.00
50-Ton Modular Cutter
One of the most flexible vessels in the Traveller universe, the Modular Cutter is designed to port 30-ton cargo modules and is analogous to a space semitrailer truck.
We have designed our Modular Cutter to be able to detach and replace the 30-ton module just as it would in the Traveller universe.
The dimensions of the Modular Cutter at 1:59/28mm
- Length: 617.4mm (24.3in)
Beam: 96.5mm (3.8in)
Draught: 105.9mm (4.2in)
The dimensions at scale
- Length: 36.4metres (119.5ft)
Beam: 5.7m (18.7ft)
Draught: 6.2m (20.5ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Get the STL-files for the 50-Ton Modular Cutter to print for yourself on your own 3D printer or with a 3D print service.
58 backers
USD 90.00
Grant Cab Module
An alternative cab for our Official Traveller. Originally offered as a social stretch goal from our Small Craft Kickstarter, the Grant Cab is based on an old school Traveller design and features an elongated nose, Beowulf-like bow, RCS clusters, forward stabilisers, and internally, makes the cab into a suitable environment for long hauls.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Passenger Module
This 30-Ton module variant for the Modular Cutter is designed to transport a passengers from orbit to a planet. It can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Passenger Module originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
20-Ton Launch Passenger Cabin
This cabin is especially made for the Traveller small craft 20-ton Launch. The cabin is designed to make it easy to rebuild your Launch into a passenger shuttle.
The standard 20-Ton Launch is a versatile ship used for a wide range of missions - often on a larger vessel - such as shuttling passengers, cargo, or acting as a lifeboat.
The Launch is not included in this package, but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
28mm Official Traveller 30-Ton Slow Boat
USD 29.95
An official Traveller Small Craft. This 30-ton vessel commonly referred to as a Slow Boat features a streamlined hull including fixed wings and trades thrust for greater cargo capacity.
The Slow Boat originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured in January of 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
- FDM optimised
- 3MF build plates for quick and easy printing
- Functional airlock and cargo bay doors
- Lighting ready (we used a 3 volt coincell battery with a 5mm blue LED)
- Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Vehicle Module
IMPORTANT! Vechicle not included, the G-Carrier can be found here.
This 30-Ton Module variant for the Modular Cutter is designed to transport a vehicle from orbit to a planet. The module is designed to work with our Official Traveller G-Carrier and Official Traveller Modular Cutter.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft - Grant Engine Module
USD 8.95
The Grant Engine Module is an alternative engine section compatible with our Small Craft, primarily the modular cutter, ship's boat, launch and gig. It uses the design language attributed to classic Traveller artist, Glenn Grant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
50-Ton Modular Cutter
One of the most flexible vessels in the Traveller universe, the Modular Cutter is designed to port 30-ton cargo modules and is analogous to a space semitrailer truck.
We have designed our Modular Cutter to be able to detach and replace the 30-ton module just as it would in the Traveller universe.
The dimensions of the Modular Cutter at 1:59/28mm
- Length: 617.4mm (24.3in)
Beam: 96.5mm (3.8in)
Draught: 105.9mm (4.2in)
The dimensions at scale
- Length: 36.4metres (119.5ft)
Beam: 5.7m (18.7ft)
Draught: 6.2m (20.5ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
40-Ton Pinnace
Named after small craft of the age of sail, the Pinnace is fast, can move a fair amount of cargo, and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship.
The Pinnace features functioning canards, swing wings, a fold out ramp, removable engine housing panels, and an underfloor power plant compartment.
The dimensions of the Pinnace at 1:59/28mm
- Length: 473.6mm (18.6in)
Beam: 339mm (13.3in)
Draught: 117mm (4.6in)
The dimensions at scale
- Length: 27.9metres (91.7ft)
Beam: 20m (65.6ft)
Draught: 6.9m (22.6ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Ship's Boat
A versatile vessel with a powerful M-Drive, the Ship's Boat can transport passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat has an ample airlock, vault, fresher, passenger section, cargo section and drive compartment. The layout overall offers a wide range of flexibility in play styles.
The dimensions of the 30-Ton Ship's Boat at 1:59/28mm
- Length: 479.9mm (18.9in)
Beam: 89.1mm (3.5in)
Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 28.3metres (92.9ft)
Beam: 5.3m (17.2ft)
Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers
- disembarking on a landing pad
Sliding Garage Doors - For easy loading of cargo and luggage - Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
20-Ton Launch
The 20-ton Launch is quite a small vessel in the Traveller universe. Just 20 metres in length it is often used as a shuttle for cargo and crew on larger vessels.
A versatile platform used for a wide range of missions, such as for shuttling passengers, cargo, or acting as a lifeboat, the Launch is cheap, slow and ubiquitous.
It features a cockpit, airlock, fresher (WC), a cargo bay with both a main cargo area as well as an underfloor cargo area, and a small engineering room where the powerplant and manoeuvre drive is situated.
The dimensions of the Launch at 1:59/28mm
- Length: 339.2mm (13.4in)
- Beam: 89.1mm (3.5in)
- Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 20metres (65.7ft)
- Beam: 5.3m (17.2ft)
- Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
3MF build plates are provided for quick prints - Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Hemisphere Cab
This is an alternative cab for the Modular Cutter and other Small Craft from the Traveller Small Craft line of official Traveller RPG products. The hemisphere cab rounds out the cab of the small craft and makes it more in line with the original modular cutter designs.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-ton Ship's Boat Passenger Cabin
This cabin is especially made for the Traveller small craft 30-ton Ship's Boat. The cabin is designed to make it easy to reconstruct your ship into a passenger vessel.
The standard 30-Ton Ship's Boat is a versatile ship used for a wide range of missions such as transporting passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat is not included but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
40-Ton Pinnace Passenger Cabin
This cabin is especially made for the Traveller small craft 40-ton Pinnace. The cabin is designed to replace the cargo area and make it easy to rebuild your ship into a full passenger vessel.
The standard 40-Ton Pinnace is a fast ship, it can move a fair amount of cargo and has some room for passengers and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship. The 40-ton Pinnace is not included in this package but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
28mm Official Traveller 40-ton Slow Pinnace
USD 34.95
As an official Traveller Small Craft this 40-ton vessel is a variant of the 40-ton Pinnace that trades out its swing wings, canards and decreases its power to create greater cargo capacity.
The Slow Pinnace originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured later in 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
FDM optimised
3MF build plates for quick and easy printing
Functional airlock and cargo bay doors
Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft Cradle
USD 14.95
Compatible with all our official Traveller Small Craft aside from the modular cutter, this modular docking area can be used to represent a part of a larger ship, space station or base and connects in a modular fashion using the OpenLOCK system.
The length of the tube can be customised to change the position of the loading airlocks and can be expanded upon easily using the 40 parts provided.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Official Traveller 30-Ton Fuel Module
USD 9.95
This 30-Ton Fuel Module can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Fuel Module originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Get the digital STL files for all four of our Small Craft, plus any unlocked digital stretch goals
400 backers
USD 116.50
Grant Cab Module
An alternative cab for our Official Traveller. Originally offered as a social stretch goal from our Small Craft Kickstarter, the Grant Cab is based on an old school Traveller design and features an elongated nose, Beowulf-like bow, RCS clusters, forward stabilisers, and internally, makes the cab into a suitable environment for long hauls.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Passenger Module
This 30-Ton module variant for the Modular Cutter is designed to transport a passengers from orbit to a planet. It can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Passenger Module originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
20-Ton Launch Passenger Cabin
This cabin is especially made for the Traveller small craft 20-ton Launch. The cabin is designed to make it easy to rebuild your Launch into a passenger shuttle.
The standard 20-Ton Launch is a versatile ship used for a wide range of missions - often on a larger vessel - such as shuttling passengers, cargo, or acting as a lifeboat.
The Launch is not included in this package, but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
28mm Official Traveller 30-Ton Slow Boat
USD 29.95
An official Traveller Small Craft. This 30-ton vessel commonly referred to as a Slow Boat features a streamlined hull including fixed wings and trades thrust for greater cargo capacity.
The Slow Boat originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured in January of 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
- FDM optimised
- 3MF build plates for quick and easy printing
- Functional airlock and cargo bay doors
- Lighting ready (we used a 3 volt coincell battery with a 5mm blue LED)
- Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Vehicle Module
IMPORTANT! Vechicle not included, the G-Carrier can be found here.
This 30-Ton Module variant for the Modular Cutter is designed to transport a vehicle from orbit to a planet. The module is designed to work with our Official Traveller G-Carrier and Official Traveller Modular Cutter.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft - Grant Engine Module
USD 8.95
The Grant Engine Module is an alternative engine section compatible with our Small Craft, primarily the modular cutter, ship's boat, launch and gig. It uses the design language attributed to classic Traveller artist, Glenn Grant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
50-Ton Modular Cutter
One of the most flexible vessels in the Traveller universe, the Modular Cutter is designed to port 30-ton cargo modules and is analogous to a space semitrailer truck.
We have designed our Modular Cutter to be able to detach and replace the 30-ton module just as it would in the Traveller universe.
The dimensions of the Modular Cutter at 1:59/28mm
- Length: 617.4mm (24.3in)
Beam: 96.5mm (3.8in)
Draught: 105.9mm (4.2in)
The dimensions at scale
- Length: 36.4metres (119.5ft)
Beam: 5.7m (18.7ft)
Draught: 6.2m (20.5ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
40-Ton Pinnace
Named after small craft of the age of sail, the Pinnace is fast, can move a fair amount of cargo, and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship.
The Pinnace features functioning canards, swing wings, a fold out ramp, removable engine housing panels, and an underfloor power plant compartment.
The dimensions of the Pinnace at 1:59/28mm
- Length: 473.6mm (18.6in)
Beam: 339mm (13.3in)
Draught: 117mm (4.6in)
The dimensions at scale
- Length: 27.9metres (91.7ft)
Beam: 20m (65.6ft)
Draught: 6.9m (22.6ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Ship's Boat
A versatile vessel with a powerful M-Drive, the Ship's Boat can transport passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat has an ample airlock, vault, fresher, passenger section, cargo section and drive compartment. The layout overall offers a wide range of flexibility in play styles.
The dimensions of the 30-Ton Ship's Boat at 1:59/28mm
- Length: 479.9mm (18.9in)
Beam: 89.1mm (3.5in)
Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 28.3metres (92.9ft)
Beam: 5.3m (17.2ft)
Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers
- disembarking on a landing pad
Sliding Garage Doors - For easy loading of cargo and luggage - Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
20-Ton Launch
The 20-ton Launch is quite a small vessel in the Traveller universe. Just 20 metres in length it is often used as a shuttle for cargo and crew on larger vessels.
A versatile platform used for a wide range of missions, such as for shuttling passengers, cargo, or acting as a lifeboat, the Launch is cheap, slow and ubiquitous.
It features a cockpit, airlock, fresher (WC), a cargo bay with both a main cargo area as well as an underfloor cargo area, and a small engineering room where the powerplant and manoeuvre drive is situated.
The dimensions of the Launch at 1:59/28mm
- Length: 339.2mm (13.4in)
- Beam: 89.1mm (3.5in)
- Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 20metres (65.7ft)
- Beam: 5.3m (17.2ft)
- Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
3MF build plates are provided for quick prints - Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft Miniatures
USD 16.00
The 1:270 and tactical versions of the official Traveller small crafts the Launch, the Ship's Boat, the Pinnace and the Modular Cutter. Also includes the 1:270 and tactical versions of the Rampart Light Fighter and the Two-Seated Rampart.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Rampart Two-Seat Variant
USD 9.95
This is our two-seated variant of the Official Traveller 28mm Rampart-class Light Fighter. This variant, sometimes called the FL-128/2 is used for training exercises and battlefield command. The command and control version has the pilot seated at the nose and the RIO at the rear. In a trainer version, the trainee sits in the front seat, with the instructor in the rear seat.
The aerofighter design has a removable cockpit canopy, swappable landing gear, and modular weapons system.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
G-Carrier
USD 15.95
Sponsored by Traveller Small Craft Kickstarter Campaign
If you're a fan of old-school Traveller and its iconic 80s style, you're in for a treat. We've meticulously designed and crafted a 28mm STL file set for 3D printing that brings to life the beloved G-Carrier, a classic from the golden era of sci-fi gaming. Get ready to embark on thrilling interstellar adventures with this timeless vehicle model!
Based on the vintage Traveller stats, the G-Carrier is an 8-ton marvel of engineering. It's built to transport your squad from planetary surfaces to the vastness of space and back. The G-Carrier boasts an array of features, including a turret for added firepower, a rear ramp for easy entry and exit, an escape hatch for quick getaways, and a side hatch for flexible access. With heavy armor plating, your squad will be well-protected during your interstellar escapades.
- Minimal Support Required: We understand the importance of easy printing. That's why our G-Carrier design has been optimized to minimize the need for supports. You'll spend less time on post-processing and more time enjoying your printed models.
- Includes Build Plate: To further enhance your 3D printing experience, we've included a build plate. It's designed to make the printing process more convenient and efficient, ensuring your G-Carrier comes out just the way you want it.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Rampart Light Fighter
USD 8.00
An Official Traveller 28mm Rampart-class Light Fighter, this vehicle is all engine, allowing the pilot to quickly intercept in atmosphere or deep space at constant accellerations of up to 6G.
This is a single seat variant. Comes with stand and landing gear options.
For more general information, see the Traveller wiki:
https://wiki.travellerrpg.com/Rampart_class_Light_Fighter
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Hemisphere Cab
This is an alternative cab for the Modular Cutter and other Small Craft from the Traveller Small Craft line of official Traveller RPG products. The hemisphere cab rounds out the cab of the small craft and makes it more in line with the original modular cutter designs.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-ton Ship's Boat Passenger Cabin
This cabin is especially made for the Traveller small craft 30-ton Ship's Boat. The cabin is designed to make it easy to reconstruct your ship into a passenger vessel.
The standard 30-Ton Ship's Boat is a versatile ship used for a wide range of missions such as transporting passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat is not included but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
40-Ton Pinnace Passenger Cabin
This cabin is especially made for the Traveller small craft 40-ton Pinnace. The cabin is designed to replace the cargo area and make it easy to rebuild your ship into a full passenger vessel.
The standard 40-Ton Pinnace is a fast ship, it can move a fair amount of cargo and has some room for passengers and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship. The 40-ton Pinnace is not included in this package but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
28mm Official Traveller 40-ton Slow Pinnace
USD 34.95
As an official Traveller Small Craft this 40-ton vessel is a variant of the 40-ton Pinnace that trades out its swing wings, canards and decreases its power to create greater cargo capacity.
The Slow Pinnace originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured later in 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
FDM optimised
3MF build plates for quick and easy printing
Functional airlock and cargo bay doors
Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft Cradle
USD 14.95
Compatible with all our official Traveller Small Craft aside from the modular cutter, this modular docking area can be used to represent a part of a larger ship, space station or base and connects in a modular fashion using the OpenLOCK system.
The length of the tube can be customised to change the position of the loading airlocks and can be expanded upon easily using the 40 parts provided.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Official Traveller 30-Ton Fuel Module
USD 9.95
This 30-Ton Fuel Module can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Fuel Module originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Get the Launch, Ship's Boat, Pinnace and Modular Cutter, all the unlocked stretch goals, as well as the G-Carrier, both Rampart Fighter variants, the Small Craft ship miniatures and the Ian Stead Small Craft Ship Miniatures.
16 backers
USD 423.50
Grant Cab Module
An alternative cab for our Official Traveller. Originally offered as a social stretch goal from our Small Craft Kickstarter, the Grant Cab is based on an old school Traveller design and features an elongated nose, Beowulf-like bow, RCS clusters, forward stabilisers, and internally, makes the cab into a suitable environment for long hauls.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Passenger Module
This 30-Ton module variant for the Modular Cutter is designed to transport a passengers from orbit to a planet. It can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Passenger Module originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Type S Scout/Courier
USD 80.00
Our glorious 28mm-scale, highly detailed Type S Scout/Courier, as well as the stretch goals (nine in total) which allow a high degree of customisation of the ship, and a 15mm base ship variant for those looking for a more classic Traveller scale.
Includes
- 28mm Type S Scout STL Files
28mm Type S Scout Stretch Goals STL Files
15mm Type S Scout STL Files
Traveller Starship Miniatures KS Edition
USD 69.00
This is the Traveller Starship Miniatures Kickstarter Edition, i.e. both the core ships and the ships that where included in the Stretch Goals, a total of 52 starships in two different scales, 26 in each. The ships, which featured most prominently in the Traveller5 Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to use two scales.
The first, 1:270 scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is Tactical scale, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The core ships feature a variety of popular classic Traveller designs, all originally visualised by Ian Stead, aside from our own Murphy-class Type S Scout/Courier (both versions of the Type S have been provided for collectors). From merchant vessels to system patrol boats and mercenary cruisers, they range in size from 100 to 800 tons (as per the Traveller rules).
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Type A Free Trader Beowulf KS Edition
USD 127.00
The most ubiqutous ship of the Third Imperium is the Type A Free Trader, commonly known as the Beowulf-class. This Official Traveller vessel has been beautifully recreated from Traveller 5 deck plans into a 28mm scale (1:59) monstrosity that brings the most iconic Traveller player ship onto your tabletop.
Features:
- 28mm Type A Free Trader Beowulf STL Files
- Three stackable decks that are easily removed for easy access and play
- Designed to easily install third party lighting from Zoromerlights.com
- Customise the interior with accessories, such as larger engines or jump drives
- Print rapidly with 3MF build plates
and 16 Stretch Goals:
- Jump 2
- Fuel Bladder
- Decals
- Power 2
- Sardine Low Berths
- Dead Astronaut
- Manoeuvre 2
- 30ton Gig Deckplans
- Rear Airlock
- Mezzanine
- Workshop
- Garage 3D Printer
- Garage Workshop
- Vacc Suit Locker
- Quad Beam Laser Turret
- Life Support Controls
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Gig
USD 22.00
Official Traveller Spaceship Created by Craig Pay in collaboration with Ian Stead, the Gig represents the small craft belonging to the Type CE Gazelle-class Close Escort. Rendered here in 28mm glory, the design is based on Ian Stead's sketchup, with interior components from 2nd Dynasty.
Craig has meticulously written detailed instructions which are included with the files.
28mm Type J Seeker
Now with parts that lets you install light kits!
Get our Rob Caswell-style Type S conversion to the Type J Seeker prospecting and mining ship, featuring a classic traveller rear section, ore bays and pulse laser turret. This standalone version does not require the original Type S STL files to build.
Includes
- 28 mm Type J Seeker STL Files
28mm Traveller Character Miniatures
USD 53.00
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc in different poses, a mixture of Vargr soldiers and pirates, Aslan, Hivers and more, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Traveller Grav Pack
USD 22.00
Even though most air rafts are capable of reaching orbit they are not intended for extended flight in space. Instead are air rafts a good way to travel around on many worlds in the Traveller universe.
Air rafts comes in several different models and this package includes a van, a grav bike and a base two-seater Air Raft and a four seater and tray back options with a Saloon, Coupe and Pickup variant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
G-Carrier
USD 15.95
Sponsored by Traveller Small Craft Kickstarter Campaign
If you're a fan of old-school Traveller and its iconic 80s style, you're in for a treat. We've meticulously designed and crafted a 28mm STL file set for 3D printing that brings to life the beloved G-Carrier, a classic from the golden era of sci-fi gaming. Get ready to embark on thrilling interstellar adventures with this timeless vehicle model!
Based on the vintage Traveller stats, the G-Carrier is an 8-ton marvel of engineering. It's built to transport your squad from planetary surfaces to the vastness of space and back. The G-Carrier boasts an array of features, including a turret for added firepower, a rear ramp for easy entry and exit, an escape hatch for quick getaways, and a side hatch for flexible access. With heavy armor plating, your squad will be well-protected during your interstellar escapades.
- Minimal Support Required: We understand the importance of easy printing. That's why our G-Carrier design has been optimized to minimize the need for supports. You'll spend less time on post-processing and more time enjoying your printed models.
- Includes Build Plate: To further enhance your 3D printing experience, we've included a build plate. It's designed to make the printing process more convenient and efficient, ensuring your G-Carrier comes out just the way you want it.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
20-Ton Launch Passenger Cabin
This cabin is especially made for the Traveller small craft 20-ton Launch. The cabin is designed to make it easy to rebuild your Launch into a passenger shuttle.
The standard 20-Ton Launch is a versatile ship used for a wide range of missions - often on a larger vessel - such as shuttling passengers, cargo, or acting as a lifeboat.
The Launch is not included in this package, but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
28mm Official Traveller 30-Ton Slow Boat
USD 29.95
An official Traveller Small Craft. This 30-ton vessel commonly referred to as a Slow Boat features a streamlined hull including fixed wings and trades thrust for greater cargo capacity.
The Slow Boat originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured in January of 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
- FDM optimised
- 3MF build plates for quick and easy printing
- Functional airlock and cargo bay doors
- Lighting ready (we used a 3 volt coincell battery with a 5mm blue LED)
- Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-Ton Vehicle Module
IMPORTANT! Vechicle not included, the G-Carrier can be found here.
This 30-Ton Module variant for the Modular Cutter is designed to transport a vehicle from orbit to a planet. The module is designed to work with our Official Traveller G-Carrier and Official Traveller Modular Cutter.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft - Grant Engine Module
USD 8.95
The Grant Engine Module is an alternative engine section compatible with our Small Craft, primarily the modular cutter, ship's boat, launch and gig. It uses the design language attributed to classic Traveller artist, Glenn Grant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Hemisphere Cab
This is an alternative cab for the Modular Cutter and other Small Craft from the Traveller Small Craft line of official Traveller RPG products. The hemisphere cab rounds out the cab of the small craft and makes it more in line with the original modular cutter designs.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
30-ton Ship's Boat Passenger Cabin
This cabin is especially made for the Traveller small craft 30-ton Ship's Boat. The cabin is designed to make it easy to reconstruct your ship into a passenger vessel.
The standard 30-Ton Ship's Boat is a versatile ship used for a wide range of missions such as transporting passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat is not included but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
40-Ton Pinnace Passenger Cabin
This cabin is especially made for the Traveller small craft 40-ton Pinnace. The cabin is designed to replace the cargo area and make it easy to rebuild your ship into a full passenger vessel.
The standard 40-Ton Pinnace is a fast ship, it can move a fair amount of cargo and has some room for passengers and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship. The 40-ton Pinnace is not included in this package but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
30-Ton Ship's Boat
A versatile vessel with a powerful M-Drive, the Ship's Boat can transport passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat has an ample airlock, vault, fresher, passenger section, cargo section and drive compartment. The layout overall offers a wide range of flexibility in play styles.
The dimensions of the 30-Ton Ship's Boat at 1:59/28mm
- Length: 479.9mm (18.9in)
Beam: 89.1mm (3.5in)
Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 28.3metres (92.9ft)
Beam: 5.3m (17.2ft)
Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers
- disembarking on a landing pad
Sliding Garage Doors - For easy loading of cargo and luggage - Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
20-Ton Launch
The 20-ton Launch is quite a small vessel in the Traveller universe. Just 20 metres in length it is often used as a shuttle for cargo and crew on larger vessels.
A versatile platform used for a wide range of missions, such as for shuttling passengers, cargo, or acting as a lifeboat, the Launch is cheap, slow and ubiquitous.
It features a cockpit, airlock, fresher (WC), a cargo bay with both a main cargo area as well as an underfloor cargo area, and a small engineering room where the powerplant and manoeuvre drive is situated.
The dimensions of the Launch at 1:59/28mm
- Length: 339.2mm (13.4in)
- Beam: 89.1mm (3.5in)
- Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 20metres (65.7ft)
- Beam: 5.3m (17.2ft)
- Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
3MF build plates are provided for quick prints - Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
40-Ton Pinnace
Named after small craft of the age of sail, the Pinnace is fast, can move a fair amount of cargo, and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship.
The Pinnace features functioning canards, swing wings, a fold out ramp, removable engine housing panels, and an underfloor power plant compartment.
The dimensions of the Pinnace at 1:59/28mm
- Length: 473.6mm (18.6in)
Beam: 339mm (13.3in)
Draught: 117mm (4.6in)
The dimensions at scale
- Length: 27.9metres (91.7ft)
Beam: 20m (65.6ft)
Draught: 6.9m (22.6ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
50-Ton Modular Cutter
One of the most flexible vessels in the Traveller universe, the Modular Cutter is designed to port 30-ton cargo modules and is analogous to a space semitrailer truck.
We have designed our Modular Cutter to be able to detach and replace the 30-ton module just as it would in the Traveller universe.
The dimensions of the Modular Cutter at 1:59/28mm
- Length: 617.4mm (24.3in)
Beam: 96.5mm (3.8in)
Draught: 105.9mm (4.2in)
The dimensions at scale
- Length: 36.4metres (119.5ft)
Beam: 5.7m (18.7ft)
Draught: 6.2m (20.5ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Rampart Light Fighter
USD 8.00
An Official Traveller 28mm Rampart-class Light Fighter, this vehicle is all engine, allowing the pilot to quickly intercept in atmosphere or deep space at constant accellerations of up to 6G.
This is a single seat variant. Comes with stand and landing gear options.
For more general information, see the Traveller wiki:
https://wiki.travellerrpg.com/Rampart_class_Light_Fighter
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Official Traveller 40-ton Slow Pinnace
USD 34.95
As an official Traveller Small Craft this 40-ton vessel is a variant of the 40-ton Pinnace that trades out its swing wings, canards and decreases its power to create greater cargo capacity.
The Slow Pinnace originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured later in 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
FDM optimised
3MF build plates for quick and easy printing
Functional airlock and cargo bay doors
Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Rampart Two-Seat Variant
USD 9.95
This is our two-seated variant of the Official Traveller 28mm Rampart-class Light Fighter. This variant, sometimes called the FL-128/2 is used for training exercises and battlefield command. The command and control version has the pilot seated at the nose and the RIO at the rear. In a trainer version, the trainee sits in the front seat, with the instructor in the rear seat.
The aerofighter design has a removable cockpit canopy, swappable landing gear, and modular weapons system.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft Miniatures
USD 16.00
The 1:270 and tactical versions of the official Traveller small crafts the Launch, the Ship's Boat, the Pinnace and the Modular Cutter. Also includes the 1:270 and tactical versions of the Rampart Light Fighter and the Two-Seated Rampart.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Small Craft Cradle
USD 14.95
Compatible with all our official Traveller Small Craft aside from the modular cutter, this modular docking area can be used to represent a part of a larger ship, space station or base and connects in a modular fashion using the OpenLOCK system.
The length of the tube can be customised to change the position of the loading airlocks and can be expanded upon easily using the 40 parts provided.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Official Traveller 30-Ton Fuel Module
USD 9.95
This 30-Ton Fuel Module can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Fuel Module originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
This is our catch up reward, with all our officially licensed Traveller products to date!
4 backers
USD 1,059.00
Vacc Suits - Space Walk Traveller Miniature
Take a walk in space with this 28mm vacc suit, that comes in both supported and unsupported versions.
There are three other vacc suits in different poses: walking without the helmet, in zero-g and vacc suits hanging. The vacc suits also come in a package: Vacc Suits.
The vacc suits are sculpted by Kyoushuneko.
This package includes:
- Vacc Suit - Space Walk - 28mm - Presupported.stl
Vacc Suit - Space Walk - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Android Seated
Every ship should have a maintenance android for heavy lifting and fixing things in places where it is too dangerous for humanoids to go. In this product it is seated. The android comes in three more poses: working, standing and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also supportfree versions.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Maintenance android seated
Floor Airlocks
Expand your Starship deck plans with these floor airlock tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- EA - Frame Airlock
- EA - Airlock Door
- E - Frame Airlock
- E - Airlock Hatch
Vacc Suits - No Helmet Traveller Miniature
This package contains a character in a vacc suit with the helmet off, in both supported and unsupported versions.
There are three other vacc suits in different poses: space walk, in zero-g and vacc suits hanging. The vacc suits also come in a package: Vacc Suits.
The vacc suits are sculpted by Kyoushuneko.
This package includes:
- Vacc Suit - Space Walk - No Helmet - 28mm - Presupported.stl
Vacc Suit - Space Walk - No Helmet - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Android Standing
Every ship should have a maintenance android for heavy lifting and fixing things in places where it is too dangerous for humanoids to go. In this product it is standing. The android comes in three more poses: working, seated and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also supportfree versions.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Maintenance android standing
Pump
Expand your Starship deck plans with this pump tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Pump (E)
Vacc Suits Traveller Miniature
A t-shirt and a pair of jeans won't get you far in space. A vacc suit is a better choice for space walks. In this package there are five different 28mm vacc suits: one space walking, one walking without the helmet, one in zero-g and two suits hanging, with and without a backpack. All in both supported and unsupported versions.
The vacc suits are sculpted by Kyoushuneko.
This package includes:
- Vacc Suit - Hanging - 28mm - Presupported.stl
Vacc Suit - Hanging - 28mm.stl
Vacc Suit - Hanging - Backpack - 28mm - Presupported.stl
Vacc Suit - Hanging - Backpack - 28mm.stl
Vacc Suit - Space Walk - 28mm - Presupported.stl
Vacc Suit - Space Walk - 28mm.stl
Vacc Suit - Space Walk - No Helmet - 28mm - Presupported.stl
Vacc Suit - Space Walk - No Helmet - 28mm.stl
Vacc Suit - Zero G - 28mm Presupported.stl
Vacc Suit - Zero G - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Android Working
Every ship should have a maintenance android for heavy lifting and fixing things in places where it is too dangerous for humanoids to go. In this product it is working. The android comes in three more poses: standing, seated and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also supportfree versions.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Maintenance android working
Security Set
Version: 1.1 - new version of the Security Scanner
Add security stations, brigs and prison cells to your starship deck plans!
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2018 Starship II Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 18 high detail tiles, including:
- Size E and size I floor turrets, articulated
- II Weapons lockers
- Cell doors
- Security doorway
- Laser door
- Security scanner
- Security control panel
Hiver in Zero-G Traveller Miniature
Hivers are a technology advanced six limbed species in the Traveller universe. These nest building beings are peaceloving and altruistic. They are very curious and exploring is a central trait. The Hiver society have made it their goal to elevate life and they think that one way of doing that is to work against nationalism and speciesism in other cultures.
In this package the hiver is in zero-g. There are four more hivers in different poses: Hiver Standing, Hiver in Action (A), Hiver in Action (B) and Hiver Relaxing. These five miniatures also come in a package: Hiver All Poses.
The figure is sculpted by That Blasted Samoplange.
This package includes:
- Hiver_zero_G.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Android Pack
Every ship should have a maintenance android for heavy lifting and fixing things in places where it is too dangerous for humanoids to go. Sleipnir's android comes in four different poses: working, standing, seated and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also supportfree versions.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Maintenance android working
- Maintenance android standing
- Maintenance android seated
- maintenance android zero-g
Cabin Collection Pack
Expand your Starship deck plans with these cabin collection pack tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wide Bunk Cabin (3x2)
- Narrow Bunk Cabin (2x3)
- Wide Double Cabin (3x2)
- Narrow Double Cabin (2x3)
- Wide Single Cabin (3x2)
- Narrow Single Cabin (2x3)
- Door
Hiver Standing - Traveller Miniature
Hivers are a technology advanced six limbed species in the Traveller universe. These nest building beings are peaceloving and altruistic. They are very curious and exploring is a central trait. The Hiver society have made it their goal to elevate life and they think that one way of doing that is to work against nationalism and speciesism in other cultures.
In this package the hiver is standing. There are four more hivers in different poses: Hiver Relaxing, Hiver in Action (A), Hiver in Action (B) and Hiver in Zero-G. These five miniatures also come in a package: Hiver All Poses.
The figure is sculpted by That Blasted Samoplange.
This package includes:
- Hiver_Standing1.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Kaylee Zero-G
A big starship requires a lot of maintenance and Sleipnir is no exception. Luckily engineer Kaylee is here to save the day when needed. In this product she is in zero-g. Kaylee comes in three more poses: standing, seated and action.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided both presupported and supportfree in 32mm and 28mm scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kaylee zero-g
Bridge Chairs
Expand your Starship deck plans with these bridge chairs, based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Captain's Chair
- Unbased Captain's Chair
- Based Chair (I, Type 6)
- Unbased Chair (Type 2)
- Based Chair (I, Type 1)
- Unbased chair (Type 1)
Hiver Relaxing - Traveller Miniature
Hivers are a technology advanced six limbed species in the Traveller universe. These nest building beings are peaceloving and altruistic. They are very curious and exploring is a central trait. The Hiver society have made it their goal to elevate life and they think that one way of doing that is to work against nationalism and speciesism in other cultures.
In this package the hiver is relaxing. There are four more hivers in different poses: Hiver Standing, Hiver in Action (A), Hiver in Action (B) and Hiver in Zero-G. These five miniatures also come in a package: Hiver All Poses.
The figure is sculpted by That Blasted Samoplange.
This package includes:
- Hiver_Relaxed.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Kaylee Action
A big starship requires a lot of maintenance and Sleipnir is no exception. Luckily engineer Kaylee is here to save the day when needed. In this product she is in an action pose. Kaylee comes in three more poses: standing, seated and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided both presupported and supportfree in 32mm and 28mm scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kaylee action
Steampunk Controls
Expand your Starship deck plans with these steampunk control tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Steampunk Control (S)
- Unbased Steampunk Control (S)
- Based Steampunk Control (I)
- Unbased Steampunk Control (I)
Hiver in Action A - Traveller Miniature
Hivers are a technology advanced six limbed species in the Traveller universe. These nest building beings are peaceloving and altruistic. They are very curious and exploring is a central trait. The Hiver society have made it their goal to elevate life and they think that one way of doing that is to work against nationalism and speciesism in other cultures.
In this package the hiver is action (A). There are four more hivers in different poses: Hiver Standing, Hiver Relaxing, Hiver in Action (B) and Hiver in Zero-G. These five miniatures also come in a package: Hiver All Poses.
The figure is sculpted by That Blasted Samoplange.
This package includes:
- Hiver_action_pose1.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Kaylee Seated
A big starship requires a lot of maintenance and Sleipnir is no exception. Luckily engineer Kaylee is here to save the day when needed. In this product she is seated. Kaylee comes in three more poses: standing, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided both presupported and supportfree in 32mm and 28mm scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kaylee seated
Cryo Chambers
Expand your Starship deck plans with these cryo chamber tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Cryo Chamber, vertical
- Unbased Cryo Chamber, vertical
- Based Cryo Chamber, horisontal
- Unbased Cryo Chamber, horisontal
- Base (I)
- Base (S)
Hiver in Action B - Traveller Miniature
Hivers are a technology advanced six limbed species in the Traveller universe. These nest building beings are peaceloving and altruistic. They are very curious and exploring is a central trait. The Hiver society have made it their goal to elevate life and they think that one way of doing that is to work against nationalism and speciesism in other cultures.
In this package the hiver is action (B). There are four more hivers in different poses: Hiver Standing, Hiver in Action (A), Hiver Relaxing and Hiver in Zero-G. These five miniatures also come in a package: Hiver All Poses.
The figure is sculpted by That Blasted Samoplange.
This package includes:
- Hiver_action_pose2.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Kaylee Standing
A big starship requires a lot of maintenance and Sleipnir is no exception. Luckily engineer Kaylee is here to save the day when needed. In this product she is standing. Kaylee comes in three more poses: seated, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided both presupported and supportfree in 32mm and 28mm scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kaylee standing
Cargo Lift
Expand your Starship deck plans with these cargo lift tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Starship Cargo Lift Frame (EA)
- Starship Cargo Lift
- Cargo Lift Door
Hiver - All Poses Traveller Poses
Hivers are a technology advanced six limbed species in the Traveller universe. These nest building beings are peaceloving and altruistic. They are very curious and exploring is a central trait. The Hiver society have made it their goal to elevate life and they think that one way of doing that is to work against nationalism and speciesism in other cultures.
In this package the hivers are standing, relaxing, in action (two different poses) and in zero-g.
The figures are sculpted by That Blasted Samoplange.
This package includes:
- Hiver_action_pose1.stl
Hiver_action_pose2.stl
Hiver_Relaxed.stl
Hiver_Standing1.stl
Hiver_zero_G.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Kaylee Pack
A big starship requires a lot of maintenance and Sleipnir is no exception. Luckily engineer Kaylee is here to save the day when needed. Kaylee comes in four different poses: standing, seated, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided both presupported and supportfree in 32mm and 28mm scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kaylee standing
- Kaylee seated
- Kaylee action
- Kaylee zero-g
Holographic Table
Expand your Starship deck plans with this holographic table, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Starship Holographic Table (E)
- Unbased Starship Holographic Table
Vargr Bandits - Traveller Miniatures
The vargrs are a dogish race with a humanoid look that inhabits the Traveller universe. This package includes eight different vargr bandits in action poses.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Alt - Gunner.stl
Vargr Bandit - Alt - Heavy.stl
Vargr Bandit - Alt - Sword and Pistol 1.1.stl
Vargr Bandit - Alt - Twin Pistols.stl
Vargr Bandit - Gunner.stl
Vargr Bandit - Heavy.stl
Vargr Bandit - Sword and Pistol.stl
Vargr Bandit - Twin Pistols.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Marine Zero-G
Friend or foe? This combat marine will be whatever your tabletop RPG och Wargame needs them to be. In this product the marine is in zero-g. It comes in two more poses: action and T-pose.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels for the making of the 3d printable spaceship Sleipnir, please read more below.
The marine is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes the marine in:
- Zero-G
Power Loader
Expand your Starship deck plans with this power loader tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Power Loader
Grant Cab Module
An alternative cab for our Official Traveller. Originally offered as a social stretch goal from our Small Craft Kickstarter, the Grant Cab is based on an old school Traveller design and features an elongated nose, Beowulf-like bow, RCS clusters, forward stabilisers, and internally, makes the cab into a suitable environment for long hauls.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Vargr Soldiers Traveller Miniatures
The vargrs are a dogish race with a humanoid look that inhabits the Traveller universe. In this package there is twelve soldiers.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Alt - Granadier.stl
Vargr Soldier - Alt - Riot Shield and Baton.stl
Vargr Soldier - Alt - Riot Shield and Pistol.stl
Vargr Soldier - Alt - SMG.stl
Vargr Soldier - Alt - Sniper Aiming.stl
Vargr Soldier - Alt - Sniper.stl
Vargr Soldier - Grenadier.stl
Vargr Soldier - Riot Shield and Baton.stl
Vargr Soldier - Riot Shield and Pistol.stl
Vargr Soldier - SMG.stl
Vargr Soldier - Sniper Aiming.stl
Vargr Soldier - Sniper.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Marine T-pose
Friend or foe? This combat marine will be whatever your tabletop RPG och Wargame needs them to be. In this product the marine is in a T-pose. It comes in two more poses: action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels for the making of the 3d printable spaceship Sleipnir, please read more below.
The marine is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes the marine in a:
- T-pose
Starship Ramps
Expand your Starship deck plans with these stackable ramp tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Ramp (A)
- Ramp Base, three quarter (A)
- Ramp Base, half (A)
- Ramp Base, quarter (A)
- Ramp (S)
- Ramp Base, three quarter (S)
- Ramp Base, half (S)
- Ramp Base, quarter (S)
Vargr Soldier - SMG
The vargrs are a dogish race with a humanoid look that in inhabits the Traveller universe. In this package there is a vargr soldier with a submachine gun, SMG, who has a face much like a german shepherd. We also have a alternative package where the vargr soldier with the SMG resembles a labrador.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Grenadier, Grenadier Alt, Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Sniper, Vargr Soldier Sniper Alt, Vargr Soldier - Aiming and Vargr Soldier - Aiming Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - SMG.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Marine Action
Friend or foe? This combat marine will be whatever your tabletop RPG och Wargame needs them to be. In this product the marine is in an action pose. It comes in two more poses: T-pose and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels for the making of the 3d printable spaceship Sleipnir, please read more below.
The marine is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes the marine in:
- Action
Airlock Expansion
Expand your Starship deck plans with these airlock expansion tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Airlock (E)
- Airlock (A)
- Airlock (IA)
- AirlocK Door (A)
- Airlock Door (IA)
Vargr Soldier - Aiming Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the aiming soldier has a labradorish face. We also have a alternative package where the vargr soldier aiming resembles a german shepherd.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Sniper, Vargr Soldier Sniper Alt, Vargr Soldier Grenadier, Grenadier Alt, Vargr Soldier - SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Alt - Sniper Aiming.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Marine Pack
Friend or foe? This combat marine will be whatever your tabletop RPG och Wargame needs them to be. The marine comes in three different poses: action, T-pose, and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels for the making of the 3d printable spaceship Sleipnir, please read more below.
The marine is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes the marine in three poses:
- Action
- T-pose
- Zero-g
Machinery Expansion
Create your own starship deckplans with these tiles! Allows the construction of machinery perfect for an engineering section, computer server room or the like.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter tiles.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing package.
This package includes:
- 2×1 Server (S)
- 2×1 Power Generator (S)
- 2×1 Shield Generator (S)
- 2×1 Thuster/Engine (S)
- 2×1 Thurster/Engine Wall (I+IA)
- A basic print & paint guide
Vargr Soldier - Sniper Traveller Miniature
The vargrs are a dogish race, with some humanoid features, that inhabits the Traveller universe. In this package the sniper soldier has a face much like a german shepherd. We also have a alternative package where the vargr sniper soldier resembles a labrador.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Grenadier, Grenadier Alt, Vargr Soldier - SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Sniper.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stowaway Jenylin Zero-G
Holed up in a sealed cargo crate in Sleipnirs cargo bay there is a stowaway. Jenylin is armed, desperate, and running out of rations. In this product she is in zero-g.
Jenylin comes in four more poses: stowaway, standing, seated and action.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Jenylin Zero-G
Door Expansion
Expand your Starship deck plans with these doorway pieces, including two door types, and three door frames, suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2017 Starship Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 3× Wide Doorway wall (DS)
- 3× Wide Single Door and Wall (DS)
- 1× Narrow doorway wall (IA)
- 1× Wide door
- 1× Narrow door (fits IA)
- A basic print & paint guide
Vargr Soldier - Shield & Bat Traveller Miniature
The vargrs are a dogish race, with some humanoid features, that inhabits the Traveller universe. In this package the soldier with a shield and a bat has a face much like a german shepherd. We also have a alternative package where the vargr soldier with a shield and a bat resembles a labrador.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Vargr Soldier - Grenadier, Grenadier Alt, Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier - SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Riot Shield and Baton.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stowaway Jenylin Action
Holed up in a sealed cargo crate in Sleipnirs cargo bay there is a stowaway. Jenylin is armed, desperate, and running out of rations. In this product she is in an action pose.
Jenylin comes in four more poses: stowaway, standing, seated and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Jenylin Action
Science & Medical Pack
Fully realise a medical bay or science lab aboard your vessel, space station or colony. Includes medical beds, scanners, sample storage and body scanners for diagnosing that alien parasite or collecting samples of alien flora and fauna.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2018 Starship II Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 18 high detail tiles, including:
- S and A Sample Wall storage
- S-Wall and regular wall medical operating tables
- S Specimen Tables
- Standalone large and small specemin containers
- Body scanner
- Sample Tables
Vargr Soldier - Shield & Gun Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the soldier with a shield and a gun has a labradorish face. We also have a alternative package where the vargr soldier grenadier resembles a german shepherd.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Vargr Soldier - Grenadier, Grenadier Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier - SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Alt - Riot Shield and Pistol.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stowaway Jenylin Seated
Holed up in a sealed cargo crate in Sleipnirs cargo bay there is a stowaway. Jenylin is armed, desperate, and running out of rations. In this product she is seated.
Jenylin comes in four more poses: stowaway, standing, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Jenylin Seated
- Crash Couch
- Crash Couch - screen
Bridge Tiles
Expand your Starship deck plans with this bridge tile set! Allows the construction of starship or other sci-fi control panels and bridge seating. Includes seven control panels, three seat variants (based and unbased), and a doorway, suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2017 Starship Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns (100 or less recommended for detail pieces) using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1×1 Vertical rear control panel floor tile (I)
- 1×1 Angled rear control panel floor tile (I)
- 1×1 Lower rear control panel floor tile (I)
- Top rear control panel
- 1×1 Bridge doorway (IA)
- Bridge Door
- 1×1 Navigation control panel (I)
- 1×1 Pilot control panel (I)
- 1×1 Helm control panel (I)
- 1×1 Standing control panel (I)
- 1×1 Bridge chair type 1 (I)
- 1×1 Bridge chair type 2 (I)
- 1×1 Bridge chair type 3 (I)
- 1×1 Bridge chair base (I)
- Bridge chair type 1
- Bridge chair type 2
- Bridge chair type 3
- A basic print & paint guide
Vargr Soldier - Grenadier - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the grenadier soldier has a labradorish face. We also have a alternative package where the vargr soldier grenadier resembles a german shepherd.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier - SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Grenadier.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stowaway Jenylin Standing
Holed up in a sealed cargo crate in Sleipnirs cargo bay there is a stowaway. Jenylin is armed, desperate, and running out of rations. In this product she is standing.
Jenylin comes in four more poses: stowaway, seated, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Jenylin Standing
Base Tiles
Create your own starship deckplans with these base tiles! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions, including two wall types and three floor tiles suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2017 Starship Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 2×2 base floor tile (E)
- 2×1 base floor tile (S)
- 1×1 base floor tile (I)
- 1× base wall (IA)
- 2× base wall (A)
- Low detail versions of the tiles
- A basic print & paint guide
Vargr Bandit - Twin Guns - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit with twin guns has a face much like a german shepherd. We also have a alternative package where the vargr with twin guns resembles a labrador.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner A, Vargr Bandit - Gunner A - Alt, Vargr Bandit - Gunner B, Vargr Bandit - Gunner B - Alt, Vargr Bandit - Sword and Gun and Vargr Bandit - Sword and Gun - Alt.
All vargr bandits also come as a Vargr Bandits package and are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Twin Pistols.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stowaway
Holed up in a sealed cargo crate in Sleipnirs cargo bay there is a stowaway. Jenylin is armed, desperate, and running out of rations. In this product she is in a stowaway pose.
Jenylin comes in four more poses: standing, seated, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Stowaway, Jenylin
Corridor Tile Set
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. Includes high and low detail versions, two wall variants, a doorway, single and double tile variants, including intersections.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2017 Starship Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 28 tiles, including:
- 2×2 corridor floor tile (E)
- 2×2 T-Intersection floor tile (E)
- 2×2 + Intersection floor tile (E)
- 2×2 Corner floor tile (E)
- 2×1 narrow corridor floor tile (S)
- 2×1 wide corridor floor tile (S)
- 1×1 corridor floor tile (I)
- 1×1 T-Intersection floor tile (I)
- 1×1 + Intersection floor tile (I)
- 1×1 Corner floor tile (I)
- 1× Corridor wall (IA)
- 2× Corridor wall (A)
- 2× Corridor doorway (AS)
- Door
- High Detail versions of all of the above
- A basic print & paint guide
Winglets - Type S Scout/Courier Upgrade
Change the look of your Type S Scout/Courier by adding wing pieces. The Winglets will work with the 28mm Type J Seeker too.
The Type S Scout/Courier is a spaceship that travels the Traveller Tabletop Universe. It is a fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display.
The Type S Scout/Courier is detailed inside and out and we also offer a variety of configurations to the ship. Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
This package includes four 28mm winglet STL Files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stowaway Jenylin Pack
Holed up in a sealed cargo crate in Sleipnirs cargo bay there is a stowaway. Jenylin is armed, desperate, and running out of rations. Jenylin comes in five different poses: stowaway, standing, seated, action and zero-g.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also a supportfree version in 32mm which is easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes Jenylin:
- in a stowaway pose, standing, seated, action and zero-g
Staircases
Expand your Starship deck plans with these staircase tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Staircase (E)
- Staircase (S)
- Staircase (I)
Chimera Hull Extenders Expansion Kit
With the hull extenders you will be able to widen the middle of the Chimera or join two separate Chimera hulls together.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the Chimera VTOL Engines Expansion Kit there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
Sleipnir Crew Daz Zero-G
Daz is the pilot of the Sleipnir-class starship we have created. In this product he is in zero-g pose, but he is also available in three more poses: standing, seated and in action. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Günther (the Engineer). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
Daz Zero-G, both presupported and support-free
Ladders
Expand your Starship deck plans with these ladder tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Corridor Ladder Well (E)
- Base Ladder Well (E)
- Engineering Ladder Well (E)
- Ladder - Wall (IA)
- Ladder - Flat
- Ladder - Well Base
Vargr Bandit - Sword and Gun
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit with a sword and a gun has a labradorish face. We also have a alternative package where the vargr bandit with a sword and a gun resembles a german shepherd.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner A, Vargr Bandit - Gunner A - Alt, Vargr Bandit - Gunner B, Vargr Bandit - Gunner B - Alt, Vargr Bandit - Twin Guns and Vargr Bandit - Twin Guns - Alt.
All vargr bandits also come as a Vargr Bandits package and are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Alt - Sword and Pistol 1.1.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Daz Action
Daz is the pilot of the Sleipnir-class starship we have created. In this product he is in an action pose, but he is also available in three more poses: standing, seated and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Günther (the Engineer). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Daz Action, both presupported and support-free
Lift
Expand your Starship deck plans with these lift tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- E-Lift Housing
- Lift
- Lift Door
Vargr Bandit - Gunner A - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit gunner A has a labradorish face. We also have a alternative package where the vargr bandit gunner A resembles a german shepherd.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner B, Vargr Bandit - Gunner B - Alt, Vargr Bandit - Sword and Gun, Vargr Bandit - Sword and Gun - Alt, Vargr Bandit - Twin Guns and Vargr Bandit - Twin Guns - Alt.
All vargr bandits also come as a Vargr Bandits package and are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Alt - Heavy.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Daz Seated
Daz is the pilot of the Sleipnir-class starship we have created. In this product he is seated, but he is also available in three more poses: standing, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Günther (the Engineer). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Daz Seated, both presupported and support-free
- Crash Couch
- Crash Couch - Screen
Control Panels
Expand your Starship deck plans with these control panels, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Control Panel (I)
- Unbased Control Panel
- Based Machinery Panel (S)
Vargr Bandit - Gunner B - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit gunner B has a face much like a german shepherd. We also have a alternative package where the vargr bandit gunner B resembles a labrador.
There are three more bandits in different poses equipped with variuos weapons: Vargr Bandit - Gunner A, Vargr Bandit - Gunner A - Alt, Vargr Bandit - Sword and Gun, Vargr Bandit - Sword and Gun - Alt, Vargr Bandit - Twin Guns and Vargr Bandit - Twin Guns - Alt.
All vargr bandits also come as a Vargr Bandits package and are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Gunner.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Daz Standing
Daz is the pilot of the Sleipnir-class starship we have created. In this product he is standing, but he is also available in three more poses: seated, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Günther (the Engineer). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Daz Standing, both presupported and support-free
Microfighter
Expand your Starship deck plans with this microfighter tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Starship Microfighter
Vargr Wolf Pack Traveller Miniature
The vargrs are a dogish race with a humanoid look that inhabits the Traveller universe. In this package there are both soldiers and bandits in different action poses and carrying various weapons.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes twenty stl-files:
- Vargr Bandit - Alt - Gunner.stl
Vargr Bandit - Alt - Heavy.stl
Vargr Bandit - Alt - Sword and Pistol 1.1.stl
Vargr Bandit - Alt - Twin Pistols.stl
Vargr Bandit - Gunner.stl
Vargr Bandit - Heavy.stl
Vargr Bandit - Sword and Pistol.stl
Vargr Bandit - Twin Pistols.stl
Vargr Soldier - Alt - Granadier.stl
Vargr Soldier - Alt - Riot Shield and Pistol.stl
Vargr Soldier - Alt - SMG.stl
Vargr Soldier - Alt - Sniper Aiming.stl
Vargr Soldier - Alt - Sniper.stl
Vargr Soldier - Grenadier.stl
Vargr Soldier - Riot Shield and Baton.stl
Vargr Soldier - Riot Shield and Pistol.stl
Vargr Soldier - SMG.stl
Vargr Soldier - Sniper Aiming.stl
Vargr Soldier - Sniper.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Günther Zero-G
Günther is the engineer of the Sleipnir-class starship we have created. In this product he is in zero-g, but he is also available in three more poses: standing, seated and action. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
Günther Zero-G, both presupported and support-free
Prison Cell Pack
Expand your Starship deck plans with these prison cell pack tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Doorway (IA)
- Cell Door A
- Cell Door B
- Wide Door (DS)
- Laser grid (DS)
- Wall Cell Toilet And Padding (S)
- Wall cell Padding (S)
- Wall Cell Corner (S)
- Wall Cell Padding End (S)
- Wall Cell Single Padding (S)
- Half Wall Cell Toilet And Padding (S)
- Half Wall cell Padding (S)
- Half Wall Cell Corner (S)
- Half Wall Cell Padding End (S)
- Half Wall Cell Single Padding (S)
Murphy Bed
This murphy bed can be folded into the wall where it is replaced by a folding desk and computer terminal.
28mm scale (1:59), with a variant that will fit in a standard Traveller state room.
Sleipnir Crew Günther Action
Günther is the engineer of the Sleipnir-class starship we have created. In this product he is in an action pose, but he is also available in three more poses: standing, seated and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Günther Action, both presupported and support-free
Scout Ship Beta
Version: 1.3.4
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
- The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
- Modular interior – customise the layout however you like using other Starship or compatible tiles
- The scout ship has moderately sized parts, with options for large prints to print with less parts
- Contains over 80 parts
- Largest part is 129×125×97mm (5×5×3.8")
- There are some additional margins if parts are rotated, etc.
You can also modifiy your Scout Ship with eight different variants: Airlock, Cargo, Civilian, Gunboat, Missile, Patrol, Stretch and Hammerhead.
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Modular Shipping Containers
Hi 2nd Dynasty supporters!
We’re Andy & Gem, and we create grimdark miniatures every month over on our Patreon and Tribe. As a gift to you this month, we’re sharing our Modular Shipping Container Kit so you can build various industrial containers for your tabletop, following our included Build Guide.
A bit about us…
Our models inhabit the industrial world of Mortuus Secunda, which is filled with soaring hab cities, endless deserts and terrifying beasts. Gang warfare rules the streets and manufacturing drives the economy.
Each month we add more miniatures to our different factions - the Kaledon Fortis army, the Erroish nomads of the Brinkland desert, the Bitter Nightshades all-female gang, the Watch Enforcers, and many other rogue characters just trying to make their fortune!
We also continue to develop our line of Shipping Container Kits, seeing establishments like the Rot Water Bar and the Medicant Station bring the city to life, and mighty vehicles like the Colossus Line Breaker traverse the harsh native landscapes. We continually add upgrades and expansions to these popular kits (some of which you’ll find in our Welcome Pack).
Join our community by following any of the links below and get involved in the story each month!
Links…
Patreon: https://www.patreon.com/printminis
Store: https://www.myminifactory.com/users/PrintMinis?show=store
Discord: https://discord.gg/RDfH2nnz49
We currently have a 40% sale on our store as part of MMF’s Winter Sale (Expires Jan 2023). Use code: PRINTMINIS40
Thank you so much!
Sleipnir Crew Günther Seated
Günther is the engineer of the Sleipnir-class starship we have created. In this product he is seated, but he is also available in three more poses: standing, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Günther Seated, both presupported and support-free
- Crash Couch
- Crash Couch - Screen
Transport Delta 1700-Series
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Wow your players with this awesome 28mm-scale freighter starship perfect for your rag-tag team of rebel fighters in a galaxy far, far away, a crew of starfinders, or as an incredible set piece for that Legion, Shatterpoint, or Stargrave game. Cruise the hyperspace lanes, haul cargo - legitimate or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Detailed inside and out, the Delta 1700-Series has a single storey deck plan with a cockpit, living area, generous cargo bay, engineering section and of course, hidden underfloor cargo compartments. It's armed with a double-barreled turret, powerful shield generator, and has an articulated ramp and two airlocks for entry.
2023 UPDATE!!!
Our brand new 2023 overhaul of the Transport Delta is called the 1700-series and replaces 95% of the original Transport Delta parts from 2019 with modernised parts suitable for modern FDM printing. Almost every single part has been remodelled, optimised and increased in detail.
- Highly Detailed - Over 130 unique parts
- Print Friendly - Almost zero supports required, and comes with eight 3mf build plates for fast and easy printing, get started in minutes!
- Rescalable - Easily rescaled to 30 mm, 32 mm, 35mm, or larger
- Modular Interior – Customise the layout however you like using other OpenLOCK tiles from 2nd Dynasty or other designers
- Glueless Assembly - Assembles using the OpenLOCK clip system and its variants. Clips included.
- Lighting Ready - The engines are designed to easily fit 5mm LED flat lights.
- Fully Illustrated Assembly Manual - Includes a PDF with extensive descriptions of assembly
You can also modify your Transport Delta with seven different variants: Asymmetric, Big Gun, Gunship, Saucer, Upper Cockpit, Upper Deck and Long Transport.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Firefly 28mm Starfighter
Latest Version: 1.0.3 - Thanks to Daemonara for the resin presets
The Hades Aerospace ASF-09 Firefly is a 28mm scale light starfighter is armed with twin gatling cannons and hard points for future expansions. It features variable wings and tail fin for easy stowage on a carrier and optimal flight characteristics for in-atmosphere sorties as well as space combat.
Features RCS thrusters and 3D vectored main engines that make course corrections incredibly responsive and in-atmosphere manoeuvrability unparalleled.
The Firefly is an evolution of a design I made way back in 2006. It originally featured in a roleplaying supplement for D20 Future published under UKG Publishing.
The firefly is compatible with our seated 28mm miniatures. Its armaments are compatible with many items from the Starfighter packs.
This starfighter design was created for our Tribes in December 2022, and features in Operation Maelstrom
Sleipnir Crew Günther Standing
Günther is the engineer of the Sleipnir-class starship we have created. In this product he is standing, but he is also available in three more poses: seated, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Günther Standing, both presupported and support-free
Spacesuit Pack
This collection of spacesuit miniatures were sculpted by Anton Moskvichev for the Starship II Kickstarter. Designed for 25-32mm play, and come in three poses, including standing, walking with magnetic boots, and a space walk pose.
28mm Scout-Style Turret
This is a "Type S Scout" variant of the Beowulf Turret Chassis, including the barrel configuration with a Beam Laser, Sandcaster and Missile Launcher in one (triple turret).
This is compatible with all our other turret ports on starships, including our 28mm Traveller starships.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Katarzyna Zero-G
Katazyna is the medic of the Sleipnir-class starship we have created. In this product he is in zero-g, but he is also available in three more poses: standing, seated and action. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Katarzyna Zero-G, both presupported and support-free
Hangar Set (Starship II - OpenLOCK)
Currently Available for Free by joining our Tribe.
From a small shuttle bay to a full scale star carrier, the hangar set lets you create modular internal docking bays. With crawlspace access, airlock doorways, and both full walls and half walls, you can create a hangar scene for practical play or a full diorama.
- Includes full walls and half walls
- Modular hangar door, can be assembled horizontal or vertical
- Marked areas and tie down floors to secure craft
- Crawlspace access and ventilation
- Contains almost 60 pieces
28mm Beowulf Turret Pack
This Official Traveller turret pack contains 19 turret weapon variants and two turret chassis', including the Free Trader Beowulf default twin beam lasers and a Beowulf influenced version of the Type S turret.
Turret Mount Variants:
- Scout-Style Turret Chassis
- Beowulf-Style Turret Chassis
Weapon Variants:
- Single, Double, Triple and Quad Beam Laser
- Single, Double, Triple and Quad Pulse Laser
- Single, Double, Triple and Quad Missile Launcher
- Single, Double, Triple and Quad Sandcaster
- Type S Style Beam Laser, Sandcaster, Missile Launcher
- Pulse Laser, Sandcaster, and Missile Launcher
- Pulse Laser and Missile Launcher
- Double Pulse Laser and Sandcaster
Each turret uses our standard turret port, and is compatible with the following ships and variants:
- Type A Free Trader "Beowulf"
- Type S Scout/Courier
- Type J Seeker
- Beta Centauri
- Scout Ship Beta
- Transport Delta
- Shuttle Alpha Turret Variants
- Chimera Turret Variants
- Chimera Pathfinder
- Chimera Cerberus
- Sleipnir Turret Variants
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Katarzyna Action
Katazyna is the medic of the Sleipnir-class starship we have created. In this product they are in an action pose, but they are also available in three more poses: standing, seated and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Katarzyna Action, both presupported and support-free
Corridors II Set (Starship II - OpenLOCK)
These wide corridors create a beautiful sci-fi aesthetic while providing more room for play. Half wall variants included for practical play areas and full walls for full dioramas. Crawlspace entrances and doorways included to create more access points.
- Both full walls for dioramas and x-ray half walls for practical play
- Three doorway variants
- Crawlspace entrances and vents
- Includes 37 high detail tiles
Stairs
Let these stairs take you seamlessly between floors in your starship, station or base. The tiles are compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Katarzyna Seated
Katazyna is the medic of the Sleipnir-class starship we have created. In this product he is seated, but he is also available in three more poses: standing, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Katarzyna Seated, both presupported and support-free
- Crash Couch
- Crash Couch - Screen
Engineering Bulkheads (Starship II - OpenLOCK)
Perfect for framing heavy machinery, these double wide walls provide an aesthetically pleasing environment with running pipes, crawlspace accesses, and fully detailed doorways. Make your engineering level come alive with practical half wall tiles for easy-to-see play or full diorama walls.
- X-ray half walls for practical play
- Full diorama detail walls
- Crawlspace access and vents
- Three doorway variants
- Doors and crawlspace irises
- Minimal to no supports required
- 29 high detail pieces
Elevators
Let these elevators take you seamlessly between floors in your starship, station or base. The tiles are compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Katarzyna Standing
Katarzyna is the medic of the Sleipnir-class starship we have created. In this product he is standing, but he is also available in three more poses: seated, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Lana (the Gunner), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Katarzyna Standing, both presupported and support-free
Crawlspace Set (Starship II - OpenLOCK)
Recreate the claustrophobia of your favourite sci-fi horror scenarios with these crawlspace tiles. Connects to the Corridor II, Engineering Bulkhead and Hangar tile sets, and includes flat tiles for practical movement or half walls to truly visualise tight, enclosed spaces.
- Includes flat tiles for practical play and walled tiles for dioramas
- Ladders for two-tiered play
- 29 tiles
Wall Converters
With these wall converters you can match the original Starship I and Starship II engineering and corridors to Starship: The Next Generation walls.
This package includes more than 25 STL files.
Sleipnir Crew Lana Zero-G
Lana is the gunner of the Sleipnir-class starship we have created. In this product she is in zero-g, but she is also available in three more poses: standing, seated and action. Check them out!
There are also four more crew members: Kimiko (the Commander), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana Zero-G, both presupported and support-free
Space Shuttle Alpha
Shuttle Alpha MKIIIB Upgrade now available!
Version: 3.0 - 11/11/2022
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
- Modular interior – customise the layout however you like using other Starship or compatible OpenLOCK tiles
- Highly detailed model
- Optimised for FDM printing
- Functional rear ramp and landing gear bay doors
- Lighting ready
- Contains over 50 pieces
- Prints almost completely support free
You can also modify your Space Shuttle Alpha with seven different variants: Bus, Missile, Twin Engine, Turret, Warp, Winged and Mobile Home.
Starship is a system of science fiction themed 3D printable tiles for creating detailed, modular spaceship deck plans for tabletop roleplaying and war gaming.
Starship tiles are produced by 2nd Dynasty using the OpenLOCK connector system. The tiles are scaled for 28 mm miniatures, but can easily be rescaled for a variety of scales for miniature wargaming and tabletop roleplay.
We recommend printing at 150 microns (0.15 mm) layer thickness for most larger parts, and 100 microns (0.1 mm) for detail pieces such as control panels. All models are optimised for printing with as few supports as necessary, and have been oriented for optimal printing. Base tiles have built in supports that require removal after printing to fit the clips.
Requires the OpenLOCK clip available free from Printable Scenery.
Inner Hull
With these inner hull tiles you can map out the interior hull for crawlspaces and hard to reach places. Compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
This package contains more than 50 STL files.
Sleipnir Crew Lana Action
Lana is the gunner of the Sleipnir-class starship we have created. In this product she is in an action pose, but she is also available in three more poses: standing, seated and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana Action, both presupported and support-free
Pipeless Walls
This package includes non-pipe top and bottom sections for engineering sections and conversion pieces to route piping. Compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
The package includes more than 60 STL files.
Sleipnir Crew Lana Seated
Lana is the gunner of the Sleipnir-class starship we have created. In this product she is seated, but she is also available in three more poses: standing, action and Zero-G. Check them out!
There are also four more crew members: Kimiko (the Commander), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana Seated, both presupported and support-free
- Crash Couch
- Crash Couch - Screen
Ladders and Hatches
The original ladderswells and hatches from Starship I have got a make over. Compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
This package includes more than 35 STL files.
Sleipnir Crew Lana Standing
Lana is the gunner of the Sleipnir-class starship we have created. In this product she is standing, but she is also available in three more poses: seated, action and zero-g. Check them out!
There are also four more crew members: Kimiko (the Commander), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana Standing, both presupported and support-free
Elevators and Stairs
Get seamlessly between floors with these elevator and stairs. The tiles are compatible with with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Kimiko Zero-G
Kimiko is the commander of the Sleipnir-class starship we have created. In this product she is in zero-g position, but she is also available in three more poses: standing, seated and action. Check them out!
There are also four more crew members: Lana (the Gunner), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kimiko Zero-G, both presupported and support-free
Diagonal Walls
These diagonal walls have angles that make sense for building corridors and all sort of mechanical or industrial components of a starship, station or base. Compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Kimiko Action
Kimiko is the commander of the Sleipnir-class starship we have created. In this product she is in an action pose, but she is also available in three more poses: standing, seated and Zero-G. Check them out!
There are also four more crew members: Lana (the Gunner), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kimiko Action, both presupported and support-free
Curved Walls
These curved walls for engineering and corridors are compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Kimiko Seated
Kimiko is the commander of the Sleipnir-class starship we have created. In this product she is seated, but she is also available in three more poses: standing, action and zero-g. Check them out!
There are also four more crew members: Lana (the Gunner), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kimiko Seated, both presupported and support-free
- Crash Couch
- Crash Couch - Screen
Door Variants
This package includes three and four inch doorways for corridors and engineering wall tiles. Compatible with Starship: The Next Generation, our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Kimiko Standing
Kimiko is the commander of the Sleipnir-class starship we have created. In this product she is standing, but she is also available in three more poses: seated, action and zero-g. Check them out!
There are also four more crew members: Lana (the Gunner), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kimiko Standing, both presupported and support-free
Wide Floor Engineering
Widen your engineering passages and corridors from Starship: The Next Generation with these wide floor engineering tiles. Starship: the Next Generation is our redesigned and greatly improved take on our original science fiction Openlock corridor and engineering tile sets from Starship I.
Sleipnir Crew Daz Pack
Daz is the pilot of the Sleipnir-class starship we have created. He comes in four different poses: standing, seated, action and Zero-G.
There are four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Günther (the Engineer). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Daz in four positions: standing, seated, action and zero-g, all in pre-supported and support free versions
- Crash Couch
- Crash Couch - Screen
Calvin Zero-G Scout Crew Miniature
This is Calvin, one of the Scout crew members. In this package he is in zero-g.
The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Doc. Check them out!
The figures are sculpted by Kyoushuneko Miniatures.
This package includes:
- Calvin - Zero-G - 28mm - Presupported.stl
- Calvin - Zero-G - 28mm.stl
Sleipnir Crew Günther Pack
Günther is the engineer of the Sleipnir-class starship we have created. He comes in four different poses: standing, seated, action and Zero-G.
There are four more crew members: Kimiko (the Commander), Lana (the Gunner), Katarzyna (the Medic) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Günther in four positions: standing, seated, action and zero-g, all in pre-supported and support free versions
- Crash Couch
- Crash Couch - Screen
Calvin Lying Down Scout Crew Miniature
This is Calvin, one of the Scout crew members. In this package he is lying down.
The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Doc. Check them out!
The figures are sculpted by Kyoushuneko Miniatures.
This package includes:
- Calvin - Relaxed - 28mm - Presupported.stl
- Calvin - Relaxed - 28mm.stl
Sleipnir Crew Katarzyna Pack
Katarzyna is the medic of the Sleipnir-class starship we have created. He comes in four different poses: standing, seated, action and Zero-G.
There are four more crew members: Kimiko (the Commander), Lana (the Gunner), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Katarzyna in four positions: standing, seated, action and zero-g, all in pre-supported and support free versions
- Crash Couch
- Crash Couch - Screen
Calvin in Action Scout Crew Miniature
This is Calvin, one of the Scout crew members. In this package he is in action.
The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Doc. Check them out!
The figures are sculpted by Kyoushuneko Miniatures.
This package includes:
- Calvin - Action - 28mm - Presupported.stl
- Calvin - Action - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Lana Pack
Lana is the gunner of the Sleipnir-class starship we have created. She comes in four different poses: standing, seated, action and Zero-G.
There are four more crew members: Kimiko (the Commander), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana in four positions: standing, seated, action and zero-g, all in pre-supported and support free versions
- Crash Couch
- Crash Couch - Screen
Calvin Seated Scout Crew Miniature
This is Calvin, one of the Scout crew members. In this package he is seated.
The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Doc. Check them out!
The figures are sculpted by Kyoushuneko Miniatures.
This package includes:
- Calvin - Seated - 28mm - Presupported.stl
- Calvin - Seated - 28mm.stl
Sleipnir Crew Kimiko Pack
Kimiko is the commander of the Sleipnir-class starship we have created. She comes in four different poses: standing, seated, action and Zero-G.
There are four more crew members: Lana (the Gunner), Katarzyna (the Medic), Günther (the Engineer) and Daz (the Pilot). Together they represent a mishmash of Terrans, Martians and Spacers.
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels. They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Kimiko in four positions: standing, seated, action and zero-g, all in pre-supported and support free versions
- Crash Couch
- Crash Couch - Screen
Calvin Standing Scout Crew Miniature
This is Calvin, one of the Scout crew members. In this package he is standing.
The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Doc. Check them out!
The figures are sculpted by Kyoushuneko Miniatures.
This package includes:
- Calvin - Standing - 28mm - Presupported.stl
- Calvin - Standing - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Zero-G Pack
To operate the Sleipnir-class we have created a rag-tag crew of five: Lana (the Gunner), Katarzyna (the Medic), Kimiko (the Commander), Günther (the Engineer) and Daz (the Pilot) representing a mishmash of Terrans, Martians and Spacers. In this package they are in zero-g position. Five minis in total. The crew also come in standing, action and seated poses. Check them out!
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels.They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana, Kimiko, Günther, Katarzyna and Daz in zero-g positions, both presupported and support-free
Calvin: All Poses Scout Crew Miniature
This is Calvin, one of the Scout crew members. The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Doc. Check them out!
The figures are sculpted by Kyoushuneko Miniatures.
This package includes:
- Calvin - Standing - 28mm - Presupported.stl
- Calvin - Standing - 28mm.stl
- Calvin - Seated - 28mm - Presupported.stl
- Calvin - Seated - 28mm.stl
- Calvin - Action - 28mm - Presupported.stl
- Calvin - Action - 28mm.stl
- Calvin - Relaxed - 28mm - Presupported.stl
- Calvin - Relaxed - 28mm.stl
- Calvin - Zero-G - 28mm - Presupported.stl
- Calvin - Zero-G - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Seated Pack
To operate the Sleipnir-class we have created a rag-tag crew of five: Lana (the Gunner), Katarzyna (the Medic), Kimiko (the Commander), Günther (the Engineer) and Daz (the Pilot) representing a mishmash of Terrans, Martians and Spacers. In this package they are in seated position. Five minis in total. The crew also come in standing, action and zero-g poses. Check them out!
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels.They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana, Kimiko, Günther, Katarzyna and Daz in seated positions, both presupported and support-free
- Crash Couch
- Crash Couch - Screen
Aslan Male Traveller Miniatures
This is a male Aslan, a bipedal carnivore inhabitan of the Traveller universe.
There are also a female Aslan and they are available together in the Aslan Traveller package.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
The figure is sculpted by Flavored Pickle.
This package includes:
- Aslan Civilian - Male - Presupported.stl
- Aslan Civilian - Male.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Action Pack
To operate the Sleipnir-class we have created a rag-tag crew of five: Lana (the Gunner), Katarzyna (the Medic), Kimiko (the Commander), Günther (the Engineer) and Daz (the Pilot) representing a mishmash of Terrans, Martians and Spacers. In this package they are in action position. Five minis in total. The crew also come in standing, seated and zero-g poses. Check them out!
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels.They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
Lana, Kimiko, Günther, Katarzyna and Daz in action positions, both presupported and support-free
Aslan Female Traveller Miniature
This is a female Aslan, a bipedal carnivore inhabitan of the Traveller universe.
There are also a male Aslan and they are available together in the Aslan Traveller package.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
The figure is sculpted by Flavored Pickle.
This package includes:
- Aslan Civilian - Female - Presupported.stl
- Aslan Civilian - Female.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Standing Pack
To operate the Sleipnir-class we have created a rag-tag crew of five: Lana (the Gunner), Katarzyna (the Medic), Kimiko (the Commander), Günther (the Engineer) and Daz (the Pilot) representing a mishmash of Terrans, Martians and Spacers. In this package they are standing. Five minis in total. The crew also come in action, seated and zero-g poses. Check them out!
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels.They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Lana, Kimiko, Günther, Katarzyna and Daz in standing positions, both presupported and support-free
Aslan Travellers Traveller Miniatures
These are Aslan, bipedal carnivore inhabitans of the Traveller universe.
They are also available separately as Aslan Female and Aslan Male.
The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
The figures are sculpted by Flavored Pickle.
This package includes:
Aslan Civilian - Female - Presupported.stl
Aslan Civilian - Female.stl
Aslan Civilian - Male - Presupported.stl
Aslan Civilian - Male.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Crew Pack
To operate the Sleipnir-class we have created a rag-tag crew of five: Lana (the Gunner), Katarzyna (the Medic), Kimiko (the Commander), Günther (the Engineer) and Daz (the Pilot) representing a mishmash of Terrans, Martians and Spacers. They each come in four different poses: standing, seated, armed and Zero-G. 20 miniatures in total!
The miniatures were commissioned by 2nd Dynasty and sculpted by Papsikels.They are provided in 32mm scale but are easily scaled to 28mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers. The miniatures shown in the picture are printed by Proteus 3D Modelling and painted by David Wood.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Five crewmembers in four different poses
- Crash Couch
- Crash Couch - Screen
Beowulf Milestones (Stretch Goals)
Currently Available:
- Dead Spaceman
- Jump 2
- Fuel Bladders
- Beowulf Decals PDF
- Manoeuvre 2
- Power 2
- Rear Airlock
- Garage Workshop
- Garage 3D Printer
- Vacc Suit Lockers
- Sardine Low Berths
- Quad Beam Turret
- Mezzanine
- Gig Deck Plans 0.8
- Gig Deck Plans - PDF
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Crew Miniatures I
This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included. Note that in this version there is a male captain and female crew members!
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Captain Chair.stl
- Captain in Chair 90.stl
- Pilot With Helmet.stl
- Pilot Without Helmet.stl
- Tech With Helmet.stl
- Tech Without Helmet.stl
- I 1x1 Bridge Captain Chair.stl
I_1x1_Bridge_Chair_Type_1_1.0.stl
I_1x1_Bridge_Pilot_Controls_1.0.stl
I_1x1_Bridge_Rear_Controls_1.0.stl
28mm Type A Free Trader Beowulf
Current Version: 1.0.7 (2/3/2023)
The most ubiqutous ship of the Third Imperium is the Type A Free Trader, commonly known as the Beowulf-class. This Official Traveller vessel has been beautifully recreated from Traveller 5 deck plans into a 28mm scale (1:59) monstrosity that brings the most iconic Traveller player ship onto your tabletop.
Features:
- 28mm Type A Free Trader Beowulf STL Files
- Three stackable decks that are easily removed for easy access and play
- Designed to easily install third party lighting from Zoromerlights.com
- Customise the interior with accessories, such as larger engines or jump drives
- Print rapidly with 3MF build plates
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Big Gun Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Transport Delta Big Gun Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
Turret - Tactical.stl
Transporter_270_Big_Gun_Back_Mini.stl
Transporter_270_Big_Gun_Front_Mini.stl
Mini Stand.stl
Turret - 270 1.1.stl
Transporter_270_Big_Gun_Back.stl
Transporter_270_Big_Gun_Front.stl
270 Stand 1.1.stl
Deck Plans
Get the 2D Deck Plans for the Free Trader Beowulf, Scout/Courier, and Seeker in pdf formats and images suitable for VTTs including alpha channels.
INCLUDES:
- Type A Free Trader Beowulf PDF Deck Plans
- Type S Scout/Courier PDF Deck Plans
- Type J Seeker PDF Deck Plans
- Type A Free Trader Beowulf VTT Deck Plans
- Type S Scout/Courier VTT Deck Plans
- Type J Seeker VTT Deck Plans
Chimera Airlock Expansion Kit
Modify your Chimera with a forward airlock to easily land on strange new worlds and get your crew to ground level. Perhaps you are looking to load cargo from the bottom or top of the ship. These airlocks include movable doors, offer additional pressurised points of entry into your vessel, and can be opened and closed.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations in length, height and witdh. And with a forward airlock.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
28mm Foldable Jump Seats
Designed by popular request for those in our Tribe. The Foldable Jump Seats allow you to fit temporary chairs on your ship, or perhaps you want to run a passenger vehicle. Available in a comfortable standard length and short length. Easily rotate the seat, with it auto stopping midway.
Comes with 8 files. With left end, double chairs, right end, in both Armed and Armless versions.
Scout Ship Beta Cargo Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Cargo Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout Ship - Cargo Variant - Mini - Front.stl
Scout Ship Beta - Base Model - Tactical - Rear.stl
Mini Stand.stl - Turret - Tactical.stl
Scout Ship - Cargo Variant - 270 - Front.stl
Scout Ship Beta - Base Model - 270 - Rear.stl
270 Stand 1.1.stl - Turret - 270 1.1.stl
28mm Grav Bike
The Official Traveller grav bike is a very useful vehicle while travelling on a planet. It can carry one driver and one passenger and is particulary practical in courier and scouting missions.
The generic grav bike we designed was based on the designs of Rob Caswell. For more information, see the Traveller wiki:
https://wiki.travellerrpg.com/Grav_Bike
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scout Ship Beta Patrol Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Patrol Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout Ship - Patrol Boat Variant - Mini - Rear.stl
Scout Ship Beta - Base Model - Tactical - Front 1.1.stl
Mini Stand.stl - Turret - Tactical.stl
Scout Ship - Base Model - 270 - Front 1.1.stl
Scout Ship - Patrol Boat Variant - 270 - Rear.stl
270 Stand 1.1.stl - Turret - 270 1.1.stl
28mm Air Raft Van
Even though most air rafts are capable of reaching orbit they are not intended for extended flight in space. Instead are air rafts a good way to travel around on many worlds in the Traveller universe.
Air rafts comes in several different models and this package contains a van.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Space Shuttle Alpha Bus Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha Bus variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Space Shuttle Alpha Base Tactical Mini Rear.stl
Shuttle Alpha - Bus Variant - Mini - Front 1.1.stl
Mini Stand.stl
Shuttle Alpha - Bus Variant - 270 - Front.stl
Shuttle Alpha - Base Model - 270 - Rear 1.1.stl
270 Stand.stl
Deck Plans Type J Seeker
Main Deck Available!
Still to come: More variants and Decks!
This deck plan package includes dozens of variants for many tabletop play situations for both self-printing and for use with Virtual Tabletops. Please note that this package contains pdf files to print poster maps and png files for virtual tabletop only.
The poster maps that can be printed at scale or in handout size, suitable for printing on own conventional printer or using a printing service.
Features:
- A topdown poster map for each deck of the ship
A topdown poster map for the exterior of the ship
Variants for landed and in space
A spec sheet showing the ship from multiple angles
Of course, not all of us have the time to make it to a game in real life. Over the last decade, the use of virtual tabletops, such as Fantasy Grounds, Roll20 and Foundry, has exploded, allowing gamers to dial in and play traditional pen and paper tabletop games online with friends from all over the world.
With this in mind, we also provide Virtual TableTop versions of our deck plans, or VTT for short. VTT deck plans consist of a collection of png images with transparency to allow layering in your favourite virtual tabletop application.
Features:
- Images with transparent backgrounds for layering
Neutral lighting so you can set lighting yourself
Modular pieces to customise the interior layout of your ship
A collection of beds, furniture, partitions and machinery for said customisation
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Upper Deck Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display Upper Deck Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Turret - Tactical.stl
Transport - Upper Storey - Tactical - Rear.stl
Transport - Upper Storey - Tactical - Front.stl
Mini Stand.stl
Turret - 270 1.1.stl
Transport - Upper Storey - 270 - Rear.stl
Transport - Upper Storey - 270 - Front.stl
270 Stand.stl
Deck Plans Type S Scout/Courier
New Update - This deck plan package now includes pdf files to print poster maps for each deck of the ship in A1 and A2 (594 x 841mm and 420 x 594mm).
BETA VERSION RELEASED
This deck plan package includes dozens of variants for many tabletop play situations for both self-printing and for use with Virtual Tabletops. Please note that this package contains pdf files to print poster maps and png files for virtual tabletop only.
The poster maps that can be printed at scale or in handout size, suitable for printing on own conventional printer or using a printing service.
Features:
- A topdown poster map for each deck of the ship
- A topdown poster map for the exterior of the ship
- Variants for landed and in space
- A spec sheet showing the ship from multiple angles
Of course, not all of us have the time to make it to a game in real life. Over the last decade, the use of virtual tabletops, such as Fantasy Grounds, Roll20 and Foundry, has exploded, allowing gamers to dial in and play traditional pen and paper tabletop games online with friends from all over the world.
With this in mind, we also provide Virtual TableTop versions of our deck plans, or VTT for short. VTT deck plans consist of a collection of png images with transparency to allow layering in your favourite virtual tabletop application.
Features:
- Images with transparent backgrounds for layering
- Neutral lighting so you can set lighting yourself
- Modular pieces to customise the interior layout of your ship
- A collection of beds, furniture, partitions and machinery for said customisation
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Saucer Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Transport Delta Saucer Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Turret - Tactical.stl
Transporter_270_Saucer_Front_Mini.stl
Transporter_270_Saucer_Back_Mini.stl
Mini Stand.stl
Turret - 270 1.1.stl
Transporter_270_Saucer_Front.stl
Transporter_270_Saucer_Back.stl
270 Stand.stl
Deck Plans Free Trader Beowulf
New Update - This deck plan package includes pdf files to print poster maps for each deck of the ship in A1 and A2 (594 x 841mm and 420 x 594mm).
0.5 OUT NOW - Base version in VTT!
This deck plan package includes dozens of variants for many tabletop play situations for both self-printing and for use with Virtual Tabletops. Please note that this package contains pdf files to print poster maps and png files for virtual tabletop only.
The poster maps that can be printed at scale or in handout size, suitable for printing on own conventional printer or using a printing service.
Features:
- A topdown poster map for each deck of the ship
A topdown poster map for the exterior of the ship
Variants for landed and in space
A spec sheet showing the ship from multiple angles
Of course, not all of us have the time to make it to a game in real life. Over the last decade, the use of virtual tabletops, such as Fantasy Grounds, Roll20 and Foundry, has exploded, allowing gamers to dial in and play traditional pen and paper tabletop games online with friends from all over the world.
With this in mind, we also provide Virtual TableTop versions of our deck plans, or VTT for short. VTT deck plans consist of a collection of png images with transparency to allow layering in your favourite virtual tabletop application.
Features:
- Images with transparent backgrounds for layering
- Neutral lighting so you can set lighting yourself
- Modular pieces to customise the interior layout of your ship
- A collection of beds, furniture, partitions and machinery for said customisation
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Upper Cockpit Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Transport Delta Upper Cockpit Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
Turret - Tactical.stl
Transporter_270_Upper_Cockpit_Front_Mini.stl
Transporter_270_Upper_Cockpit_Back_Mini.stl
Mini Stand.stl
Turret - 270 1.1.stl
Transporter_270_Upper_Cockpit_Front.stl
Transporter_270_Upper_Cockpit_Back.stl
270 Stand.stl
1:270 Beowulf Starship Miniatures
This is the 1:270 scale Beowulf. This package includes one starship but it comes in two different scales, 1:270 and tactical.
The 1:270 scale makes for great display piece, and while large on the table, it's not so large as to be impractical.
The tactical scale scales the ship down to fit on a 1 inch hex base stand and are of a practical size to be played on a one-inch hex map for tactical combat.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Gunship Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Transport Delta Gunship Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Transport - Gunship - Tactical - Rear.stl
Transport - Gunship - Tactical - Front.stl
Mini Stand.stl
Transport - Gunship - 270 - Rear.stl
Transport - Gunship - 270 - Front.stl
270 Stand.stl
28mm Rampart Light Fighter
USD 8.00
An Official Traveller 28mm Rampart-class Light Fighter, this vehicle is all engine, allowing the pilot to quickly intercept in atmosphere or deep space at constant accellerations of up to 6G.
This is a single seat variant. Comes with stand and landing gear options.
For more general information, see the Traveller wiki:
https://wiki.travellerrpg.com/Rampart_class_Light_Fighter
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Asymmetric Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Transport Delta Asymmetric Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Turret - Tactical.stl
Transport - Asymmetric - Tactical - Rear.stl
Transport - Asymmetric - Tactical - Front.stl
Mini Stand.stl
Turret - 270 1.1.stl
Transport - Asymmetric - 270 - Rear.stl
Transport - Asymmetric - 270 - Front.stl
270 Stand.stl
Cargo Containers
These cargo containers are suitable for use with 28mm miniatures. Includes standard and sealed containers, containers with controlled environment, ordinary and reinforced crates, all with lids and in different sizes. Also included are gas canisters, open frame crates and liquid containers.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Transport Delta. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Turret - Tactical.stl
Transport - Base Ship - Tactical - Rear.stl - Transport - Base Ship - Tactical - Front.stl
Mini Stand.stl - Turret - 270 1.1.stl
Transport - Base Ship - 270 - Rear.stl
Transport - Base Ship - 270 - Front.stl
270 Stand.stl
Traveller Starship Miniatures KS Edition
USD 69.00
This is the Traveller Starship Miniatures Kickstarter Edition, i.e. both the core ships and the ships that where included in the Stretch Goals, a total of 52 starships in two different scales, 26 in each. The ships, which featured most prominently in the Traveller5 Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to use two scales.
The first, 1:270 scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is Tactical scale, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The core ships feature a variety of popular classic Traveller designs, all originally visualised by Ian Stead, aside from our own Murphy-class Type S Scout/Courier (both versions of the Type S have been provided for collectors). From merchant vessels to system patrol boats and mercenary cruisers, they range in size from 100 to 800 tons (as per the Traveller rules).
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Space Shuttle Alpha Winged Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha Winged Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Shuttle Alpha - Winged Variant - Mini - Rear.stl
Shuttle Alpha - Winged Variant - Mini - Front.stl
Mini Stand.stl
Shuttle Alpha - Winged Variant - 270 - Rear.stl
Shuttle Alpha - Winged Variant - 270 - Front.stl
270 Stand.stl
Beta Centauri
A 28 mm scale conversion of our Scout Ship Beta design to the Traveller Universe, includes bridge, state rooms, galley, air raft garage, cargo bay, and drive compartment with jump drives, manoeuvre drives and a power plant.
Includes
- 28mm Beta Centauri Standalone STL Files
Space Shuttle Alpha Warp Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha Warp Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Shuttle Alpha - Warp Variant - Mini - Rear.stl
Shuttle Alpha - Warp Variant - Mini - Front.stl
Mini Stand.stl
Shuttle Alpha - Warp Variant - 270 - Rear.stl
Shuttle Alpha - Warp Variant - 270 - Front.stl
270 Stand.stl
28mm Traveller Character Miniatures
USD 53.00
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc in different poses, a mixture of Vargr soldiers and pirates, Aslan, Hivers and more, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Space Shuttle Alpha Twin Engine Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha Twin Engine variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Shuttle_Twin_Engine_270_Mini_Front.stl
Shuttle_Twin_Engine_270_Mini_Back.stl
Mini Stand.stl
Shuttle_Twin_Engine_270_Front.stl
Shuttle_Twin_Engine_270_Back.stl
270 Stand.stl
Traveller Dead Astronaut
This dead astronaut miniature is a variant of the Traveller Spacesuit miniatures in a Halloween special! It was sponsored by the Free Trader Beowulf Kickstarter campaign for Halloween 2022!
The Traveller universe is not always kind to explorers. This Astronaut died in either a long forgotten battle, a terrible event, or in character creation.
Comes in two poses, floating in space and "seated". LYS and pre supported STL files included.
Modelled by Kyoushuneko Miniatures
Space Shuttle Alpha Turret Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha Turret variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Shuttle_Turret_270_Front_Mini.stl
Shuttle_Turret_270_Back_Mini.stl
Mini Stand.stl
Shuttle_Turret_270_Front.stl
Shuttle_Turret_270_Back.stl
270 Stand.stl
Dead Space Suit 28mm Miniature
Made available to tribe subscribers in October 2022.
The ship has been over run, losses are mounting. Your mission is to explore the remains of the Ataphoi.
This two pack includes two minis:
- Dead Space Suit Sitting
- Dead Space Suit Lying
Sculpted by Anton Moskvichev. Remixed by 2nd Dynasty.
Supports are included for resin at 28 mm, tested by MonCapitan.
Space Shuttle Alpha Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Space Shuttle Alpha Base Tactical Mini Rear.stl
- Space Shuttle Alpha Base Tactical Mini Front.stl
- Mini Stand.stl
- Shuttle Alpha - Base Model - 270 - Rear 1.1.stl
- Shuttle Alpha - Base Model - 270 - Front 1.2.stl
- 270 Stand.stl
Ghost Ship Ataphoi 28mm Starship
The damaged hulk drifts through space, shrouded in the blackness of space and its twisted metal glinting in starlight with the promise of mystery. Was the Ataphoi destroyed by pirates for its cargo, or by the imperial navy because of some alien infestation? Are there any survivors, or is it legitimate salvage? What secrets do its mostly intact hull hold?
This 28 mm scale modular starship makes a perfect spooky encounter or the perfect set piece for a game day. The Ataphoi is based on the Starship Chimera design, and has a printed length at 28mm of over 90 cm (3 feet)!
For Chimera veterans, the Ataphoi makes use of the ghost ship, escape pods, forward airlock, and a host of favourites plucked from the Cerberus and Pegasus. It also includes 45 brand new parts to tell a story, from battle-damaged parts such as the punctured power core, beam damage that cuts through the entire ship, and high fidelity cryotubes, some of which have a suspicious fist-sized crack that look to have been made from the inside...
Instructions with print list is provided.
Scout Ship Beta Gunboat Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Gunboat Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout_Type_2_Turret_270_Back.stl
- Scout_Type_2_Turret_270_Front.stl
- Shuttle Alpha - 270 Stand.stl
- Turret - 270 1.1.stl
- Mini Stand.stl
- Scout_Type_2_Turret_Front_Mini.stl
- Scout_Type_2_Turret_Mini_Back.stl
- Turret - Tactical.stl
Benjaminen
This is a silly cartoon sculpt of Ben's head, modeled mostly for humor. Share your prints in the discord or below. Those that print this file and share it will get a special role in our discord server.
Note: This also includes a turret version designed to be used on 2nd Dynasty ships.
Scout Ship Beta Stretch Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Stretch Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout Ship - Stretch Variant - 270 - Front.stl
- Scout Ship_Misile_270_Rear.stl
- Shuttle Alpha - 270 Stand.stl
- Turret - 270 1.1.stl
- Mini Stand.stl
- Scout Ship - Stretch Variant - Mini - Front.stl
- Scout Ship_Misile_Mini_Rear.stl
- Turret - Tactical.stl
Delivery Space Cat - Tribes Miniature
Released as part of our Tribe In September 2022.
This adorable delivery space cat is ready to go in 5 poses and even includes a miniature vehicle! Produced in 28 mm and 32 mm with base STL, supported STL, and Lychee Slicer files.
This miniature was produced by Kyoshunkeo Miniatures.
Scout Ship Beta Civilian Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Civilian Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout_civilian_270_Back.stl
- Scout_civilian_270_Front.stl
- Shuttle Alpha - 270 Stand.stl
- Turret - 270 1.1.stl
- Mini Stand.stl
- Scout_civilian_Mini_Back.stl
- Scout_civilian_Mini_Front.stl
- Turret - Tactical.stl
Type Y - Yacht Traveller Miniatures
The Type Y - Yacht was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type Y - Yacht
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scout Ship Beta Missile Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Missile Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout Ship_Misile_270_Rear.stl
- Scout_Misile_270_Front.stl
- Shuttle Alpha - 270 Stand.stl
- Turret - 270 1.1.stl
- Mini Stand.stl
- Scout Ship_Misile_Mini_Front.stl
- Scout Ship_Misile_Mini_Rear.stl
- Turret - Tactical.stl
Type SD - Dragon SDB Traveller Miniatures
The Type SD - Dragon SDB was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type SD - Dragon SDB
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scout Ship Beta Airlock Variant Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta Airlock Variant. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout Ship - Side Airlock - 270 Front 1.1.stl
- Scout Ship - Side Airlock - 270 Rear 1.1.stl
- Shuttle Alpha - 270 Stand.stl
- Turret - 270 1.1.stl
- Mini Stand.stl
- Scout Ship - Side Airlock - Tactical Front 1.1.stl
- Scout Ship_Side Airlock_Mini_Rear.stl
- Turret - Tactical.stl
Type R - Subsidized Merchant Traveller Miniatures
The Type R - Subsidized Merchant was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type R - Subsidized Merchant
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scout Ship Beta Tactical Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Scout Ship Beta. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. We recommend printing at 150 microns (0.15 mm) or finer with 3-4 perimeters and 15%+ infill.
This package includes:
- Scout Ship - Base Model - 270 - Front 1.1.stl
- Scout Ship Beta - Base Model - 270 - Rear.stl
- Shuttle Alpha - 270 Stand.stl
- Turret - 270 1.1.stl
- Mini Stand.stl
- Scout Ship Beta - Base Model - Tactical - Front 1.1.stl
- Scout Ship Beta - Base Model - Tactical - Rear.stl
- Turret - Tactical.stl
Type L - Laboratory Ship Traveller Miniatures
The Type L - Laboratory Ship was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type L - Laboratory Ship
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sofa And Table Pack - Scatter Terrain
Decorate your tabletop with detailed scatter pieces, including sofas, tables and chair, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes:
- Table.stl
- Special Table Standalone.stl
- Special Sofa Standalone.stl
- Sofa.stl
- Sofa Half Circle Unbased.stl
- Single Chair.stl
Wolfram AH-222 Stinger Aerospacecraft
The Stinger is an aerospacecraft useful for cyberpunk and other futuristic science fiction settings. Heavily armed for rampaging cyborg control by the Advanced Police unit, it is equipped with three cannons and its main rotor allows for manoeuvrability through tight urban areas such as between skyscrapers.
Designed to work well alongside Papsikel's cyberpunk miniatures.
Instructions included as PDF and fully animated in 3Dio.
Science and Medical Pack - Scatter Terrain
Decorate your tabletop with detailed scatter pieces, including several sample containers and analysis benches, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes:
- Analysis Bench Base - Unbased.stl
- Analysis Bench Base and Sample Containers- Unbased.stl
- Large Sample Container Base.stl
- Large Sample Container Glass.stl
- Large Sample Container Top.stl
- Medical Scanner A - Unbased.stl
- Medical Scanner B - Unbased.stl
- Sample Container Base.stl
- Sample Container Glass.stl
- Sample Container Lid.stl
- Sample Container One Piece.stl
Joey Pratts - Papsikels Promotional Miniature
We are highly pleased to announce that our friends from Papsikels Patreon have just launched a new kick-ass crowdfunding campaign on the MMF platform.
The Cyber Saga begins here and we invite you to check it out right now and support the highly creative and beautifully sculpted work that Papsikels is known for.
Bed Pack - Scatter Terrain
Decorate your tabletop with detailed scatter pieces, including several different beds, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes several bunk beds, double beds, single beds and cryo chambers.
Type CE - Gig
The Type CE - Gig was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type CE - Gig
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Control Panel Pack - Scatter Terrain
Decorate your tabletop with detailed scatter pieces, including several control panels, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes 13 STL files, including navigation controls, helm controls, steampunk controls and many more.
Ninz Zhodani Scout Traveller Miniatures
The Ninz Zhodani Scout was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Ninz Zhodani Scout
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Machinery Pack - Scatter Terrain
Decorate your tabletop with detailed scatter pieces, including several tanks, generator and FTL Drive, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes:
- 1x1 - Unbased - I - Engineering Battery.stl
- 1x1 - Unbased - I - Engineering Generator.stl
- 1x1 - Unbased - I - Engineering Shield Generator 1.1.stl
- 1x1 - Unbased - I - Engineering Tanks.stl
- 2x1 - Unbased - I - Engineering Tank.stl
- Machinery FTL Drive Unbased.stl
- Machinery Power Generator Unbased.stl
- Machinery Server Unbased.stl
- Machinery Thruster Unbased.stl
- Wall - A - Engineering - Machinery - Type I - Contiguous - Unbased.stl
- Wall - A - Engineering - Machinery - Type I - Stand Alone - Unbased.stl
Type U - Armed Packet Traveller Miniatures
Type U Armed Packet was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type U Armed Packet
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Computer Pack - Scatter Terrain
Decorate your tabletop with detailed scatter pieces, including several control panels and servers, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes:
- Bridge - I - Angled Control Panel - Grimlight Edition - Unbased.stl
Bridge - I - Chimera Control Panel - Unbased.stl
Bridge - I - Flat Control Panel - Unbased.stl
Bridge - I - Pilot Controls - Unbased.stl
1x1 - I - Server - Type II - Closed - Unbased.stl
1x1 - I - Server - Type II - Open - Unbased.stl
2x1 - Unbased - S - Computer Chair.stl
2x1 - Unbased - S - Computer Terminal.stl
Type S - Scout with Wings & Snub Nose
Type S - Scout with Wings and Snub Nose was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type S - Scout with Wings and Snub Nose
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Side Engines Expansion Kit
Change the profile of your Chimera starship with side engines.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the Chimera Side Engines Expansion Kit there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type J - Seeker (2nd Dynasty) Traveller Miniatures
This iconic ship from the Traveller Role-Playing Game, Type J - Seeker (2nd Dynasty) miniature, was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type J - Seeker (2nd Dynasty)
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera VTOL Engines Expansion Kit
If you want your Chimera starship to be able to perform vertical take off and landing these two models of VTOL engines will do the trick. You can mix and match the positions in multiple ways.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the Chimera VTOL Engines Expansion Kit there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type J - Seeker Traveller Miniatures
Type J - Seeker was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type J - Seeker
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Sandcrawler Expansion Kit
With tank treads your Chimera starship will be transformed to a land vehicle able to make its way through difficult terrain. The continous tracks are articulated and prints in place.
A tip: It is essential to get good straight layers, especially the first layer, to get a good result when printing these.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the Chimera Sandcrawler Expansion Kit there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type GE - Gunned Escort Traveller Miniatures
Type GE - Gunned Escort was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type GE - Gunned Escort
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Landing Gear Expansion Kit
The Chimera Landing Gear Expansion Kit offers some variant landing gears for your Chimera starship. They are important if you want to put feet on the Chimera with angled underside, add additional support when lengthening the ship, or remove the gear completely and have closed versions.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the Chimera Landing Gear Expansion Kit there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Donosev Science Ship - Traveller Miniatures
Donosev Science Ship was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Donosev Science Ship
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Manouevrability Pack
The Chimera Manoeuvrability Pack offers the ability to switch out the standard sleek hull with manoeuvring thrusters (RCS) variants for a more Newtonian look for your Chimera starship.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the Chimera Manouevrability Pack there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type E - Corvette Traveller Miniatures
Type E - Corvette was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type E - Corvette
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Ghost Ship Expansion Kit
Create Chimera-themed space wrecks with this Chimera Ghost Ship Expansion Kit. A total of 14 pieces can be added to your haul, allowing several damage states.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like Ghost Ship Expansion Kit there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type K - Safari Traveller Miniatures
Type K - Safari was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type K - Safari
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Turret Ports Expansion Kit
With a big ship, comes big turret ports. The Chimera Turret Ports Expansion Kit will let you add dorsal, ventral and side turrets to your Chimera starship or different versions of the Chimera starship universe.
The big turret only fits on the top of base Chimera or versions that are in the same or broader width. The small one fits on all of the versions, including Chimera Pathfinder and Cerberus. The Cerberus is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
Please note that you will need the base ship Chimera, Chimera Pathfinder or Cerberus to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type A2 - Far Trader Traveller Miniatures
Type A2 - Far Trader was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type A2 - Far Trader
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Flat Top Expansion Kit
Want a more squared dorsal surface for your Chimera? Forget tapering, and add a squared flat top with this expansion kit. Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the flat top there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Solomani Trader Traveller Miniatures
The Solomani Trader was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Solomani Trader
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Raised Bridge Expansion Kit
Modify your Base Chimera Starship to integrate this Raised Bridge. The raised bridge have an alternate front middle deck, and move the bridge up one level. This has the benefit of allowing the Chimera to stack vertically without duplicating the bridge, and mix and match blockiness and sleekness.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the raised bridge there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Pinnace Traveller Miniatures
The Pinnace was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Pinnace
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Skinny Expansion Kit
CURRENT VERSION: 1.1
Modify your Base Chimera Starship to a slimmer model. The Chimera Skinny adds more than 40 new tiles to slim your base Chimera down to something slightly more manageable for your printer and tabletop. Two versions will let you take an inch or two off her waist, allowing for slender, sleeker variants. Includes the necessary hull plating variants and bulkheads of course.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations in length, height and width. With the Chimera Skinny tiles you have the tools to make it thinner.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Hiver Explorer Traveller Miniatures
The Hiver Explorer was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Hiver Explorer
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Plus Expansion Kit
Plus size your Base Chimera Starship with the Chimera Plus expansion kit. The kit adds more than 60 unique tiles and components to the Chimera to scale it up to titanic proportions! Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations in length and height. And in widht with the Plus Expansion kit.
Here are some features that can be expanded:
Front Ramp
Expandable bridge
9 inch bulkheads (interior)
Modular bulkheads (not recommended) for 10 inches plus, OR, smaller combinations
5 and 6 inch wide ribs for the top and bottom, plus some thicker kinds that are modular width-wise
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Tribes - Mini Rover
Made for our Tribes, the Mini Rover comes articulated and ready to move two minis around!
Designed to fit inside the MKIV Cargo Bay.
Articulation Points
- Tires Spin
- Rods move up and down
- Front tire rod holder rotates
- Steering Wheel can rotate
- Steering Wheel can move up and down
Chimera Angled Underside Expansion Kit
Add a touch of elegance to your Base Chimera Starship by integrating this Angled Underside. The angled underside turns The Chimera into a aerodynamic, sleeker variant. This version comes with the required parts to angle the bottom half of the ship.
Please note that you will need the base ship to be able to build this variant.
The Base Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The stock Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
It is completely modular, so that you can create you own variations, lengthen, heighten or widen and with expansions like the angled underside there are even more ways for the Chimera to live up to its name.
Please note that these are STL files only!
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Talon Interceptor - Starfighter II
Make your own Talon Interceptor starfighter in 28-mm scale, including a pilot!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
Vacuum Loader Mech
Created by the Cult of Pickle, this Loader mech is designed to be used in zero-g and comes complete with an external storage housing compatible with our Sleipnir series 3D printable starship.
Includes five poses and the alternate housing hull section designed to replace one of the Sleipnir's lower PDCs.
Type S Scout Courier T5 Murphy Traveller Miniatures
Type S Scout Courier T5 Murphy Traveller Miniatures was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type S Scout Courier T5 Murphy
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Starfighter Modular System II
We have created a second starfighter pack to offer even more starfighter variants, compatible with the original pack or as a standalone.
Type S Scout Courier Traveller Miniatures
Type S Scout Courier was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type S Scout Courier
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Starship IV Core Pledge
CURRENT VERSION: 1.3
Get the Starship Chimera STL files and all Starship IV campaign stretch goals. The Core Pledge also includes the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts. The Pathfinder has no stretch goals.
Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License
Starship Chimera Pathfinder STL Files
Non-Commercial Printing License
Type P Vargr Corsair Traveller Miniatures
Type P Vargr Corsair was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type P Vargr Corsair
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Kickstarter Edition
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Also includes all Transport Delta-related stretch goals from Starship III Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type M Subsidized Liner Traveller Miniatures
Type M Subsidized Liner was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type M Subsidized Liner
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scout Ship Beta Kickstarter Edition
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Contains over 50 pieces
Minimal support requirements
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Also includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type CE Close Escort Traveller Miniatures
Type CE Close Escort was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type CE Close Escort
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Rover
Modular rover at 28mm scale, assembles with OpenLOCK clips.
Type C Mercenary Cruiser Traveller Miniatures
Type C Mercenary Cruiser was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type C Mercenary Cruiser
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Mech Miniatures
A fantastic collection of mechs officially licensed from Papsikels! Includes five main mech types, with several variants. From power suits to drones, this has your near future mech itch scratched!
Type A Free Trader Traveller Miniatures
Type A Free Trader was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales. An iconic ship from the Traveller Role-Playing Game, the model is based on the version by Ian Stead and has been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Type A Free Trader
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Spacesuit Miniatures
This package includes 20 spacesuit miniatures in a variety of poses. Modelled by the Cult of Pickle.
1:270 Turrets Miniatures
A conversion of many of our previous turret designs for use with 1:270 scale miniatures, compabible with our Traveller and Starship designs.
Traveller: Traveller Starship Miniatures I, Traveller Starship Miniatures II, Traveller Starship Miniatures III, Traveller Miniatures Starship IV.
2nd Dynasty Starships: Notinante, Pegasus Starship Miniature, Cerberus Starship Miniature, Pathfinder Starship Miniature, Chimera Starship Miniatures.
The turrets connects with the ships usings 1.75mm filament (not included).
Includes 19
1:270 Turret Miniature STL Files
Chimera Pegasus Upgrade
CURRENT VERSION: 1.0.2
If you already have the Chimera, this is all the new parts and instructions to make the Pegasus, a brand new Chimera variant for transporting civilians from one planet to another.
28mm Type S Scout/Courier KS Edition
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Pegasus
A brand new Chimera variant for transporting civilians from one planet to another.
⠀
⠀
⠀
⠀
Shuttle Alpha MK IV Frontier Milestones
These files contain the Frontier Milestones we unlocked during the Frontiers campaign initial weeks. Included are:
Currently released:
- Side Mounts - Add back VTOL engines like on the MKIII or any of our turrets (purchased separately)
- Cargo Module - Replaced cargo bay with ability to hold a 3x3x6 metre cargo container
Chimera Cerberus Upgrade
CURRENT VERSION: 1.1
If you already have the Chimera, this is all the new parts and instructions to make the Cerberus.
WARNING: Requires Chimera or Pathfinder base ship.
A brand new Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
Parts are compatible with the Chimera and Pathfinder standalone ships.
20-Ton Launch Passenger Cabin
This cabin is especially made for the Traveller small craft 20-ton Launch. The cabin is designed to make it easy to rebuild your Launch into a passenger shuttle.
The standard 20-Ton Launch is a versatile ship used for a wide range of missions - often on a larger vessel - such as shuttling passengers, cargo, or acting as a lifeboat.
The Launch is not included in this package, but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Shuttle Alpha MK IV Kickstarter Stretch Goals
The Kickstarter Stretch Goals that were unlocked for the Shuttle Alpha MK IV Kickstarter campaign. Everything should now be available.
- Tail Fins
- Dorsal Ring/AWACS (added missing turret ring)
- Shuttle Alpha MKIII Fidelity Pass (assembly guide included)
- Extended Hull (Bus)
- Fixed Wings
- Missile Pods
- Side Ramp
Details
Tail Fins
Adds three options of ventral tail fins, dorsal tail fins, or both. Compatible with all other variants of the MKIV (but not MKIII)
Dorsal Ring/AWACS
Adds a turret port to the dorsal fuselage, which can be used to mount a turret (now included), or an AWACS radome. Now AWACS clip is included.
Shuttle Alpha MKIII Fidelity Pass (AKA MKIIIB)
This is the big one, an update of the MKIII (aka the old Shuttle Alpha design) to MKIV fidelity. In addition to 4 times the fidelity, the engines have been redesigned to accomodate a light kit, and the VTOL engines are now modular and designed to fit the MKIV engine style. They are completed with a pair of gun hard points.
Extended Hull (Bus)
This variant allows the lengthening of the MKIV in both the rear cargo section, and the forward cabin. The forward section is compatible with the MKIII (and earlier).
Rear landing gear placement is moved slightly in the rear cargo section, and parts have been included to allow the further extension of the cargo section beyond just one section.
Fixed Wings
The fixed wings variant adds a pair of wings, replacing the side gun mounts. Additionally, the nose is changed to have two gun mounts in a retro-style configuration. The wings mount two cannons and have two triple missile racks each. Can be combined with the missile pods and tail fins to make a truly awesome MKIV variant.
Missile Pods
Inspired by the drop ship from Aliens, this modification adds a bit of Itano Missile Circus to the MKIV. The pods hold 15 missiles each, and the arms swing out from the fuselage to launch.
Side ramp
The final modification is the side ramp. This adds a slide door the the forward fuselage slightly behind the cockpit. New doorways are included to move the cockpit, cabin and cargo bay dividers forward half an inch (0.75 metres at full scale). A smaller galley is included, and a custom floor piece for the folding steps and cockpit alterations.
Chimera Cerberus
CURRENT VERSION: 1.1
A brand new Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship is an impressive hobby project on its own that will keep you busy for weeks, and a fantastic prop or hero piece to add to your tabletop.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Shuttle Alpha MK IV
Latest News: Resin files available thanks to Daemonara!
We have redesigned our best selling Space Shuttle Alpha for 2022 with the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
During the course of the campaign, we have unlocked the stretch goals shown above. For higher resolution renders, scroll down the the Stretch Goals section of the page.
Shuttle Alpha Mk IV is a 28mm scale (1:59/1 OpenLOCK tile = 1.5 m/~5 ft.) 3D printable spaceship that stylistically is at home in a multitude of science fiction universes.
It is detailed inside and out, and fits together gluelessly with the OpenLOCK clip system (clips included).
The Shuttle Alpha line has proven to be our most popular item for a reason - it's an impressive entry level ship for your 3D printed tabletop, taking only a few days to print! It might be smaller than some of our other starships, yet still provides plenty of wow factor and excitement at game time.
Here is a rundown of some of its most prominent features:
- 28mm Scale
- Modular interior - You can use any OpenLOCK tiles to customise the layout of the interior
- Removable top for easy play
- Articulated rear ramp and landing gear bay doors
- Optimised for FDM printing
- Glue-less assembly with OpenLOCK clips (included)
- Custom lighting ready
The Shuttle Alpha MKIV is over a foot long in its 1:59/28mm scale. The dimensions are as follows:
Length: 325 mm (12.7") | Width: 170 mm (6.7") | Height: 117 mm (4.6") | Weight: Approximately 775 g of PLA (8% infill)
The interior of the Shuttle Alpha MK IV consists of a series of modular OpenLOCK tiles. It is compatible with all our previously existing tile designs, and each tile fits to a 1" grid (25.4mm), the same scale used in many popular Tabletop games.
The default layout is configured to have a cockpit with a pilot seat, co-pilot seat and two passenger seats.
Behind the cockpit is a sealed cabin that contains a double bunk, WC, and a small kitchenette for extended missions.
Finally, the rear third of the shuttle is dedicated to cargo.
Sleipnir Crew Stretch Goals
Current Version: 1.2
Crew Stretch Goals from Starship V Sleipnir Sleipnir Crew pledge. All miniatures by Papsikels! Included are seated, Zero-G and Action poses for the core Sleipnir Crew, the Psychopath, Marine armour, Drones, Maintenance Android and Mohawked Female Mechanic.
28mm Official Traveller 30-Ton Slow Boat
USD 29.95
An official Traveller Small Craft. This 30-ton vessel commonly referred to as a Slow Boat features a streamlined hull including fixed wings and trades thrust for greater cargo capacity.
The Slow Boat originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured in January of 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
- FDM optimised
- 3MF build plates for quick and easy printing
- Functional airlock and cargo bay doors
- Lighting ready (we used a 3 volt coincell battery with a 5mm blue LED)
- Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
28mm Type J Seeker
USD 49.95
Now with parts that lets you install light kits!
In the Traveller Tabletop Universe the Type J Seeker is a rebuilt Type S Scout/Courier, one of the iconic starships. The Type J Seeker is usually converted to a mining ship but they are also known to be used in illicit circumstances.
The Seeker is a fully 3D-printable spaceship scaled for 28mm (1:59) play in your favourite Tabletop RPG, Wargame or for display. The Type J Seeker is highly detailed inside and out. Compatible with the OpenLOCK system created by and available at Printable Scenery.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Stretch Goals
Sleipnir Stretch Goals from Starship V Sleipnir.
Includes:
- Additional Hull Mounts
- Boarding Tube
- Drone Room
- External Cargo Pods (requires Additional Hull Mounts)
- Hull Extenders
- Miniature
- Single Engine
- Spinal Mounted Rail Gun
- Standalone Galley
- Standard Turret Ports
- Starfighter Umbilical (requires Standard Turret Ports and Starfighter)
- Top PDCs
- Torpedo Tubes (requires Additional Hull Mounts)
Drashoon Miner - Tribes Miniature
This Miniature was voted by users in our Tribe
The Arboreal Drashoon, when operating on a human ship, clamber along all the pipes that run along the overhead bulkheads. When planetside, or on a station they often use mechanized walkers. This Drashoon is mining away at a rare mineral.
This is a two pack including a Drashoon holding the sample, and comes with pre-supported and no supports.
Miniature Modelled By: That Blasted Samophlange
Sleipnir Crew
The Sleipnir Crew consists of a rag-tag team of hardy individuals. Lana, Katarzyna, Kimiko, Günter and Daz (seen here painted by David Woods).
Sculpted by Papsikels, our crew represents a mish-mash of Terrans, Martians and Spacers, and are in 32 mm, but can easily be rescaled to 28 mm (by scaling down to 87.5%).
Versions with and without supports are provided.
Beta Centauri Miniatures
The Beta Centauri Mini is a conversion of our own Scout Ship Beta design to the Traveller Universe. It was first released in our Kickstarter campaign Traveller Starship Miniatures. This package includes one starship but it comes in two different scales.
We have designed the starship miniatures to print in two scales.
The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Beta Centauri Miniature
Starship Sleipnir
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and ready to take lighting in the engine and airlock room.
Light Kits are available here.
Current Version: 1.2
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
Version 1.1 Updates
- Reoriented several parts from Deck 11 to print optimally. Please note, Hull - Deck 11 - Engineering - Floor - Corner Engine Mount.stl will now require reorientation
- Fixed gap in Interior - Deck 05 - I - Sink and Grower.stl
Traveller Starship Miniatures IV
This is our forth package of our officially licensed Traveller Starship Miniatures. This release includes a total of 12 starships, six each in two different scales. The ships, which featured most prominently in the Traveller Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales.
The first, ”1:270” scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled accurately to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is ”Tactical scale”, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The ships feature a variety of popular classic Traveller designs, originally visualised by Ian Stead. From explorer vessels to far traders, they range in size from 100 to 200/400 d-tons (as per the Traveller rules).
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported and unsupported versions are available.
This package includes starships (in both 1:270 and Tactical scale), clips and stands:
- Ninz Zhodani Scout
Type CE – Gig
Type L – Laboratory Ship
Type R – Subsidized Merchant
Type SD – Dragon SDB
Type Y – Yacht
Clips
Stands
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Crew Miniatures II
This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included. Note that in this version there is a female captain and male crew members!
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Starships IV - Captain v.2(R).stl
Starships IV - Pilot with Helmet v.3(R).stl
Starships IV - Pilot without Helmet v.3(R).stl
Starships IV - Tech no Helmet v.3(R).stl
Starships IV - Tech with Helmet v3(R).stl
Traveller Starship Miniatures III
This is our third package of our officially licensed Traveller Starship Miniatures. This release includes a total of 14 starships, seven each in two different scales. The ships, which featured most prominently in the Traveller Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales.
The first, ”1:270” scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled accurately to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is ”Tactical scale”, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The ships feature a variety of popular classic Traveller designs, most originally visualised by Ian Stead, aside from our own Type S Scout with Wings Snub Nose and Type J Seeker (2nd Dynasty) (both versions of the Type J have been provided for collectors). From science vessels to gunned escort, they range in size from 100 to 500 d-tons (as per the Traveller rules).
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported and unsupported versions are available.
This package includes starships (in both 1:270 and Tactical scale), clips and stands:
- Donosev Science Ship
Type E – Corvette
Type GE - Gunned Escort
Type J – Seeker
Type J – Seeker (2nd Dynasty)
Type S – Scout with Wings Snub Nose
Type U – Armed Packet
Clips
Stands
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
OpenLOCK Clip Variants
These Openlock Clip variants will help improve stability in 2nd Dynasty's starships Chimera and Pathfinder and they are free of use.
Please note that these are STL files only!
This package includes:
- OpenLOCK 2 and Half Inch Clip.stl
- OpenLOCK 4.5 inch Clip Key Stabilizer.stl
- OpenLOCK 5.5 inch Clip Key Stabilizer.stl
- OpenLOCK 8 inch Clip Key Stabilizer.stl
- OpenLOCK 8 inch Clip Stabilizer.stl
- OpenLOCK Half Clip.stl
- OpenLOCK Half Inch Clip.stl
- OpenLOCK Inch Clip.stl
- OpenLOCK Inch Tooth Clip.stl
- OpenLOCK Peg Clip.stl
- Wedge_Clip.stl
- Laderwell_Clip.stl
- Joint_Clip.stl
Traveller Starship Miniatures II
This is our second package of our officially licensed Traveller Starship Miniatures. This release includes a total of 12 starships, six each in two different scales. The ships, which featured most prominently in the Traveller Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales.
The first, ”1:270” scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled accurately to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is ”Tactical scale”, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The ships feature a variety of popular classic Traveller designs, originally visualised by Ian Stead, aside from our own Beta Centauri. From explorer vessels to far traders, they range in size from 100 to 200 d-tons (as per the Traveller rules).
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported and unsupported versions are available.
This package includes starships (in both 1:270 and Tactical scale), clips and stands:
- Beta Centauri
Hiver Explorer
Pinnace
Solomani Trader
Type A2 – Far Trader
Type K – Safari
Clips
Stands
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Storage Tanks
Expand your Starship deck plans with these storage tank tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 2x1 - Floor - S - Engineering Tank.stl
2x1 - Unbased - S - Engineering Tank.stl - 1x1 - Floor - I - Engineering Tanks.stl
1x1 - Unbased - I - Engineering Tanks.stl
Kaylee Pushing Cart - Tribes Miniature
A big starship requires a lot of maintenance. Engineer Kaylee will take care of everything. In this pose she is pushing a cart.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided both pre-supported and support free in 32mm and 28mm scale.
You will need a 3D printer or print service to print the miniature. It has been designed with SLA printer in mind but can be printed on FDM printer.
Server II
Expand your Starship deck plans with these server tiles, both open and closed, based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - I - Server - Type II - Closed - Unbased.stl
1x1 - I - Server - Type II - Closed 1.1.stl - 1x1 - I - Server - Type II - Open - Unbased.stl
1x1 - I - Server - Type II - Open 1.1.stl
Heavy Fighter - Starfighter II
Available free the month of July for all in our Tribe!
Make your own Heavy Starfighter in 28-mm scale, including a pilot!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
Triple Bunks
Expand your Starship deck plans with these triple bunk tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- S - Triple Bunk - Opposite1.1.stl
S - Triple Bunk - Recessed - Opposite 1.1.stl
S - Triple Bunk - Recessed - Unbased.stl
S - Triple Bunk - Recessed 1.1.stl
S - Triple Bunk 1.1.stl
Triple Bunk - Unbased - Opposite 1.1.stl
Triple Bunk - Unbased 1.1.stl
30-Ton Vehicle Module
IMPORTANT! Vechicle not included, the G-Carrier can be found here.
This 30-Ton Module variant for the Modular Cutter is designed to transport a vehicle from orbit to a planet. The module is designed to work with our Official Traveller G-Carrier and Official Traveller Modular Cutter.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Traveller Starships Miniatures I
This is our first package of our officially licensed Traveller Starship Miniatures. This initial release includes a total of 14 starships, seven each in two different scales. The ships, which featured most prominently in the Traveller Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to print in two scales.
The first, ”1:270” scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled accurately to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is ”Tactical scale”, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The ships feature a variety of popular classic Traveller designs, most originally visualised by Ian Stead, aside from our own Murphy-class Type S Scout/Courier (both versions of the Type S have been provided for collectors). From merchant vessels to system patrol boats and mercenary cruisers, they range in size from 100 to 800 d-tons (as per the Traveller rules).
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported and unsupported versions are available.
This package includes starships (in both 1:270 and Tactical scale), clips and stands:
- Type A Free Trader
Type C Mercenary Cruiser
Type CE Close Escort
Type M Subsidized Liner
Type P Vargr Corsair
Type S Scout/Courier
Type S Scout/Courier T5 Murphy Type
Clips
Stands
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Shield Generator
Expand your Starship deck plans with these shield generator tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - Floor - I - Engineering Shield Generator.stl
1x1 - Unbased - I - Engineering Shield Generator.stl
Tribes - Openable Lockers
From hiding away as aliens crawl by to the mundane of storing your space suit, openable lockers are a must upgrade to your base and ship. With ample capacity and wide fit to store all your munitions and loved ones!
Set includes 4 door combinations in three variants, a full tile, half tile, and half tile with floor. Contains 14 STL files. Also contains one build plate for Prusa Mini.
Machinery Generator
Expand your Starship deck plans with these machinery generator tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - Floor - I - Engineering Generator.stl
1x1 - Unbased - I - Engineering Generator.stl
Space Shuttle Alpha Hard Points Variant Upgrade
Modify your Space Shuttle Alpha to integrate this Hard Points Variant piece. Please note that you will need the base ship to be able to use this piece.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle Alpha - Nose - Hard Points - 1.1.stl
- Laser Cannon Clip.stl
Engineering Wall
Current version: 1.1 - 04/09/2020
Expand your Starship deck plans with these engineering wall tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wall - A - Engineering - Machinery - Type I - Contiguous - Unbased.stl
Wall - A - Engineering - Machinery - Type I - Contiguous.stl
Wall - A - Engineering - Machinery - Type I - Stand Alone - Unbased.stl
Wall - A - Engineering - Machinery - Type I - Stand Alone.stl
Small Craft - Grant Engine Module
USD 8.95
The Grant Engine Module is an alternative engine section compatible with our Small Craft, primarily the modular cutter, ship's boat, launch and gig. It uses the design language attributed to classic Traveller artist, Glenn Grant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Fury - Starfighter II
Make your own Fury starfighter in 28-mm scale, including a pilot!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
Machinery Battery
Expand your Starship deck plans with these battery tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - Floor - I - Engineering Battery.stl
1x1 - Unbased - I - Engineering Battery.stl
Starship: The Next Generation Unlocks
All unlocks are now feature complete, let us know if you have any issues.
Bridge Controls III
Expand your Starship deck plans with these bridge control III tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - Bridge - I - Chimera Control Panel - Unbased.stl
1x1 - Bridge - I - Chimera Control Panel 1.1.stl
Starship: The Next Generation Core STL Files
Early in 2022 we completely redesigned our original science fiction Openlock corridor and engineering tile sets from Starship I. We call them Starship: The Next Generation.
With the corridor tiles you are able to make a network of passages to connect rooms, chambers and compartments together in a vessel, space station or terrestial base.
The engineering tiles are designed to represent engine rooms, drive compartments, power generator housings, maintenance walkways, air, water and fuel pump rooms and all manners of industrial or mechanical components of a starship, station or base.
In total there are more than 130 tiles and 25 of them allow wall combinations of the corridor to the engineering designs – you can have corridor design on one side and engineering design on the other.
Distinguishing features:
- High Fidelty Redesign – scale, look and features of the parts are greatly improved. They will print excellent on FDM machines at 0.15 mm layer heights, and SLA machines will see even more fantastic results
- Removable Walls – The top half of the walls can be kept on for gorgeous display or removed for easy of play
- Sliding Clip Corners – we have replaced Openlocks full clip system with our sliding clips which allow clip connections for all directions, allowing more stable constructions
- Print Orientation Optimised – each piece has been pre-rotated into the optimal printing orientation and designed to print with maximum detail on a a FDM machine, and will print brilliantly on a SLA machine
- Support Free (FDM) – All the parts print support free on our Prusa I3 Mk35, although some parts can maintain higher quality with supports added (mostly pipes)
- SLA Friendlier design – we are not offering complete SLA support, we have removed all the built-in openlock-supports and most tiles will print flat on the build plate and will not require drainage if you print solid
- 3mf Future Proof – We are designing our parts with 3mf in mind in the future
Computer Station
Expand your Starship deck plans with these computer station tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 2x1 - Floor - S - Computer Chair.stl
2x1 - Floor - S - Computer Terminal.stl
2x1 - Unbased - S - Computer Chair.stl
2x1 - Unbased - S - Computer Terminal.stl
Invader Interceptor - Starfighter II
Make your own Invader Interceptor starfighter in 28-mm scale, including a pilot!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
Coffin Bunks
A place to rest. Expand your Starship deck plans with these coffin bunk bed tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- S - Coffin Berth - Opposite 1.1.stl
S - Coffin Berth - Unbased.stl
S - Coffin Berth - Wide - Unbased 1.1.stl
S - Coffin Berth - Wide.stl
S - Coffin Berth.stl
Marshal in Zero-G - Scout Crew Miniature
This is Marshal, one of the Scout crew members. In this product he is in zero-g and he is also available in four more poses: seated, in action, lying down and standing at ease.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Cabinets and Closets
Furnish your captain's or passenger's room with these cabinet and closet tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Cabinet - Standalone.stl
Closets - Standalone 1.1.stl
Drawer - Standalone.stl
Entertainment Cabinet - Standalone.stl
Nat in Zero-G - Scout Crew Miniature
This is Nat, one of the Scout crew members. In this product she is in zero-g and she is also available in four more poses: standing at ease, seated, in action and lying down.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Marshal. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
State Room Bed
Expand your Starship with a fancy state room bed tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Bed - Standalone.stl
Nat Lying Down - Scout Crew Miniature
This is Nat, one of the Scout crew members. In this product she is lying down and she is also available in four more poses: standing at ease, seated, in action and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Marshal. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Third Class Seating
The Chimera third class seating is an option for those passengers whom might not want or can not spend the extra money for travelling in more comfortable and expensive style. The tiles are suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Long Window.stl
- S Third Class Pod Closed.stl
- S Third Class Pod Open.stl
Nat in Action - Scout Crew Miniature
This is Nat, one of the Scout crew members. In this product she is in action but she is also available in four more poses: standing at ease, seated, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Marshal. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera State Room
Get a fancy place for your fancier passengers (or captains) to stay. Expand your Starship deck plans with these state room tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 4x3 - Stateroom - Empty.stl
4x3 - Stateroom - Furnished.stl
Cabinet - Standalone.stl
Closets - Standalone.stl - Closets - Standalone 1.1.stl
DoorTypeC.stl
Double Bed - Standalone.stl
Drawer - Standalone.stl
Entertainment Cabinet - Standalone.stl
Entertainment System - Standalone.stl
Outer Hull - Upper Deck - State Room Window.stl
Nat Seated - Scout Crew Miniature
This is Nat, one of the Scout crew members. In this product she is seated and she is also available in four more poses: standing at ease, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Marshal. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Crew Quarters
Expand your Starship deck plans with these Chimera crew quarters tiles, some both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 3x3 - Crew Cabin.stl
DoorTypeC.stl
Double Bunk - Unbased - Opposite.stl
Double Bunk - Unbased.stl
S - Coffin Berth - Opposite.stl
S - Coffin Berth - Wide.stl
S - Coffin Berth.stl
S - Triple Bunk - Opposite1.1.stl
S - Triple Bunk - Recessed - Opposite 1.1.stl
S - Triple Bunk - Recessed 1.1.stl
S - Triple Bunk 1.1.stl
Triple Bunk - Unbased - Opposite 1.1.stl
Triple Bunk - Unbased 1.1.stl
Nat Standing - Scout Crew Miniature
This is Nat, one of the Scout crew members. In this product she is standing at ease and she is also available in four more poses: seated, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Marshal. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Escape Pods
Compatible with Starship Chimera, Cerberus, Pathfinder and Pegasus
Get the crew to safety in an emergency. Expand your Starship deck plans with these escape pod tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles. The pods are able to take four people each, and might even function as a mini shuttle.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Escape Pod - Airlock Shield.stl
- Escape Pod - Interior.stl
- Escape Pod - Nose.stl
- Escape Pod - R - Base.stl
- Escape Pod - Rear.stl
- Escape Pod - Screen.stl
- Escape Pod - Short Top Rib.stl
- Escape Pod - Standard Top Rib.stl
Marshal Lying Down - Scout Crew Miniature
This is Marshal, one of the Scout crew members. In this product he is lying down but he is also available in four more poses: seated, in action, standing at ease and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Machinery Pack
Expand your Starship deck plans with these machinery tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - Floor - I - Engineering Battery.stl
1x1 - Floor - I - Engineering Generator.stl
1x1 - Floor - I - Engineering Shield Generator.stl
1x1 - Floor - I - Engineering Tanks.stl
2x1 - Floor - S - Engineering Tank.stl
Wall - A - Engineering - Machinery - Type I - Contiguous.stl
Marshal in Action - Scout Crew Miniature
This is Marshal, one of the Scout crew members. In this product he is in action but he is also available in four more poses: seated, standing at ease, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Broadside Weapons Pack
Expand your Starship deck plans with these weapon tiles, with print in place shutters. The tiles are suitable for use with 28-32mm miniatures and compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Large Bore Frame.stl
Large Bore Laser Generator.stl
Large Bore Laser.stl
Large Bore Missile Silo.stl
Large Laser Cover.stl
Six Shooter Frame.stl
Six Shooter Generator.stl
Six Shooter Lasers.stl
Six Shooter Missile Silos.stl
Six Shooter Missile.stl
Marshal Seated - Scout Crew Miniature
This is Marshal, one of the Scout crew members. In this product he is seated but he is also available in four more poses: standing at ease, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Cargo Pack
Expand your Starship deck plans with these cargo pack tiles, suitable for use with 28-32mm miniatures. Includes two variants of cargo loaders, three different sizes of container cubes, three variants of triangular containers and a weapons case. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
Cargo - Large Cube.stl
Cargo - Large Rectangular.stl
Cargo - Large Triangular.stl
Cargo - Small Cube.stl
Cargo - Small Triangular - Rails.stl
Cargo - Small Triangular.stl
Cargo - Weapons Case.stl
Cargo Loader - Body.stl
Cargo Loader - Loader Arm - Left.stl
Cargo Loader - Loader Arm - Right.stl
Cargo Loader - Magnetic Arm - Left.stl
Cargo Loader - Magnetic Arm - Right.stl
Marshal Standing - Scout Crew Miniature
This is Marshal, one of the Scout crew members. In this product he is standing at ease but he is also available in four more poses: seated, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Doc and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Computer Pack
Expand your Starship deck plans with these computer pack tiles, including both control panels and servers, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 1x1 - Bridge - I - Angled Control Panel - Grimlight Edition.stl
- 1x1 - Bridge - I - Chimera Control Panel.stl
- 1x1 - Bridge - I - Flat Control Panel.stl
- 1x1 - Bridge - I - Pilot Controls.stl
- 1x1 - I - Server - Type II - Closed.stl
- 1x1 - I - Server - Type II - Open.stl
- 2x1 - Floor - S - Computer Chair.stl
- 2x1 - Floor - S - Computer Terminal.stl
Jade in Zero-G - Scout Crew Miniature
This is Jade, one of the Scout crew members. In this product she is in zero-g, but she is also available in four more poses: seated, in action, standing at ease and lying down.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Asha, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Airlocks
Expand your Starship deck plans with these airlock tiles, the doors are mechanical, and have a slot in between to allow them to slide open. Suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- 4x4 - Large Interior Airlock - Half.stl
- Large Airlock Door Half - Opposite.stl
- Large Airlock Door Half.stl
- Outer Hull - Upper - Lower - Large Airlock Rib - Half.stl
Jade Lying Down - Scout Crew Miniature
This is Jade, one of the Scout crew members. In this product she is lying down, but she is also available in four more poses: seated, in action, standing at ease and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Asha, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Starfighter Pack
Current version: 1.4 - Compatible with Operation Maelstrom
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
Jade in Action - Scout Crew Miniature
This is Jade, one of the Scout crew members. In this product she is in action, but she is also available in four more poses: seated, standing at ease, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Asha, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Starfire MKII Starfighter
The Starfire has been updated to the MKII version. At present, it lacks assembly instructions, however, a build plate is included so a parts list is no longer required. Primary differences are in the wing mechanisms. The wing clips require great force to insert, we recommend inserting in wing first, and then the fuselage.
- Increased detail
- Detachable landing gear
- Mechanical wings that can be opened or closed for landing
- Revised cockpit canopy for friendlier printing
- Build plate for drag and drop printing
Make your own Starfire Fighter in 28-mm scale, including a pilot! Compatible with your favourite weapons from Turrets Pack I!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
This product includes
- Starfire Fighter stl-files
- 28mm Seated Pilot
- OpenLOCK Clips
Jade Seated - Scout Crew Miniature
This is Jade, one of the Scout crew members. In this product she is seated, but she is also available in four more poses: standing at ease, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Asha, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Basilisk Starfighter
Make your own Basilisk starfighter in 28-mm scale, including a pilot! Compatible with your favourite weapons from Turrets Pack I!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
This product includes
- Starfighter Basilisk stl-files
- 28mm Seated Pilot
- OpenLOCK Clips
Jade Standing - Scout Crew Miniature
This is Jade, one of the Scout crew members. In this product she is standing at ease, but she is also available in four more poses: seated, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Asha, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Lancer Starfighter
This item will be released free for all in the Tribe September 2022
Make your own Lancer starfighter in 28-mm scale, including a pilot! Compatible with your favourite weapons from Turrets Pack I!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
This product includes
- Starfighter Lancer stl-files
- 28mm Seated Pilot
- OpenLOCK Clips
50-Ton Modular Cutter
One of the most flexible vessels in the Traveller universe, the Modular Cutter is designed to port 30-ton cargo modules and is analogous to a space semitrailer truck.
We have designed our Modular Cutter to be able to detach and replace the 30-ton module just as it would in the Traveller universe.
The dimensions of the Modular Cutter at 1:59/28mm
- Length: 617.4mm (24.3in)
Beam: 96.5mm (3.8in)
Draught: 105.9mm (4.2in)
The dimensions at scale
- Length: 36.4metres (119.5ft)
Beam: 5.7m (18.7ft)
Draught: 6.2m (20.5ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Doc in Zero-G - Scout Crew Miniature
This is Doc, one of the Scout crew members. In this product he is in zero-g but he is also available in four more poses: seated, in action, lying down and standing at ease.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Arrow Starfighter
This item was released free for all in the Tribe August 2022 Now includes Arrow MKII 2023 update!
Make your own Arrow starfighter in 28-mm scale, including a pilot! Compatible with your favourite weapons from Turrets Pack I!
Includes OpenLOCK Clips from the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package.
This product includes
- Starfighter Arrow stl-files
- 28mm Seated Pilot
- OpenLOCK Clips
- Arrow MKII updated design
The Arrow MKII is a 2023 update for the Arrow starfighter. This was made in conjunction with Operation Maelstrom, an evolution of the original Starfighter Modular System that the Arrow was derived from. The update includes increased fidelity, a cockpit revamp, and the addition of our brand new missile system. While there are not yet specific instructions, it assembles as per the original Arrow instructions, with the addition of the missile weapon systems.
40-Ton Pinnace
Named after small craft of the age of sail, the Pinnace is fast, can move a fair amount of cargo, and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship.
The Pinnace features functioning canards, swing wings, a fold out ramp, removable engine housing panels, and an underfloor power plant compartment.
The dimensions of the Pinnace at 1:59/28mm
- Length: 473.6mm (18.6in)
Beam: 339mm (13.3in)
Draught: 117mm (4.6in)
The dimensions at scale
- Length: 27.9metres (91.7ft)
Beam: 20m (65.6ft)
Draught: 6.9m (22.6ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Doc Lying Down - Scout Crew Miniature
This is Doc, one of the Scout crew members. In this product he is lying down but he is also available in four more poses: seated, in action, standing at ease and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Gantry Pack
Current Version: 1.1 - 16/09/2020
Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes different crossbeams, pillars and tracks.
30-Ton Ship's Boat
A versatile vessel with a powerful M-Drive, the Ship's Boat can transport passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat has an ample airlock, vault, fresher, passenger section, cargo section and drive compartment. The layout overall offers a wide range of flexibility in play styles.
The dimensions of the 30-Ton Ship's Boat at 1:59/28mm
- Length: 479.9mm (18.9in)
Beam: 89.1mm (3.5in)
Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 28.3metres (92.9ft)
Beam: 5.3m (17.2ft)
Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers
- disembarking on a landing pad
Sliding Garage Doors - For easy loading of cargo and luggage - Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
- 3MF build plates are provided for quick prints
- Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Doc in Action - Scout Crew Miniature
This is Doc, one of the Scout crew members. In this product he is in action but he is also available in four more poses: seated, standing at ease, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Corridor II Double Plate Floors
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. These double plate floor tiles are from the Corridors II set but can be used in combination with any OpenLOCK tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2018 Starship II Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 5 high detail floor tiles, including:
- I, S, SB, E and ED tiles
A basic print & paint guide
20-Ton Launch
The 20-ton Launch is quite a small vessel in the Traveller universe. Just 20 metres in length it is often used as a shuttle for cargo and crew on larger vessels.
A versatile platform used for a wide range of missions, such as for shuttling passengers, cargo, or acting as a lifeboat, the Launch is cheap, slow and ubiquitous.
It features a cockpit, airlock, fresher (WC), a cargo bay with both a main cargo area as well as an underfloor cargo area, and a small engineering room where the powerplant and manoeuvre drive is situated.
The dimensions of the Launch at 1:59/28mm
- Length: 339.2mm (13.4in)
- Beam: 89.1mm (3.5in)
- Draught: 94.2mm (3.7in)
The dimensions at scale
- Length: 20metres (65.7ft)
- Beam: 5.3m (17.2ft)
- Draught: 5.6m (18.2ft)
Other features are
- Detailed Interiors - Scaled for 28mm play (can be rescaled in slicer)
- Rotating Airlock Door - Suitable for docking in larger vessels in tight quarters
- Extendable Airlock Gangway - For passengers disembarking on a landing pad
- Sliding Garage Doors - For easy loading of cargo and luggage
- Removable tops for ease of play
- Removable Landing Gear
- Removable Iris Doors
Design features
- Designed for FDM 3D printing at 0.2 - 0.1 mm layer height
- Assembles without glue using a combination of OpenLOCK clips and our own new clip system
- Each of our craft prints support free (supports where used are for added stability for fast printers with input shaping)
- Optional channels for 4.5mm metal support rods
3MF build plates are provided for quick prints - Support to install a coin cell battery with a 5mm LED lamp for engine lights
- Full assembly instructions
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Doc Seated - Scout Crew Miniature
This is Doc, one of the Scout crew members. In this product he is seated but he is also available in four more poses: standing at ease, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Corridors II Walls
These wide corridors create a beautiful sci-fi aesthetic perfect for diorama scenes or fully visualised play. Doorway variants and crawlspace entrances are included to create more access points.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2018 Starship II Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes high detail tiles, including:
- Type A door
- SB Wide Doorway Door
- Iris Hatches (half and full)
- S and II S-Wall corridors
- SA S-Wall Doorways, 3 variants
- SB S-Wall Doorway, 1 variant, plus separate frame for support-free printing
- EN and II S-Wall corners
- S S-Wall crawlspace access points (lower and upper) and vent
- S Window section
- A basic print & paint guide
Small Craft Miniatures
USD 16.00
The 1:270 and tactical versions of the official Traveller small crafts the Launch, the Ship's Boat, the Pinnace and the Modular Cutter. Also includes the 1:270 and tactical versions of the Rampart Light Fighter and the Two-Seated Rampart.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Doc Standing - Scout Crew Miniature
This is Doc, one of the Scout crew members. In this product he is standing at ease but he is also available in four more poses: seated, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Asha, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Corridors II Half Walls
These wide corridors create a beautiful sci-fi aesthetic while providing more room for play with an x-ray look inside the walls. Crawlspace entrances and doorways included to create more access points.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2018 Starship II Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes high detail tiles, including:
- Type A door
- Iris Hatch
- S and II half S-Wall corridors
- SA Half S-Wall Doorways, 3 variants
- EN and II half S-Wall corners
- S half S-Wall crawlspace access point and vent
- A basic print & paint guide
Asha in Zero-G - Scout Crew Miniature
This is Asha, one of the Scout crew members. In this product she is in zero-g, but she is also available in four more poses: standing at ease, in action, lying down and seated.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Long Variant Upgrade
Current version: 1.1.1
Modify your Transport Delta to integrate this Long Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Rampart Two-Seat Variant
USD 9.95
This is our two-seated variant of the Official Traveller 28mm Rampart-class Light Fighter. This variant, sometimes called the FL-128/2 is used for training exercises and battlefield command. The command and control version has the pilot seated at the nose and the RIO at the rear. In a trainer version, the trainee sits in the front seat, with the instructor in the rear seat.
The aerofighter design has a removable cockpit canopy, swappable landing gear, and modular weapons system.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Asha Lying Down - Scout Crew Miniature
This is Asha, one of the Scout crew members. In this product she is lying down, but she is also available in four more poses: standing at ease, in action, seated and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scout Ship Beta Hammerhead Variant Upgrade
Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.
Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.
Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Traveller Grav Pack
USD 22.00
Even though most air rafts are capable of reaching orbit they are not intended for extended flight in space. Instead are air rafts a good way to travel around on many worlds in the Traveller universe.
Air rafts comes in several different models and this package includes a van, a grav bike and a base two-seater Air Raft and a four seater and tray back options with a Saloon, Coupe and Pickup variant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Asha in Action - Scout Crew Miniature
This is Asha, one of the Scout crew members. In this product she is in action, but she is also available in four more poses: standing at ease, seated, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Turrets Pack IV
Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Type A Free Trader Beowulf KS Edition
USD 127.00
The most ubiqutous ship of the Third Imperium is the Type A Free Trader, commonly known as the Beowulf-class. This Official Traveller vessel has been beautifully recreated from Traveller 5 deck plans into a 28mm scale (1:59) monstrosity that brings the most iconic Traveller player ship onto your tabletop.
Features:
- 28mm Type A Free Trader Beowulf STL Files
- Three stackable decks that are easily removed for easy access and play
- Designed to easily install third party lighting from Zoromerlights.com
- Customise the interior with accessories, such as larger engines or jump drives
- Print rapidly with 3MF build plates
and 16 Stretch Goals:
- Jump 2
- Fuel Bladder
- Decals
- Power 2
- Sardine Low Berths
- Dead Astronaut
- Manoeuvre 2
- 30ton Gig Deckplans
- Rear Airlock
- Mezzanine
- Workshop
- Garage 3D Printer
- Garage Workshop
- Vacc Suit Locker
- Quad Beam Laser Turret
- Life Support Controls
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Asha Seated - Scout Crew Miniature
This is Asha, one of the Scout crew members. In this product she is seated, but she is also available in four more poses: standing at ease, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Starship Chimera
The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds.
The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only!
Chimera contains approximately 400 parts and more than 100 unique parts.
Not only can the stock Chimera be configurated in a number of ways, you will get even more variation with these costumised expansions:
G-Carrier
USD 15.95
Sponsored by Traveller Small Craft Kickstarter Campaign
If you're a fan of old-school Traveller and its iconic 80s style, you're in for a treat. We've meticulously designed and crafted a 28mm STL file set for 3D printing that brings to life the beloved G-Carrier, a classic from the golden era of sci-fi gaming. Get ready to embark on thrilling interstellar adventures with this timeless vehicle model!
Based on the vintage Traveller stats, the G-Carrier is an 8-ton marvel of engineering. It's built to transport your squad from planetary surfaces to the vastness of space and back. The G-Carrier boasts an array of features, including a turret for added firepower, a rear ramp for easy entry and exit, an escape hatch for quick getaways, and a side hatch for flexible access. With heavy armor plating, your squad will be well-protected during your interstellar escapades.
- Minimal Support Required: We understand the importance of easy printing. That's why our G-Carrier design has been optimized to minimize the need for supports. You'll spend less time on post-processing and more time enjoying your printed models.
- Includes Build Plate: To further enhance your 3D printing experience, we've included a build plate. It's designed to make the printing process more convenient and efficient, ensuring your G-Carrier comes out just the way you want it.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Asha Standing - Scout Crew Miniatures
This is Asha, one of the Scout crew members. In this product she is standing at ease, but she is also available in four more poses: seated, in action, lying down and in zero-g.
The miniature can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are four more crew members on the Type S Scout/Courier: Doc, Jade, Marshal and Nat. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Pathfinder
Current Version: 1.0.9
The Chimera Pathfinder is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Chimera Pathfinder is detailed inside and out and a variety of configurations can be used to customise the deck plans.
Please note that these are STL files only!
Chimera Pathfinder contains approximately 260 parts and more than 70 unique parts.
Stingray Transmedium Fighter
The Stingray Transmedium Fighter is a flying submarine used to take out surface and sub-surface naval vessels and make a speedy getaway in the skies or beneath the waves. It is the smaller cousin of the Manta Dive Bomber.
Features a cockpit that can be opened, detachable torpedos, and a rotating propeller shaft.
Nat: All Poses - Scout Crew Miniature
This is Nat, one of the Scout crew members. The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Doc and Calvin. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Battlemover
Create your own battlemover, suitable for your Sci-Fi rpg or tabletop wargame! The battlemover could be a giant robot tank, or scaled down to build security droids.
The model is fully articulated for easier printing and posing. The parts snap together for glueless assembly. Suitable for use with 28-32mm miniatures. These tiles are commercially available versions of 2nd Dynasty's 2017 Starship Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
Battlemover head
Battlemover torso
Battlemover waist
Battlemover arms (3 parts each)
Battlemover legs (4 parts each)
A basic print & paint guide
Manta Dive Bomber
The Manta Dive Bomber is a trans-medium flying submarine used to take out surface and sub-surface naval vessels and make a speedy getaway in the skies or beneath the waves. It features twin cockpits and four built-in torpedo tubes. Its large flying wing configuration allows for an external ordinance of an additional six torpedos if stealth is unimportant.
Comes with a variety of alternative engine sizes and styles, so if you prefer two propellers and one aerial propulsion engine, it is possible.
Features twin cockpits that can be opened and a rotating propeller shaft. Compatible with our display stand.
Marshal: All Poses - Scout Crew Miniature
This is Marshal, one of the Scout crew members. The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Doc, Jade, Nat and Calvin. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Upper Cockpit Variant Upgrade
Modify your Transport Delta to integrate this Upper Cockpit Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- AirlockDoor_A.stl
- Transport - Asymmetric Variant - Dorsal Bridge Airlock.stl
- Transport - Asymmetric Variant - Ventral Bridge Airlock.stl
- Transport - Upper Hull - Cockpit.stl
- Upper Cockpit Variant - Dorsal Midsection - Left Side.stl
- Upper Cockpit Variant - Dorsal Midsection - Right Side.stl
- Upper Cockpit Variant - Shield Generator and Turret Well.stl
Hemisphere Cab
This is an alternative cab for the Modular Cutter and other Small Craft from the Traveller Small Craft line of official Traveller RPG products. The hemisphere cab rounds out the cab of the small craft and makes it more in line with the original modular cutter designs.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Starfighter Miniatures I
This package includes four miniature models (1:185 scale) of the following aerospace vehicles: ASF-09A Firefly, Spidercrab SRV, Gaeru Barth, and the AH-222 Stinger.
We have been making 1:270 scale versions of our starships for many years, but these are slighty larger to make them easier to paint and also they will approximate the size used in the X-Wing dogfighting game.
If you are looking for more starfighter minis you should check out Starfighter Miniatures II.
This package includes:
- Firefly - 185 Mini.stl
- Gaeru Barth - 185 Mini.stl
- Spidercrab - 185 Mini.stl
- Stinger - 185 Mini.stl
- Stands
Jade: All Poses - Scout Crew Miniature
This is Jade, one of the Scout crew members. The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Doc, Marshal, Nat and Calvin. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Big Gun Variant Upgrade
Modify your Transport Delta to integrate this Big Gun Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Large Gun Barrel.stl
- Large Turret Bottom.stl
- Large Turret Ring.stl
- Large Turret Top.stl
- Transport - Big Gun Variant - Top Shield Large Turret Ring.stl
Starfighter Miniatures II
This package includes four miniature models (1:185 scale) of the following aerospace vehicles: Hornet, Lamprey Pirate Breaching Pod, Gaeru Zalg, and Astrofire.
We have been making 1:270 scale versions of our starships for many years, but these are slighty larger to make them easier to paint and also they will approximate the size used in the X-Wing dogfighting game.
If you are looking for more starfighter minis you should check out Starfighter Miniatures I.
This package includes:
- Astro Fire - 185 Mini.stl
- Gaeru Zalg - 185 Mini.stl
- Hornet - 185 Mini.stl
- Lamprey - Pirate Breaching Pod - 185 Mini.stl
- Stands
Doc: All Poses - Scout Crew Miniature
This is Doc, one of the Scout crew members. The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Asha, Jade, Marshal, Nat and Calvin. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Transport Delta Saucer Variant Upgrade
Modify your Transport Delta to integrate this Saucer Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Transport - Saucer Variant - Cockpit.stl
- Transport - Saucer Variant - Lower Saucer - Left Side.stl
- Transport - Saucer Variant - Lower Saucer - Right Side.stl
- Transport - Saucer Variant - Lower Side.stl
- Transport - Saucer Variant - Lower Turret Ring - Left Side.stl
- Transport - Saucer Variant - Lower Turret Ring - Right Side.stl
- Transport - Saucer Variant - Upper Saucer - Left Side.stl
- Transport - Saucer Variant - Upper Saucer - Right Side.stl
- Transport - Saucer Variant - Upper Side.stl
Plants and Map
Bonus items we used as set dressing for Operation Maelstrom
Asha: All Poses - Scout Crew Miniature
This is Asha, one of the Scout crew members. The 28mm figure comes in five different poses: standing at ease, action, lying down, zero gravity, and a seated pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
There are five more crew members on the Type S Scout/Courier: Doc, Jade, Marshal, Nat and Calvin. Check them out!
The figures are sculpted by Papsikels and Kyoushuneko Miniatures.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Transport Delta Asymmetric Variant Upgrade
Modify your Transport Delta to integrate this Asymmetric Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- AirlockDoor_A.stl
- AirlockDoor_IA.stl
- Asymmetric Curved Bottom.stl
- Asymmetric Curved Floor.stl
- Asymmetric Curved Top.stl
- IA_1x_Airlock.stl
- Transport - Asymmetric Variant - Dorsal Bridge Airlock.stl
- Transport - Asymmetric Variant - Dorsal Side Bridge + Section 1.1.stl
- Transport - Asymmetric Variant - Dorsal Side Bridge + Section.stl
- Transport - Asymmetric Variant - Dorsal Side Bridge Section Extension 1.1.stl
- Transport - Asymmetric Variant - Dorsal Side Bridge Section Extension.stl
- Transport - Asymmetric Variant - Dorsal Side Bridge T Section 1.1.stl
- Transport - Asymmetric Variant - Dorsal Side Bridge T Section.stl
- Transport - Asymmetric Variant - Ventral Bridge Airlock.stl
- Transport - Asymmetric Variant - Ventral Side Bridge + Section 1.1.stl
- Transport - Asymmetric Variant - Ventral Side Bridge Section Extension 1.1.stl
- Transport - Asymmetric Variant - Ventral Side Bridge Section Extension.stl
- Transport - Asymmetric Variant - Ventral Side Bridge T Section (mirrored).stl
- Transport - Asymmetric Variant - Ventral Side Bridge T Section 1.1.stl
- Transport - Asymmetric Variant - Ventral Side Bridge T Section.stl
Wolfram AH-222G Scorpion Gunship
The AH-222G Scorpion is Wolfram's attempt to correct the issues of the Stinger. It sports a heavier two-man cockpit and larger fan blades to carry heavy weapons systems to operate in a military role.
In total, it packs two Venom missile pods with eight missiles each, eight missiles on underwing racks, two rocket pods, and a 6-barrel rotary cannon.
The missiles are detachable and the fan blades rotate. In addition, the cockpit canopy can be opened.
Scout Crew Zero-G Pack Miniatures
Meet Nat, Asha, Marshal, Jade and Doc, the Scout Crew. The 28mm figures are sculpted by Papsikels and Kyoushuneko Miniatures and in this package they are in zero-G. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
They also comes in four other different poses: standing at ease, lying down, seated, and an action pose. Check them out!
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Transport Delta Upper Deck Variant Upgrade
Modify your Transport Delta to integrate this Upper Deck Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Transport - Upper Deck - Forward Viewport.stl
- Transport - Upper Deck - Upper Hull - Left Side - Midsection.stl
- Transport - Upper Deck - Upper Hull - Right Side - Midsection.stl
- Transport - Upper Deck - Upper Hull - Shield Generator.stl
ASF-09AS Firefly S.W.A.R.M. Starfighter
The ASF-09A Firefly was inadequate at fighting against the Remnant forces, particularly in space. Consequently, Hades Aerospace determined that the Firefly platform could be modified to carry additional armaments by sacrificing speed and manoeuvrability. This led to the development of the S.W.A.R.M. system or Space Weapons Augmentation Refactor Mounting.
This weapons package adds an additional pair of particle cannons, reinforces the cockpit and mounts a total of 20 missiles.
Scout Crew Lying Down Pack Miniatures
Meet Nat, Jade, Marshal, Doc and Asha, the Scout Crew. The 28mm figures are sculpted by Papsikels and Kyoushuneko Miniatures and in this package they are lying down. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
They also comes in four other different poses: standing at ease, seated, zero gravity, and an action pose. Check them out!
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Transport Delta Gunship Variant Upgrade
Modify your Transport Delta to integrate this Gunship Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Transport - Gunship Variant - Lower Hull - Left Side - Centre.stl
- Transport - Gunship Variant - Lower Hull - Right Side - Centre.stl
- Transport - Gunship Variant - Side Hull - Right Side - Turret Ring.stl
- Transport - Gunship Variant - Upper Hull - Upper Turret.stl
- Transport - Lower Hull - Right Side - Centre.stl
30-ton Ship's Boat Passenger Cabin
This cabin is especially made for the Traveller small craft 30-ton Ship's Boat. The cabin is designed to make it easy to reconstruct your ship into a passenger vessel.
The standard 30-Ton Ship's Boat is a versatile ship used for a wide range of missions such as transporting passengers and cargo across a star system. It is often seen operating from larger vessels or as boarding craft in smaller militaries.
The Ship's Boat is not included but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Converging Beam Cannons
Energy beam weapons compatible with our starfighters and some of our turret designs.
Scout Crew Action Pack Miniatures
Meet Nat, Asha, Marshal, Doc and Jade, the Scout Crew. The 28mm figures are sculpted by Papsikels and Kyoushuneko Miniatures and in this package they are in action pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
They also comes in four other different poses: standing at ease, lying down, zero gravity, and a seated pose. Check them out!
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Scout Ship Beta Airlock Variant Upgrade
Current version: 1.1
Modify your Scout Ship Beta to integrate this Airlock Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hull - Side Airlock - Dorsal Forward Turret - Double Sided.stl
- Hull - Side Airlock - Dorsal Forward Turret.stl
- Hull - Side Airlock - Ventral Reverse Thrusters - Double Sided.stl
- Hull - Side Airlock - Ventral Reverse Thrusters.stl
- Side Airlock - Door.stl
28mm Ground Crew Drivers
A driver in spacesuit and without helmet suitable for use with our other ground crew figures and other scifi ships and terrain. Sculpted by Kyoushuneko Miniatures.
Scout Crew Seated Pack Miniatures
Meet Asha, Jade Doc, Marshal and Nat, the Scout Crew. The 28mm figures are sculpted by Papsikels and Kyoushuneko Miniatures and in this package they are sitting. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
They also comes in four other different poses: standing at ease, lying down, zero gravity, and an action pose. Check them out!
Important! The chair is not included in the package!
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Scout Ship Beta Missile Variant Upgrade
Current version: 1.2
Modify your Scout Ship Beta to integrate this Missile Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hull - Scout Ship - Missile Variant - Dorsal Housing Left Side.stl
- Hull - Scout Ship - Missile Variant - Dorsal Housing Right Side.stl
- Hull - Scout Ship - Missile Variant - Dorsal Midsection.stl
- Hull - Scout Ship - Missile Variant - Launch Tubes.stl
- I Internal Missile Tube.stl
- Internal Missile.stl
Alien Merchants - Weapon Dealers
Add two alien merchants, two new missile types, cases, and an energy weapon to your haul, all thanks to xenobiologist extraordinaire, That Blasted Samophlange! Be sure to check out his Tribes here and Store here.
Scout Crew Standing Pack Miniatures
Meet Marshal, Jade, Nat, Asha and Doc, the Scout Crew. The 28mm figures are sculpted by Papsikels and Kyoushuneko Miniatures and in this package they are standing at ease. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
They also comes in four other different poses: seated, lying down, zero gravity, and an action pose. Check them out!
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Scout Ship Beta Gunboat Variant Upgrade
Modify Scout Ship Beta to integrate this Gunboat Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hull - Gun Boat - Dorsal Left Side Rear Turret.stl
- Hull - Gun Boat - Dorsal Right Side Rear Turret.stl
- Large Gun Barrel.stl
- Large Turret Bottom.stl
- Large Turret Ring.stl
- Large Turret Top.stl
Grav Sled
Games ART by Philipp does some very cool starships quite similar in scope to our vessels. We even have a shared turret system, meaning Games ART by Philipp turrets are compatible with ours and vice versa!
Philip has offered us this grav sled as a bonus item. It will fit nicely alongside our set dressing for our outpost, or if you are a starship fan, in the cargo bay of one of our ships (or Philipps own for that matter)!
Philipp has just launched his brand new Tribes on MyMiniFactory! Thank him by being one of the first to support him, or check out his recent Kickstarter, the Brick!
Scout Crew Pack
Meet Marshall, Jade, Nat, Asha and Doc, the Scout Crew. Sculpted by Papsikels and Kyoushuneko Miniatures, each 28mm figure comes in five different poses: standing at ease, seated, lying down, zero gravity, and an action pose. The miniatures can easily be scaled up to 32 or 35mm, and both presupported and support-free versions are provided.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Scout Ship Beta Civilian Variant Upgrade
Modify Scout Ship Beta to integrate this Civilian Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Scout Ship - Civilian Variant - Dorsal Front Section - Windows.stl
- Scout Ship - Civilian Variant - Dorsal Front Section.stl
- Scout Ship - Civilian Variant - Dorsal Left Side.stl
- Scout Ship - Civilian Variant - Dorsal Right Side.stl
- Scout Ship - Civilian Variant - Upper Deck Ceiling - Windows.stl
- Scout Ship - Civilian Variant - Upper Deck Ceiling.stl
- Scout Ship - Civilian Variant - Upper Deck Rear Wall.stl
40-Ton Pinnace Passenger Cabin
This cabin is especially made for the Traveller small craft 40-ton Pinnace. The cabin is designed to replace the cargo area and make it easy to rebuild your ship into a full passenger vessel.
The standard 40-Ton Pinnace is a fast ship, it can move a fair amount of cargo and has some room for passengers and is often used for extended missions as an auxiliary vessel for a larger military or exploration ship. The 40-ton Pinnace is not included in this package but can be found here.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Elite Mercenary
Papsikels has provided this awesome cyberpunk mercenary to Operation Maelstrom as a cross-promotion.
Be sure to check out his frontier here for more awesome miniatures!
28mm Landing Shuttle
Currently Available for Free by joining our Tribe.
This shuttle in 28mm is assembled gluelessly with custom OpenLOCK clips. Originally created for our Starfighters II pack that featured in our Sleipnir Kickstarter, the shuttle is modular and compatible with the Starfighter series of 28 mm small craft.
Assembly is straight forward and intuitive. Contains 25 unique STL files.
Painted by David Woods/DW Artist.
Scout Ship Beta Stretch Variant Upgrade
Modify Scout Ship Beta to integrate this Stretch Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hull - Stretch Variant - Dorsal - Forward Airlock.stl
- Hull - Stretch Variant - Dorsal - Hull Extender.stl
- Hull - Stretch Variant - Dorsal - Midsection.stl
- Hull - Stretch Variant - Ventral - Forward Landing Gear.stl
- Hull - Stretch Variant - Ventral - Hull Extender.stl
- Hull - Stretch Variant - Ventral - Midsection.stl
- Hull - Stretch-Cargo Variant - Ventral - Forward Cargo Area.stl
- I Turret Ladder Well - Floor.stl
Utility Box Droids
Our ground crew expert, Kyoushuneko, has sponsored week 3's awesome stretch goal, Utility Box Droids. Add these cute little helpers to your haul, and don't forget to visit Kyoushuneko on Patreon or MyMiniFactory.com.
Best of Starship I & II
This best of pack includes a variety of our most popular items from Starship I and Starship II.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Spacesuit Locker
Power Loader
Lockers (based and unbased)
Hangar Taxi
Missiles (three variants and two missile trolleys)
Cryo Chambers (based and unbased, standing and horizontal variants)
Machinery (4 variants, based and unbased, including water pumps, generators and servers)
Scout Ship Beta Patrol Variant Upgrade
Version: 1.1 - Two new STL-files
Modify Scout Ship Beta to integrate this Patrol Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hull - Patrol Boat - Clip Turret Hard Point.stl
- Hull - Patrol Boat - Dorsal Left Side Rear Turret.stl
- Hull - Patrol Boat - Dorsal Right Side Rear Turret.stl
- Hull - Patrol Boat - Ventral Bridge Nose Turret Port.stl
- Hull - Patrol Boat - Ventral Left Side Cargo Bay.stl
- Hull - Patrol Boat - Ventral Right Side Cargo Bay.stl
- Single Auto Turret.stl
- Triple Laser.stl
Rocket Pods
Four rocket pods compatible with our Operation Maelstrom starfighters and aerospace vehicles, as well as the Arrow MKII and Starfire MKII. Includes a short range missile.
T5 Turrets
Get a collection of turret variants from Traveller 5 (T5) usable on your Type S Scout/Courier or any standard 2nd Dynasty turret port for our 28mm scale line of ships.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
You find our ships here: Type S Scout/Courier, Sleipnir, Chimera, Pathfinder, Cerberus, Transport Delta, Scout Ship Beta and Shuttle Alpha.
This package includes 28mm T5 Turrets STL Files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Scout Ship Beta Cargo Variant Upgrade
Modify Scout Ship Beta to integrate this Cargo Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hull - Scout Ship - Cargo Variant - Cargo Bay Front - Left Side.stl
- Hull - Scout Ship - Cargo Variant - Cargo Bay Front - Right Side.stl
- Hull - Scout Ship - Cargo Variant - Cargo Bay Rear - Left Side.stl
- Hull - Scout Ship - Cargo Variant - Cargo Bay Rear - Right Side.stl
- Hull - Scout Ship - Cargo Variant - Central Crawlspace Access.stl
- Hull - Scout Ship - Cargo Variant - Ventral Forward Landing Gear Crawlspace.stl
Missile Racks
A collection of support free missile racks and pylons compatible with our Operation Maelstrom starfighters and aerospace vehicles, as well as the Arrow MKII and Starfire MKII. Includes a short range missile.
Cargo Containers
Expand your Starship deck plans with these cargo containers, suitable for use with 28mm miniatures. Includes standard and sealed containers, containers with controlled environment, ordinary and reinforced crates, all with lids and in different sizes. Also included are gas canisters, open frame crates and liquid containers.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
This package includes 28mm Cargo Container STL Files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Space Shuttle Alpha Twin Engine Variant Upgrade
Modify Space Shuttle Alpha to integrate this Twin Engine Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle - Twin Engine Variant - Engine Front Left.stl
- Shuttle - Twin Engine Variant - Engine Front Right.stl
- Shuttle - Twin Engine Variant - Engine Rear.stl
28mm Pilot Miniatures in Saluting Poses
Sized to be seated in any of our starfighter cockpits or starship chairs, these four pilot variants include a male and female fighter pilot saluting, both with and without a helmet.
Sculpted by Koni Machado.
Snub Nose - Type S Scout/Courier Upgrade
Change the look of your Type S Scout/Courier by replacing the bow with one of two alternative pieces. The Snub Nose will work with the 28mm Type J Seeker too.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
The Type S Scout/Courier is a spaceship that travels the Traveller Tabletop Universe. It is a fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display.
The Type S Scout/Courier is detailed inside and out and we also offer a variety of configurations to the ship. Compatible with the OpenLOCK system created by and available at Printable Scenery.
This package includes two 28mm snub nose STL Files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Space Shuttle Alpha Missile Variant Upgrade
Modify Space Shuttle Alpha to integrate this Missile Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Medium Missile 1.1.stl
- S Internal Missile Wrack.stl
- Shuttle - Missile Variant - Missile Slots.stl
28mm Pilot Miniatures in Action Poses
Whether it be after crash-landing in hostile territory or fighting hostiles while trying to get to their birds, sometimes starfighter pilots need to defend themselves.
Sculpted by Koni Machado, this product includes four miniature variants of our male and female pilots armed with a sidearm. Has variants both with and without a helmet.
Variant Landing Gears - Type S Scout/Courier Upgrade
Configurate your Type S Scout/Courier with these two non-articulated landing gear variations; wheeled and landing strut. The Variant Landing Gears will work with the 28mm Type J Seeker too.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
The Type S Scout/Courier is a spaceship that travels the Traveller Tabletop Universe. It is a fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display.
The Type S Scout/Courier is detailed inside and out and we also offer a variety of configurations to the ship. Compatible with the OpenLOCK system created by and available at Printable Scenery.
This package includes 28mm variant landing gears STL Files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Space Shuttle Alpha Turret Variant Upgrade
Modify Space Shuttle Alpha to integrate this Turret Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Scout Ship Turret Barrel.stl
- Scout Ship Turret Bottom.stl
- Scout Ship Turret Top Full.stl
- Shuttle - Turret Variant - Turret Housing.stl
- Turret Ring 1.2.stl
Posable Stand for 28mm Starfighters
This multi-part stand allows one of our Starfighters to be attached and posed. Allows four points of articulation allowing the fighter or aerospace craft to be directed in a variety of ways.
Compatible with Operation Maelstrom aerospace craft, Arrow MKII and Starfire MKII.
Engine Cone Variants for Traveller Starships
These engine cones offers several manoeuvre drive alternatives for your Type S Scout/Courier, Type J Seeker, or Free Trader Beowulf, including some classic looks.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
The Type S Scout/Courier is a spaceship that travels the Traveller Tabletop Universe. It is a fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display.
The Type S Scout/Courier is detailed inside and out and we also offer a variety of configurations to the ship. Compatible with the OpenLOCK system created by and available at Printable Scenery.
In the Traveller Tabletop Universe the Type J Seeker is a rebuilt Type S Scout/Courier. The Type J Seeker is usually converted to a mining ship but they are also known to be used in illicit circumstances.
The Seeker is a fully 3D-printable spaceship scaled for 28mm (1:59) play in your favourite Tabletop RPG, Wargame or for display. The Type J Seeker is highly detailed inside and out. Compatible with the OpenLOCK system created by and available at Printable Scenery.
This package includes 28mm Engine Cone STL Files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Space Shuttle Alpha Warp Variant Upgrade
Modify Space Shuttle Alpha to integrate this Warp Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle - Warp Variant - Bulb.stl
- Shuttle - Warp Variant - Left Nacelle.stl
- Shuttle - Warp Variant - Rear Dorsal Fuselage.stl
- Shuttle - Warp Variant - Right Nacelle.stl
Gaeru Zalg Alien Starfighter
Invaders... is an inaccurate word, since the Sesh Empire owned these parts about a million years ago. Of course, they are all dead now, but unfortunately, their Remnant War Clones never got the memo. There are too many automated factories making ships and clones out there in the galaxy to get rid of them all. Lucky their starships never venture into inner system, they send patrols regularly and they attack mindlessly on sight.
The two most common variants we encounter are the Gaeru Barth and the Gaeru Zalg. They are built to last, simple to manufacture, and brute force their way through the battlefield.
The real nasty is the Gaeru Zalg. They handle even worse than the Barth's in an atmosphere, but they have an oversized energy cannon. Fortunately, they have to charge up to be used, but it's a one hit, one kill sort of weapon, and they can do serious damage even to capital vessels. Unfortunately, they still have half the missiles of a Barth on top of that.
Air Raft Variants
With these flying vehicles, your crew will travel planet side in style. The package includes a base two-seater Air Raft and a four seater and tray back options with a Saloon, Coupe and Pickup variant.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints.
This package includes 28mm Air Raft Variants STL files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Space Shuttle Alpha Bus Variant Upgrade
Modify Space Shuttle Alpha to integrate this Bus Variant. Now includes parts to make compatible with the Shuttle Alpha MKIIIB. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle - Bus Variant - Forward Left Wing.stl
- Shuttle - Bus Variant - Forward Right Wing.stl
- Shuttle - Bus Variant - Lower Central Fuselage Extension.stl
- Shuttle - Bus Variant - Upper Central Fuselage Extension.stl
- Shuttle - Bus Variant - Upper cockpit Fuselage.stl
- Alpha MKIIIB - Fuselage - Forward - Nose - Top - Extended Hull.stl
- Alpha MKIIIB-MKIV - Fuselage - Cabin Extension - Bottom.stl
- Alpha MKIIIB-MKIV - Fuselage - Cabin Extension - Top.stl
Lamprey Pirate Breaching Pod
Originally created as a Salvage and Recovery Vehicle, the Spidercrab is a utility craft used in a wide variety of operations from starship repair, maintenance, tug duties, search and rescue, and shipbreaking. It's powerful engines can be used to push larger vessels, and its four articulated arms can be used both for tearing metal, or magnetically securing to large objects, such as a hull.
This versatility has led some rather unscrupulous owners to make some modifications to the Spidercrab platform.
Known as the Breacher or Pirate Breaching Pod, a common aftermarket modification is to replace the rear of the cab with a hull saw and mount a PDC on the top for offensive capabilities. Although not designed for combat, the heavy duty construction makes it surprisingly durable in a fight.
While a single Breaching Pod is not so effective on its own, in a swarm the illegal craft can be frightening.
PRINT FEATURES: Both the Spidercrab and Pirate Breaching Pod feature fully articulated engines, engine blocks, arms, claws and manipulators. The FDM print version has full functionality, while the SLA version has fewer parts and lacks the flexibility of the FDM/PLA version. This is because resin is brittle, and the mechanics will break quickly.
Type S Scout /Courier
Latest Version: 1.2 - Added new static landing gear and clip fixes
The Type S Scout/Courier is an iconic starship from the Traveller Tabletop Universe. It is a fully 3D-printable spaceship scaled for 28mm (1:59) play in your favourite Tabletop RPG, Wargame or for display. The Type S Scout/Courier is highly detailed inside and out. Compatible with the OpenLOCK system created by and available at Printable Scenery.
We also offer a variety of alternative configurations for the ship, such as variant landing gear, engine cones and snub noses, with more options added all the time.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the ship.
Type S Scout/Courier contains of approximately 170 parts.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Space Shuttle Alpha Winged Variant Upgrade
Modify Space Shuttle Alpha to integrate this Winged Variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle - Winged Variant - Forward Left Wing.stl
Shuttle - Winged Variant - Forward Right Wing.stl
Shuttle - Winged Variant - Rear Left Wing.stl
Shuttle - Winged Variant - Rear Right Wing.stl
ASF-09S Astrofire Starfighter
Created by Hades Aerospace, the ASF-09A Firefly and ASF-09S Astrofire are lightly armed tactical aerospace fighters used as frontier patrol craft and interceptors often assigned to forward outposts across the galaxy. Featuring powerful 3D vectored thrusters and RCS, the platform is designed for speed and manoeuvrability.
The Firefly is designed specifically for atmospheric operations with variable wing configurations, whilst the Astrofire is focused around space operations, although it can operate in a planetary theatre, albeit with less manoeuvrability.
Features movable enging nozzles, a retractable tail fin, and openable canopy.
Traveller Starship Miniatures Stretch Goals
These are the stretch goals unlocked during our Traveller Starship Miniatures Campaign. Each has a 1:270 version and a Tactical version, including versions for FDM prints or SLA prints (including supports).
Vessels Included:
- Type A2 Far Trader
- Type E Corvette
- Type R Subsidized Merchant
- Type SD Dragon System Defence Boat
- Type K Safari
- Type GE Gunned Escort
- Type L Laboratory Ship
- Armed Packet
- Gunned Escort Gig
- Type Y Yacht
- Hiver Explorer
- Donosev Science Ship
- Solomani Trader
- Ninz Zhodani Scout
- Type J Seeker
- Beta Centauri
- Type J Seeker (Murphy/2nd Dynasty Version)
- Type S Scout with Winglets and Snub Nose (Murphy/2nd Dynasty Version)
- Pinnace
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Starship III: Common Stretch Goals
CURRENT VERSION: 1.4.6
Additional Starship III Common Stretch Goals:
- Boarding Tube
- Bonus Items
- Hard Points
- Medbay
- Revised Tactical Miniatures
- Tactical Miniatures (in 1:270 scale and 1 inch hex scale)
- Variant Miniatures I (in same scales as above)
- Workshop
Wolfram HI-223 Hornet Interceptor
The HI-223 Hornet Interceptor is Wolfram's light enclosed rotor offering, which provides a lighter frame suitable for police operations. It actually started life as a combat drone variant, but was repurposed as a standard patrol aircraft popular with law enforcement. It mounts a single 20mm rotary cannon under its nose, which can be switched out for spotlights or non-lethal weaponry for crowd control missions.
Includes glueless assembly, detailed cockpit, rotating rotor blades, movable gun and openable canopy. Perfect for any cyberpunk or near future setting or science fiction setting.
Traveller Starship Miniatures
The star of this campaign is our brand new official Traveller Starship Miniatures. The initial release includes a total of 14 starships, seven each in two different scales. The ships, which featured most prominently in the Traveller5 Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to use two scales.
The first, 1:270 scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is Tactical scale, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The core ships feature a variety of popular classic Traveller designs, all originally visualised by Ian Stead, aside from our own Murphy-class Type S Scout/Courier (both versions of the Type S have been provided for collectors). From merchant vessels to system patrol boats and mercenary cruisers, they range in size from 100 to 800 tons (as per the Traveller rules).
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Best of Starship I & II
This best of pack includes a variety of our most popular items from Starship I and Starship II.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Spacesuit Locker
Power Loader
Lockers (based and unbased)
Hangar Taxi
Missiles (three variants and two missile trolleys)
Cryo Chambers (based and unbased, standing and horizontal variants)
Machinery (4 variants, based and unbased, including water pumps, generators and servers)
Shuttle Alpha MKIV Miniatures
Want to visualise ship to ship combat or print out a scale ship miniature that won't cost you an arm and a leg in plastic, nor weeks on the printer? Sometimes 28-mm is just too big, or maybe you are not even playing in that scale. These pint-sized vessels are for tactical combat or display and provide quick, easy prints of our Space Shuttle Alpha MKIV. The minis come in two scales: 1/270 (X-Wing scale) and tactical scale (fitting to a 1 inch hex base).
OpenLOCK clips are included.
Traveller Commercial License
USD 265.00
The Traveller Commercial License allows commercial printers to print and sell our licensed Traveller designs for a period of 1 year. During this time, any Traveller designs from 2nd Dynasty that you purchase may be printed and sold for profit. STL files may never be redistributed and sold however.
For additional licensing information, see 2nddynasty.com.
Collector IV Extras
Additional files to the Collector IV Pledge, not included elsewhere.
Modular Prefab Outpost
This 28mm outpost can be assembled in a wide variety of configurations and is ideal for temporary fortifications, outposts, airports, space bases, and any science fiction setting with outdoor environs.
Included is a variety of walls, landing pads, staircases, railings, and a gatehouse.
2nd Dynasty Turrets
This package includes 2nd Dynasty´s Turrets Pack I, II and III all rolled into one for some variety. These turret tiles, suitable for use with 28-32mm miniatures, are compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles. Together the three packages includes more than 45 STL Files.
Includes
- 28mm 2nd Dynasty Turrets STL Files
Starship Chimera Pathfinder STL Files
CURRENT VERSION: 1.0.9
Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:
NO STRETCH GOALS INCLUDED
This is Starship Chimera Pathfinder only!
INCLUDES:
- Starship Chimera Pathfinder STL Files
- Non-Commercial Printing License
Paint and customisation by Brian Jenkins
Flight Deck Accessories
This collection of ancillary vehicles, defences and structures can bring a flight deck, airfield or starport to life. Includes a personnel shuttle, fuel tanker, a portable satelite dish, portable missile launcher, a spotlight, a starfighter gantry, and portable ladder.
Modular Deckplans Collection
Create your own starship deckplans with these tiles from Starship I and II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
Includes
- 28mm Modular Deckplans Collection STL Files
Starship Chimera Stretch Goal STL Files
CURRENT VERSION: 1.3.2
28 Stretch Goals unlocked during Starshp IV.
Starship IV - Common Stretch Goals - Change Log
===============================================
14/10/2020
Version 1.1
- Added bonus parts to Chimera Plus and added shared parts with the Skinny so that everything is in one folder system.
18/08/2020
Version 1.0.9
- Closets and cabinet fixed in the state room - Closets - Standalone 1.2.stl and Cabinet - Standalone 1.1.stl.
- Added unbased servers - 1x1 - I - Server - Type II - Closed - Unbased.stl and 1x1 - I - Server - Type II - Open - Unbased.stl.
11/05/2020
Version 1.0.8
- Added Outer Hull - Chimera Plus - Forward Cargo Bay Hinge - 3 Inch 1.1.stl and Wide Nose Joint.stl to the Chimera Plus to fix an issue with the cargo bay hinge and add something to cover the gap with the wider doors.
24/04/2020
Version 1.0.7
- Added 3/4 modular bulkheads to Plus and Skinny for above the engines
22/04/2020
Version 1.0.6
- Added fix for triple bunks in the crew quarters
21/04/2020
Version 1.0.5
- Added new parts to accomodate the wider Chimera Plus, and middle deck bulkhead edges. Also, 3 inch wide ramp.
13/04/2020
Version 1.0.4
- Fixed separated monitors from Raised Bridge - Upper Bridge Nose.stl in the Raised Bridge stretch
- Added missing bulkhead for engine mounts for the Chimera Plus
09/04/2020
Version 1.0.3
- Put out a fix on the middle cargo bay parts for the Chimera Plus variant that had openlock ports placed incorrectly.
25/03/2020
Version 1.0.2
- Added parts to the Chimera Plus to allow for wider hangar bay bulkheads
12/03/2020
Version 1.0.1
- Added missing cargo ramp to Plus and Skinny variants
11/03/2020
Version 1.0
- Added the ghost ship files
- Production version
20/02/2020
Version 0.9.2
- Added missing angled to flat conversion piece to the Flat Top stretch goal
17/02/2020
Version 0.9.1
- Replaced the old large turret parts with the 1.1 versions; an older version was accidentally included. The newer one has thicker mountings and the clip ports align correctly.
14/02/2020
Version 0.9
- Added the rest of Third Class
07/02/2020
Version 0.8
- Added Third Class (window only)
- Added Hull Extenders
- Added Sandcrawler
- Added State Room
31/01/2020
Version 0.7
- Added Side Engines
- Added Crew Quarters
- Added Broadside Weapons
- Updated Landing Gear to include retracted models
- Updated VTOL Engines to include round engines
27/01/2020
Version 0.6.1
- Updated Manoeuvrability Pack variants to include separate RCS thruster versions and Pathfinder compatibility
- Updated Chimera Plus to include turret port compatibility
24/01/2020
Version 0.6
- Added Chimera Plus
- Added Cargo stretch
- Added Manoeuvrability Pack
- Updated Escape Pod for more compatability
- Updated Flat Top for Skinny compatability
20/01/2020
Version 0.5.1
- Added missing Forward airlock - airlock.stl
17/01/2020
Version 0.5
- Added Chimera Skinny
- Added Escape Pods
- Added Raised Bridge
Version 0.4
- Fixed airlock door to not jam
- Added
10/01/2020
Version 0.3
- Added Airlocks
- Added Computers
- Added Angled Underside
- Added this change log
28mm Ground Crew Miniatures
This pack contains 8 ground crew miniatures sculpted by Kyoushuneko Miniatures of science fiction flight deck crew or spaceport ground crew. Perfect for carrier operations, space bases, airports, air bases, and any situation be it civilian or military where a crew is needed for aerospace craft launching, retrieving or maintenance.
Includes 4 unique poses, with variants with and without space helmets: shooter pose, directing pose, mechanic kneeling pose, and signal pose.
Images of painted miniatures provided by MonCapitan.
Starfighter Modular System I & II
With Starfighter Modular Systems I & II you can make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures.
Starfighter I includes instructions to make the base variants Arrow, Basilisk and Lancer Starfighter as well as the Starfire Fighter.
Starfighter Pack II includes five base variants, and pictures of these. Instructions will be available at a later date.
Our two Starfighter-pack are compatible with each other to offer even more starfighter variants.
Includes
- 28mm Starfighter Modular System I & II STL Files
Turrets Pack IV
Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
28mm Starfighter Pilot Miniatures
28mm male and female starfighter pilots sculpted by Koni Machado. Includes presupported versions of each in four poses each, including three additional helmeted versions, for a total of 10 variations.
Images of painted miniatures provided by MonCapitan.
Sleipnir KS Edition
Current Version: 1.1.5
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and ready to take lighting in the engine and airlock room. Perfect for games such as Traveller, The Expanse, Starfinder or Stargrave. Instructions to build the base Sleipnir are included.
The Sleipnir KS Edition also includes the Stretch Goals from Starship V Sleipnir Kickstarter.
Includes
- 28mm Sleipnir Kickstarter Edition STL Files
Starfighter Modular System
Current version: 1.4 - Compatible with Operation Maelstrom
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package
Modular Control Tower
This prefab control tower was designed to be quickly assembled at forward outposts to provide air control services. It features a stackable stairwell, control room, solar panels, radar and satelite dishes.
Chimera Pegasus
Pegasus is a 28mm Chimera variant for transporting civilians from one planet to another. The ship has three decks and a full interior including sleeping pods, crew berths, table, control panels, kitchenette and chairs just to mention a small part of the STL-Files.
Includes
- 28mm Chimera Pegasus STL Files
Crew Miniatures II
Current version: 1.1 - 17/09/2020
This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Weapons Pack - Original Weapons TNG
This weapons pack includes a total of 22 variant weapons compatible with our weapon mount openlock clips. These are older designs that have been updated with greater detail and in a more compact format that makes the clip system less prominent.
Chimera Cerberus
Cerberus is a Chimera variant for patrolling the space lanes. Featuring nine gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantastic hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship includes more than 250 STL Files and is an impressive hobby project that will keep you busy for weeks. With a design aesthetic evoking WWII bombers and galaxies far, far away, the Cerberus includes a small cargo bay, landing ramps to quickly deploy troops, droid charging stations, a medbay, workshop, bridge, living quarters and galley.
Instructions to build Cerberus are included.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Includes
- 28mm Chimera Cerberus STL Files
- Assembly Instructions PDF
Long Transport Delta Variant
Current Version: 1.1.1
Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Weapons Pack - Missiles
This weapons pack uses our missile rack system to allow a variety of weapons attachments to the wings of our starfighters. Includes six variant mounts and twelve missile, bomb and launcher variants.
Chimera Pathfinder
The Starship Chimera Pathfinder is a smaller, distinct deep space exploration ship. It is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. The Chimera Pathfinder is detailed inside and out and a variety of configurations can be used to customise the deck plans.
Chimera Pathfinder contains approximately 260 parts and more than 70 unique parts.
It has a fully detailed interior and compatibility with other Chimera parts, but with one important caveat:
No Stretch Goals included. This is Starship Chimera Pathfinder only.
INCLUDES:
- Starship Chimera Pathfinder STL Files
- Non-Commercial Printing License
Hammerhead Scout Variant
Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.
Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.
Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Weapons Pack - Cannons
This weapons pack adds 15 new guns, five variants, with three sizes each. Includes laser cannons, particle cannons, pumped lasers, and rotary cannons/Gatling guns.
Chimera KS Edition
The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds.
The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display.
Chimera contains approximately 400 parts and more than 100 unique parts.
Chimera KS Edition Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Includes
- 28mm Chimera Kickstarter Edition STL Files
Gantry Pack
Current Version: 1.1 - 16/09/2020
Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Globiol
The Globiol is an embarking personal ship from a cruise line and made for luxurious exploration of the galaxy!
Designed to allow two people and a pilot to go down to the planet, this light weight ship features panoramic windows, ample leg room, space for your belongings, and a cup holder for each guest! Want to try your hand at driving it? With our simple two joystick operation it flies with ease. And thanks to the anemic engines and computer aided mode, even your teens can take a turn as pilot.
Get into trouble? No worries! With the slow speed, lack of weapons, and expensive materials onboard, we are sure nothing can go possibly wrong! All Globiols constantly emit their location in public air space to allow easy tracking and discoverability, so we can find the wreckage later.
This 28mm ship prints nearly without supports. With the landing gear needing some support. It also has multiple points of articulation.
- Engines Rotate
- Captains Chair Rotates
- Landing Gear Rotate
- Seats Fold Down
- Door Slides out, Rotates Down
- Extending Ramp built into Door
Transport Delta KS Edition
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Two massive engines will get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
The Transport Delta contains over 80 parts and is detailed inside and out. A variety of configurations can be used to customise the deck plans.
Includes all Transport Delta-related stretch goals from Starship III Kickstarter: Asymmetric, Big Gun, Gunship, Saucer, Upper Deck and Upper Cockpit Variants. Also including the Long Transport Delta Variant from Starship IV.
Includes
- 28mm Transport Delta Kickstarter Edition STL Files
Turrets Pack III
Expand your Starship deck plans with these Turrets pack III tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Airlock Turret.stl
Drone Chicken Legs.stl
Drone Head.stl
Drone Quad Legs.stl
I Internal Drone Tube.stl
Radar Array Turret.stl
Radar Dish Turret.stl
Spotlight Turret.stl
Wolfram AHI-223D Parasite Drone
The Wolfram AHI-223D Parasite Drone is a militarised version of the civilian HI-223 Police Interceptor designed for urban operations against cyborgs, robots and other highly armoured hostiles.
The Parasite Drone was made as a bonus item for our Operation Maelstrom Kickstarter Campaign in collaboration with Kyoushuneko Miniatures and Papsikels.
View the campaign here. Also consider supporting us on Tribes or purchase other items through our Store.
Join our Newsletter to stay up to date on the latest releases and behind the scenes work in progress. Join us on our discord to interact with us.
Scout Ship Beta KS Edition
Explore deep space and final frontiers with this full 28mm scale scout ship. The base ship Scout Ship Beta Includes two manned turrets, a full sensor suite package, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge. The ship contains over 50 pieces.
The interior is modular – customise the layout however you like using our other Starship or compatible tiles.
The scout Ship Beta KS Edition includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter: Airlock, Cargo, Civilian, Gunboat, Missile, Patrol and Stretch Variants. Also including the Hammerhead Scout Variant from Starship IV Kickstarter.
Includes
- 28mm Scout Ship Beta Kickstarter Edition STL Files
Turrets Pack II
Expand your Starship deck plans with these turrets pack II tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Laser Lens Turret (Larger).stl
Double Laser Lens Turret.stl
Gun Turret Type 1.stl
Gun Turret Type 2.stl
Missile Turret Base.stl
Missile Turret Rack.stl
Scout Ship Turret Barrel.stl
Single Laser Lens Turret (Larger).stl
Single Laser Lens Turret.stl
Single Laser Lens Type 2 Turret.stl
Single Laser Lens Type 3.stl
Triple Laser Lens Turret (Larger).stl
Triple Laser Lens Turret.stl
Epsilon Bomber
Welcome, spacefarers, to the cutting-edge world of intergalactic warfare! Prepare to take your tabletop battles to a galaxy far, far away with our extraordinary Epsilon Bomber star fighter.
With its sleek and unmistakable design reminiscent of a certain iconic starship, the Epsilon Bomber is ready to soar into battle. Measuring a formidable 16 cm wide, 24 cm long, and 6 cm tall, this star fighter demands attention on the gaming table. Its attention to detail will leave even the most discerning pilots in awe.
The Epsilon Bomber is more than just a stunning model; it's a masterpiece of functionality. The articulated cockpit canopy adds an extra layer of realism as it smoothly rotates up, allowing your pilots to make their grand entrances. And just like the stars twinkling in the night sky, the radar spins with precision, scanning the vast expanse of space.
But that's not all—the Epsilon Bomber comes equipped with an arsenal of destruction. It boasts not one, but nine detachable bombs, ready to rain chaos upon your adversaries. With two distinct bomb types included, you'll have the tactical advantage to dominate the battlefield. Whether you prefer a delicate "whisper" or a thunderous "boom," the choice is yours.
When it comes to printing, we've made it easy for you. The Epsilon Bomber prints support-free, ensuring a smooth and hassle-free experience. The only area that requires support is the canopy, but trust us, it's worth it for that perfect fit and finish.
So, pilot, are you ready to embark on a cosmic adventure? Step into the cockpit, fire up your imagination, and prepare to dominate the stars with the Epsilon Bomber.
Shuttle Alpha KS Edition
The Shuttle Alpha is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
The interior is modular – customise the layout however you like using our other 2nd Dynasty Starship tiles or compatible tiles.
Contains over 50 pieces and there are alternate parts for large and small print beds. There are also high and low detail versions.
This Kickstarter Edition contains the Shuttle Alpha stretch goals from Starship III Kickstarter which means you can modify your Alpha with seven different variants: Winged, Bus, Warp, Turret, Missile, Twin Engine and Mobile Home Variant .
Includes
- 28mm Shuttle Alpha Kickstarter Edition STL Files
Turrets Pack I
CURRENT VERSION: 1.1
Expand your Starship deck plans with these turret tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- cannon_launcher_turret_base.stl
cannon_launcher_turret_bottom.stl
cannon_launcher_turret_top.stl
Rotary Laser Lens Turret 1.1.stl
Rotary Laser Lens Turret.stl
Single Auto Turret.stl
Twin Auto Turret 1.1.stl
Twin Auto Turret.stl
Twin Manned Turret 1.1.stl
Twin Manned Turret.stl
Single Beam Cannon.stl
Single Cannon.stl
Single Laser.stl
Triple Laser.stl
Double Beam Cannon Left.stl
Double Beam Cannon Right.stl
Quad Cannon.stl
Single Cannon.stl
Single Laser.stl
Triple Cannon Left.stl
Triple Cannon Right.stl
Double Beam Cannon Clip Opposite.stl
Double Beam Cannon Clip.stl
Laser Cannon Clip.stl
Quad Cannon Clip.stl
Single Cannon Clip.stl
Single Cannon Variant Clip.stl
Single Laser Clip.stl
Triple Cannon Clip.stl
Triple Cannon Large Clip.stl
Minotaur APC
Are you tired of your miniatures trudging along the battlefield at a snail's pace? Well, fret no more! Behold the mighty Minotaur APC, the embodiment of strength and brute force!
In Greek mythology, the Minotaur was a fearsome creature, and our Minotaur APC lives up to that legacy. This 3D printable vehicle charges through the battlefield just like its mythological counterpart, leaving your opponents scrambling to get out of its way. With 24 meticulously designed STL files, this beast is ready to tear up your tabletop.
At 28 mm scale, the Minotaur is perfect for FDM printing and can easily be scaled upwards. Its interior can accommodate up to 12 infantry and a driver. It moves smoothly via articulated wheels and the top-mounted turret can turn, allowing for dynamic gameplay.
All parts print without supports and use OpenLock clips to assemble together gluelessly.
2nd Dynasty Miniatures
This package includes STL Files for 65 character miniatures, both presupported and non-supported, from the 2nd Dynasty's catalogue:
Vacuum Loader Mech
Scout Crew Miniatures
Base Sleipnir Crew
Sleipnir Crew Stretch Goals
Vacuum Suits
Includes
- 28mm 2nd Dynasty Miniatures Collection STL Files
Transport Delta Kickstarter Edition
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
- The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Also includes all Transport Delta-related stretch goals from Starship III Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Captain Ben 28mm Miniature - Seated
Captain Ben is back with a Tribes Exclusive Miniature, now seated and ready to go!
Designed for 28mm scale and fits in our captains chair, let Ben lead the way.
Traveller 28mm Character Miniatures
Get more than 60 Traveller figures at 28mm scale. Includes a rag-tag crew in a variety of action, standing, seated, zero-gravity and reclined poses, as well as a mercenary, TL15 Star Marine, male and female Aslan, a hiver in five poses, vacc suits and twenty vargr soldiers and bandits.
Includes
- 28mm Traveller Character Miniatures STL Files
Starship III Core Pledge
Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!
Starship III Core Pledge includes three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. The ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship III Core Pledge corresponds the All-In Pledge in the Starship III Kickstarter. For more details, follow this link:
Pick Up Rover
This 28mm scale rover has room for a driver and three passengers, as well as a tray-back (be careful, the tray may be hot!) for transporting cargo loads. Included is a tool box insert and some presurised canisters if you feel the tray is looking a bit empty. The treaded wheels allow gentle movement over all but the roughest terrain, although are easily foiled by large rocks.
28mm T5 Turrets
Get a collection of turret variants from Traveller 5 (T5) usable on your Type S or any standard 2nd Dynasty turret port for our 28mm scale line of ships.
Starship II Core Pledge
Create your own starship deckplans with these tiles from Starship II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship II Core Pledge corresponds the Lieutenant Pledge in the Starship II Kickstarter. For more details, follow this link:
Captain Ben 28mm Miniature
This abomination is something the community asked for, I promise. John made it... or Benjaminen, manipulating the husk formerly known as John.
Imperial Star Marines in Battledress Official 28mm Traveller Figures
A selection of 6 Offiicial Traveller 28mm scale Imperial Star Marines wearing TL15 battledress, including a marine suiting up.
Includes
- Imperial Star Marines in Battledress STL Files
Starship I Core Pledge
Current Version: 1.1 (13/07/2020) Gunship - Turret 1.1.stl update
Create your own starship deckplans with these tiles from Starship I Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship I Core Pledge corresponds the Commander Pledge in the Starship I Kickstarter. For more details, follow this link:
Landing Pad
An 8 × 8 inch (12 × 12 metre at 28mm scale) landing pad that assemblees gluelessly using the OpenLOCK system.
28mm Air Raft Variants
Three air raft variants in 28mm scale.
Includes:
- 28mm Air Raft Variants STL Files
Space Shuttle Alpha Kickstarter Edition
Version: 2.6.5 - 28/10/2021
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds
High and low detail versions
Contains over 50 pieces
Low support requirements
Create your own full scale printable 3D shuttle craft, with modular interior and cutaway structure!
Also includes all Space Shuttle Alpha-related stretch goals from Starship III Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Captain Freja In Zero-G
Fly fly away! Captain Freja is well suited to protect our starship fleet which includes Scout Ship Beta, Transport Delta, Space Shuttle Alpha, Chimera, Chimera Pathfinder, Cerberus, Pegasus and Odyssey.
In this package Freja is in a action position. She is also available in a standing, seated, lying down and zero-g position. Expand her crew by adding engineer Bessie to the roster to keep those engines fine tuned and give it all she's got.
The captain was commissioned by 2nd Dynasty and sculpted by Papsikels. The miniature is provided both presupported and supportfree in 28mm scale but are easily scaled to 32mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures.
This package includes:
Captain Freja in Zero-G, both presupported and supportfree
28mm Beta Centauri (Scout Beta Upgrade)
A 28 mm scale conversion of our Scout Ship Beta design to the Traveller Universe, includes bridge, state rooms, galley, air raft garage, cargo bay, and drive compartment with jump drives, manoeuvre drives and a power plant. This version only includes the instructions and new components. Requires the Scout Ship Beta base ship.
Includes
- 28mm Beta Centauri Upgrade STL Files
Security Pack
CURRENT VERSION: 1.1 - Security Scanner updated
Add security stations, brigs and prison cells to your starship deck plans!
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 18 high detail tiles, including:
- Size E and size I floor turrets, articulated
II Weapons lockers
Cell doors
Security doorway
Laser door
Security scanner
Security control pannel
Captain Freja Lying Down
Time to go to sleep! And probably Captain Freja dreams about our starship fleet which includes Scout Ship Beta, Transport Delta, Space Shuttle Alpha, Chimera, Chimera Pathfinder, Cerberus, Pegasus and Odyssey.
In this package Freja is in a lying down position. She is also available in a standing, seated, action and zero-g position. Expand her crew by adding engineer Bessie to the roster to keep those engines fine tuned and give it all she's got.
The captain was commissioned by 2nd Dynasty and sculpted by Papsikels. The miniature is provided both presupported and supportfree in 28mm scale but are easily scaled to 32mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures.
This package includes:
- Captain Freja lying down, both presupported and supportfree
28mm Beta Centauri
Scout Ship Beta Kickstarter Edition
CURRENT VERSION: 1.3.4
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Contains over 50 pieces
Minimal support requirements
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Also includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Captain Freja In Action
This is not a joke! Captain Freja is well suited to protect our starship fleet which includes Scout Ship Beta, Transport Delta, Space Shuttle Alpha, Chimera, Chimera Pathfinder, Cerberus, Pegasus and Odyssey.
In this package Freja is in a action position. She is also available in a standing, seated, lying down and zero-g position. Expand her crew by adding engineer Bessie to the roster to keep those engines fine tuned and give it all she's got.
The captain was commissioned by 2nd Dynasty and sculpted by Papsikels. The miniature is provided both presupported and supportfree in 28mm scale but are easily scaled to 32mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures.
This package includes:
- Captain Freja in action, both presupported and supportfree
28mm Type J Seeker (Type S Upgrade)
Now with parts that lets you install light kits!
For those who already own the Type S, this upgrade nets you the additional files needed to convert your Type S into a Type J.
Includes
- 28mm Type J Seeker Upgrade STL Files
Medical Pack
CURRENT VERSION: 1.0
Fully realise a medical bay or science lab aboard your vessel, space station or colony. Includes medical beds, scanners, sample storage and body scanners for diagnosing that alien parasite or collecting samples of alien flora and fauna.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 18 high detail tiles, including:
- S and A Sample Wall storage
S-Wall and regular wall medical operating tables
S Specimen Tables
Standalone large and small specemin containers
Body scanner
Sample Table
Quadruped Missile Launcher - Tribes
Released in our Tribe May 2023!
Prepare for intergalactic warfare as you equip your tabletop heroes with this formidable missile launcher. Crafted with precision and attention to detail, our 3D printable files offer a stunning replica of a futuristic weapon system. Designed to fit seamlessly into your sci-fi game scenarios, this missile launcher adds an extra layer of excitement and tactical advantage to your tabletop battles.
Whether you're commanding an elite squadron of space marines, defending a distant planet from alien invasions, or leading an interstellar rebellion, our missile launcher will become a centerpiece of your tabletop arsenal. Its sleek design, menacing presence, and undeniable firepower will leave your opponents in awe and your allies in admiration.
Includes:
- Quadruped Missile Launcher - Base.stl
Quadruped Missile Launcher - Cradle.stl
Quadruped Missile Launcher - Foot.stl
Quadruped Missile Launcher - Hip.stl
Quadruped Missile Launcher - Lock Ring.stl
Quadruped Missile Launcher - Missile Launcher.stl
Quadruped Missile Launcher - Thigh.stl
28mm Type S Scout/Courier
USD 80.00
Our glorious 28mm-scale, highly detailed Type S Scout/Courier, as well as the stretch goals (nine in total) which allow a high degree of customisation of the ship, and a 15mm base ship variant for those looking for a more classic Traveller scale.
Includes
- 28mm Type S Scout STL Files
28mm Type S Scout Stretch Goals STL Files
15mm Type S Scout STL Files
Habitation II
Expand your Starship deck plans with these habitation tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Counter Combo (unbased).stl
Double Counter Storage (unbased).stl
Double Counter Washers (unbased).stl
I Single Counter Storage.stl
I Single Counter Washer.stl
S Double Counter Combo.stl
S Double Counter Storage.stl
S Double Counter Washers.stl
Single Counter Storage (unbased).stl
Single Counter Washer (unbased).stl
A Kitchen Counter.stl
A Kitchenette.stl
kitchenwall_01.stl
kitchenwall_02.stl
Baseless Food Dispencer.stl
Baseless Trash Disposal.stl
I Food Dispencer.stl
I Trash Disposal.stl
Special Bunk Free Standing.stl
Special Double Bed Variant 1.stl
Special Double Bed Variant 2.stl
Special Single Bed Free Standing.stl
DoorTypeC.stl
Habitation Room Variant 1.stl
Habitation Room Variant 2.stl
II Corner Shower-WC combo.stl
Single Chair.stl
Sofa.stl
Table.stl
Gary Short II - 28mm Vertically Challenged Scientist
Doctor Gary Short, the vertically challenged humanoid scientist extraordinare returns! Sculpted by Kyoushuneko Miniatures, we introduce another four poses of Gary as he sciences the shit out of your scifi campaign. Includes pre-supported and standalone models of Gary in Zero-G, lying down, seated and with a shotty.
28mm Type J Seeker
Now with parts that lets you install light kits!
Get our Rob Caswell-style Type S conversion to the Type J Seeker prospecting and mining ship, featuring a classic traveller rear section, ore bays and pulse laser turret. This standalone version does not require the original Type S STL files to build.
Includes
- 28 mm Type J Seeker STL Files
Crew Miniatures
This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Captain Seated
- Tech Seated
- Tech Seated with helmet
- Pilot Seated
- Pilot Seated with helmet
- Pilot Seated
- Pilot Control Panel
- Tech Control Panel
- Crew Seat
- Captain's Chair
Gary Short - 28mm Vertically Challenged Scientist
Doctor Gary Short, vertically challenged humanoid scientist extraordinare. Sculpted by Kyoushuneko Miniatures, this highly detailed and expertly crafted miniaturecomes in two poses.
28mm Gig
USD 22.00
Official Traveller Spaceship Created by Craig Pay in collaboration with Ian Stead, the Gig represents the small craft belonging to the Type CE Gazelle-class Close Escort. Rendered here in 28mm glory, the design is based on Ian Stead's sketchup, with interior components from 2nd Dynasty.
Craig has meticulously written detailed instructions which are included with the files.
Starship Chimera STL Files
CURRENT VERSION: 1.0.8
Get the Starship Chimera STL files and all campaign stretch goals.
Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License
Quad Beam Laser Turret - Type A Free Trader Beowulf
This Quad Beam Laser Turret comes with four beam lasers. It is compatible with all our other turret ports on starships, not only the Beowulf
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Garage 3D Printer to customize the Beowulf to become what you want: Jump 2 Drive, Manoeuvre 2 Drive and Power 2, Fuel Bladders, Rear Airlock, Mezzanine, Life Support Controls, Sardine Low Berths, Vacc Suit Locker and Garage Workshop.
This package includes:
- Beowulf - Turret - Chassis.stl
Beowulf - Turret - Ring.stl
Beowulf Turrets - Turret Barrel - Quad Beam Laser.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
2nd Dynasty Ship Miniatures
2nd Dynasty's starships Shuttle Alpha, Scout Ship Beta and Transport Delta and their variants in 1:270 and tactical scale. This package includes STL files for 42 miniatures.
Please note, we will be revisiting these files in the future with updated versions. In the meantime, enjoy our older models.
Evil Tree Monster
The evil driuds have created an abomination to invade and haunt your role playing game. This evil tree monster is suitable for use with 28-32mm miniatures.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the tree. It is designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate the object for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Tree Monster 1.0.stl
Sardine Low Berths - Type A Free Trader Beowulf
Low berths taking up too much space? Try these emergency low berths! Cramming four low berths into half a Dton! The rotary base allows the pods to rotate into an ideal position for ingress and egress, although only one at a time.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Sardine Low Berths to customize the Beowulf to become what you want: Jump 2 Drive, Manoeuvre 2 Drive and Power 2, Fuel Bladders, Rear Airlock, Mezzanine, Life Support Controls, Vacc Suit Locker, Garage Workshop and Garage 3D Printer.
This package includes:
- Beowulf - Stretch Goals - Sardine Low Berths - Floor.stl
Beowulf - Stretch Goals - Sardine Low Berths - Low Berths.stl
Beowulf - Stretch Goals - Sardine Low Berths - Peg.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
1:270 Turrets
A conversion of many of our previous turret designs for use with 1:270 scale miniatures, compabible with our Traveller and Starship designs.
Includes
1:270 Turret Miniature STL Files
Space Fighter
Expand your Starship deck plans with this space fighter tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Body Clip 1.0.stl
- Bottom 1.0.stl
- Cockpit 1.0.stl
- Engine 1.0.stl
- Inner Thruster Chassis 1.0.stl
- Landing Gear 1.0.stl
- Left Barrel 1.0.stl
- Left Intake 1.0.stl
- Left Wing 1.0.stl
- Middle 1.1.stl
- Outer Thruster Chassis 1.0.stl
- Right Barrel 1.0.stl
- Right Intake 1.0.stl
- Right Wing 1.0.stl
- Thruster 1.0.stl
- Top 1.0.stl
- Turret Base 1.0.stl
- Wing Peg.stl
Vacc Suit Locker - Type A Free Trader Beowulf
A standalone locker in which hangs a vacc suit for ready use for extravehicular activity or in emergency decompression situations.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Vacc Suit Locker to customize the Beowulf to become what you want: Jump 2 Drive - Manoeuvre 2 Drive - Power 2, Fuel Bladders, Rear Airlock, Mezzanine, Life Support Controls, Sardine Low Berths, Garage Workshop and Garage 3D Printer.
This package includes:
- Beowulf - Stretch Goals - Vacc Suit Locker - Lid.stl
Beowulf - Stretch Goals - Vacc Suit Locker - Locker.stl
Vacc Suit - Hanging - 28mm - Presupported.stl
Vacc Suit - Hanging - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Notinante Spaceship Miniatures
Get the Notinante configuration of the Sleipnir (single engine, forward PDCs, Torpedo Launchers and Rail Gun) starship in 1:270 and Tactical scale. This featured Starship V alongside the base Sleipnir.
Includes
- Notinante Spaceship Miniature STL Files
Please Note: SLA presupported versions coming in a future update.
Habitation Tile Set
Expand your Starship deck plans with these habitation tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- DoorTypeC.stl
- E_2x2_DoubleBed.stl
- Habitation_Bunk_Room 1.1.stl
- Habitation_Double_Room 1.1.stl
- Habitation_Single_Room 1.1.stl
- Horizontal_Hypersleep.stl
- I Shower.stl
- I WC Shower.stl
- I WC.stl
- S_1x2_DoubleBunk_NoSupport.stl
- S_1x2_SingleBed.stl
- Vertical_Hypersleep.stl
Garage 3D Printer - Type A Free Trader Beowulf
Add an industrial 3D printer to your Beowulf’s garage area. Prints in a variety of popular materials and comes pre-programmed with a variety of ancient fabrication files from some unknown pre-imperium 2nd Dynasty.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Garage 3D Printer to customize the Beowulf to become what you want: Jump 2 Drive - Manoeuvre 2 Drive - Power 2, Fuel Bladders, Rear Airlock, Mezzanine, Life Support Controls, Sardine Low Berths, Vacc Suit Locker and Garage Workshop.
This package includes:
- Beowulf - Stretch Goals - Insert - Deck A - Garage - 3D Printer.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Pegasus Starship Miniatures
Get the Chimera Pegasus starship in 1:270 and Tactical scale. This was a standalone variant of the Chimera series that we featured back in Starship V alongside the Sleipnir.
Includes
- Pegasus Starship Miniature STL Files
Please Note: SLA presupported versions coming in a future update.
Turrets Pack III
Expand your Starship deck plans with these turrets pack III tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Airlock Turret.stl
- Drone Chicken Legs.stl
- Drone Head.stl
- Drone Quad Legs.stl
- I Internal Drone Tube.stl
- Radar Array Turret.stl
- Radar Dish Turret.stl
- Spotlight Turret.stl
Garage Workshop - Type A Free Trader Beowulf
Improve your Beowulf garage with a workshop area, with a bench for working and tool storage. Ideally used without the air raft in place.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Garage Workshop to customize the Beowulf to become what you want: Jump 2 Drive - Manoeuvre 2 Drive - Power 2, Fuel Bladders, Rear Airlock, Mezzanine, Life Support Controls, Sardine Low Berths, Vacc Suit Locker and Garage 3D Printer.
This package includes:
- Beowulf - Stretch Goals - Insert - Deck A - Garage - Workshop.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Cerberus Starship Miniatures
Get the Chimera Cerberus starship in 1:270 and Tactical scale. This was a standalone variant of the Chimera series that we featured back in Starship V alongside the Sleipnir.
Includes
- Cerberus Starship Miniature STL Files
Turrets Pack II
Expand your Starship deck plans with these turrets pack II tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Laser Lens Turret (Larger).stl
- Double Laser Lens Turret.stl
- Gun Turret Type 1.stl
- Gun Turret Type 2.stl
- Missile Turret Base.stl
- Missile Turret Rack.stl
- Scout Ship Turret Barrel.stl
- Single Laser Lens Turret (Larger).stl
- Single Laser Lens Turret.stl
- Single Laser Lens Type 2 Turret.stl
- Single Laser Lens Type 3.stl
- Triple Laser Lens Turret (Larger).stl
- Triple Laser Lens Turret.stl
Rear Airlock - Type A Free Trader Beowulf
This rear Airlock package allows your Beowulf to have a classic look from Megatraveller.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Rear Airlock to customize the Beowulf to become what you want: Jump 2 Drive, Manoeuvre 2 Drive and Power 2, Fuel Bladders, Mezzanine, Life Support Controls, Sardine Low Berths, Vacc Suit Locker, Garage Workshop and Garage 3D Printer.
This package includes:
- Beowulf - Stretch Goals - Rear Airlock - Airlock Iris.stl
Beowulf - Stretch Goals - Rear Airlock - Airlock Partition.stl
Beowulf - Stretch Goals - Rear Airlock - Engine Housing Frame - Upper - Centre.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Pathfinder Starship Miniatures
Get the Chimera Pathfinder starship in 1:270 and Tactical scale. This was a standalone variant of the Chimera series that we featured way back in Starship IV.
Includes
- Pathfinder Starship Miniatures STL Files
Turrets Pack I
Expand your Starship deck plans with these turret tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add support.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- cannon_launcher_turret_base.stl
- cannon_launcher_turret_bottom.stl
- cannon_launcher_turret_top.stl
- Rotary Laser Lens Turret 1.1.stl
- Rotary Laser Lens Turret.stl
- Single Auto Turret.stl
- Twin Auto Turret 1.1.stl
- Twin Auto Turret.stl
- Twin Manned Turret 1.1.stl
- Twin Manned Turret.stl
- Single Beam Cannon.stl
- Single Cannon.stl
- Single Laser.stl
- Triple Laser.stl
- Double Beam Cannon Left.stl
- Double Beam Cannon Right.stl
- Quad Cannon.stl
- Single Cannon.stl
- Single Laser.stl
- Triple Cannon Left.stl
- Triple Cannon Right.stl
- Double Beam Cannon Clip Opposite.stl
- Double Beam Cannon Clip.stl
- Laser Cannon Clip.stl
- Quad Cannon Clip.stl
- Single Cannon Clip.stl
- Single Cannon Variant Clip.stl
- Single Laser Clip.stl
- Triple Cannon Clip.stl
- Triple Cannon Large Clip.stl
Mezzanine - Type A Free Trader Beowulf
Get an extra floor in the starship Beowulf's cargo area with this mezzanine. It includes a cargo lift for moving cargo items to the upper deck.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives
There are several upgrades besides the Mezzanine to customize the Beowulf to become what you want: Jump 2 Drive, Manoeuvre 2 Drive and Power 2, Fuel Bladders, Rear Airlock, Life Support Controls, Sardine Low Berths, Vacc Suit Locker, Garage Workshop and Garage 3D Printer.
This package includes:
- Beowulf - Interior - Cargo Bay - Mezzanine - Deck C - Floor - Lift.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Aft - Lift.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Aft.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Middle - Lift.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Middle.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Port.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Starboard - Lift.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Floor - Starboard.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Lift Frame.stl
Beowulf - Interior - Cargo Bay - Mezzanine - Lift.stl
Beowulf - Side Hull - Deck B - Section 3 - Fuel Storage - Mezzanine - Port.stl
Beowulf - Side Hull - Deck B - Section 3 - Fuel Storage - Mezzanine - Starboard.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Starship Miniatures
Get Starship Chimera in miniature, including 8 ship variants in 1:270 and Tactical scales.
Includes
- Chimera Starship Miniatures STL Files
Habitation II - Starship III
Expand your Starship deck plans with these habitation tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Counter Combo (unbased).stl
- Double Counter Storage (unbased).stl
- Double Counter Washers (unbased).stl
- I Single Counter Storage.stl
- I Single Counter Washer.stl
- S Double Counter Combo.stl
- S Double Counter Storage.stl
- S Double Counter Washers.stl
- Single Counter Storage (unbased).stl
- Single Counter Washer (unbased).stl
- A Kitchen Counter.stl
- A Kitchenette.stl
- kitchenwall_01.stl
- kitchenwall_02.stl
- Baseless Food Dispencer.stl
- Baseless Trash Disposal.stl
- I Food Dispencer.stl
- I Trash Disposal.stl
- Special Bunk Free Standing.stl
- Special Double Bed Variant 1.stl
- Special Double Bed Variant 2.stl
- Special Single Bed Free Standing.stl
- DoorTypeC.stl
- Habitation Room Variant 1.stl
- Habitation Room Variant 2.stl
- II Corner Shower-WC combo.stl
- Single Chair.stl
- Sofa.stl
- Table.stl
28mm Official Traveller 40-ton Slow Pinnace
USD 34.95
As an official Traveller Small Craft this 40-ton vessel is a variant of the 40-ton Pinnace that trades out its swing wings, canards and decreases its power to create greater cargo capacity.
The Slow Pinnace originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured later in 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
FDM optimised
3MF build plates for quick and easy printing
Functional airlock and cargo bay doors
Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Fuel Bladders - Type A Free Trader Beowulf
This package includes two versions you can swap out, Expanded and Contracted. The fuel bladders are designed to maximise space for cargo when not in use, perfect for short hops between close star systems (a parsec or less). Expand them to store all the fuel needed for those longer voyages.
The fuel bladders are compatible with the Type A Free Trader Beowulf, the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Fuel Bladders to customize the Beowulf to become what you want: Jump 2 Drive, Manoeuvre 2 Drive and Power 2, Rear Airlock, Mezzanine, Life Support Controls, Sardine Low Berths, Vacc Suit Locker, Garage Workshop and Garage 3D Printer.
This package includes:
- Beowulf - Stretch Goals - Fuel Bladders - Expanded 10dTon Bladder.stl
Beowulf - Stretch Goals - Fuel Bladders - Retracted 10dTon Bladder.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Rover
Sometime when you are exploring a new planet, you need a way to get across rugged terrain quickly. Powered off fuel cells rechargeable from the ship's power plant, this 28mm scale modular rover will negotiate those rough and rocky surfaces, be it Martial plains or the icy surface of the Jovian moons.
Important! You will need the basic OpenLOCK templates to print clips to assemble this product, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts.
This product includes 23 STL-files.
Standing Controls
Expand your Starship deck plans with this standing controls tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- I_1x1_Bridge_Standing_Controls_1.0.stl
Life Support Controls - Type A Free Trader Beowulf
This machinery can be added strategically to several sections of Beowulf’s lower deck to demonstrate life support system controls.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Life Support Controls to customize the Beowulf to become what you want: Jump 2 Drive - Manoeuvre 2 Drive - Power 2, Fuel Bladders, Rear Airlock, Mezzanine, Sardine Low Berths, Vacc Suit Locker, Garage Workshop and Garage 3D Printer.
This package includes:
- Beowulf - Stretch Goals - Interior - Bulkhead - Crew Cabin - Low Berths - Sensors - Life Support Controls.stl
Beowulf - Stretch Goals - Interior - Bulkhead - Forward Crew Cabin - Low Berths - Life Support Controls.stl
Beowulf - Stretch Goals - Standalone - Life Support Controls.stl
Chimera Cerberus Upgrade
Cerberus is a brand new Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
WARNING: Requires Chimera or Pathfinder base ship.
If you already have the Chimera, this is all the new parts and instructions to make the Cerberus.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Please note that these are STL files only!
Engineering Tile Set
Expand your Starship deck plans with these engineering tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- AI_1x_Eng_Wall_Detail.stl
- A_1x2_Eng_Doorway_High_Detail.stl
- A_2x_Eng_Wall_Detail.stl
- DoorTypeA2.stl
- Engineering Corner 1.0.stl
- Engineering Window 1.0.stl
- E_2x2_Engineering_Corner_High_Detail.stl
- E_2x2_Engineering_Corridor_High_Detail.stl
- E_2x2_Engineering_Intersection_High_Detail.stl
- E_2x2_Engineering_T_Section_High_Detail.stl
- I Engineering Floor Dead End High Detail.stl
- I_Engineering_Corner_Floor_High_Detail.stl
- I_Engineering_Floor_High_Detail.stl
- I_Engineering_Floor_Intersection_High_Detail.stl
- I_Engineering_Floor_T_Intersection_High_Detail.stl
- S_1x2_Engineering_Corridor_High_Detail.stl
- S_2x1_Engineering_Corridor_High_Detail.stl
Jump 2 - Manoeuvre 2 - Power 2 - Type A Free Trader Beowulf
This package includes three files to make interstellar voyages faster and safer in the Traveller universe. Jump 1 Drive, which allows starships to enter jump space, is normally installed in the starship Beowulf and allows the ship to travel one parsec (or around 3.25 light years) per week, the distance between most systems along trading routes.
However, in the outer regions of the Third Imperium, the stars tend to be a little further apart. While a ship can carry extra fuel in its cargo bay to make two jumps in a row, this requires jumping into empty space between the stars (a horrifying experience in its own right) and adds a second week to the journey.
To upgrade the Beowulf with a Jump 2 drive can extend the range of the jump to 2 parsecs (about 6.5 light years), allowing safe travel between the stars in the standard one week jump time.
But this is not all. The enhanced Manoeuvre Drives take the ship's speed from Manoeuvre 1 to Manoeuvre 2, which give the Beowulf some serious propulsion systems.
And a second fusion reactor, the Power 2, adds the juice needed for powering a Jump 2 drive and Manoeuvre 2 propulsion system.
The Type A Free Trader Beowulf is the most ubiquitous ship of the Traveller universe's Third Imperium. This 28mm scale official Traveller vessel features three stackable decks that are easily removed for easy access and play. It is designed to easily install third party lighting. The interior is customisable and has accessories, such as larger engines or jump drives.
There are several upgrades besides the Jump 2 Drive, Manoeuvre 2 Drive and Power 2 to customize the Beowulf to become what you want: Fuel Bladders, Rear Airlock, Mezzanine, Life Support Controls, Sardine Low Berths, Vacc Suit Locker, Garage Workshop and Garage 3D Printer.
This package includes more than 30 files.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Chimera Cerberus
Cerberus is a brand new Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship is an impressive hobby project on its own that will keep you busy for weeks, and a fantastic prop or hero piece to add to your tabletop.
Please note that these are STL files only!
Parts are compatible with the Chimera and Pathfinder standalone ships.
This package includes more than 250 stl-files.
Galley
This model is FREE as part of the Starship IV Kickstarter campaign. Please click here to check it out: https://mmf.io/2nd
Expand your Starship deck plans with this galley tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Galley.stl
VTOL Side Mounts - Shuttle Alpha MK IV
If you want your Shuttle Alpha MK IV to be able to perform vertical take-off and landing these side mounts VTOL engines will do the trick.
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the tail fins to customize the MK IV to become what you want: the Tail Fins, the Dorsal Ring, the Missile Pods, the Side Stairs, the Extended Hull, the Fixed Wings and the Cargo Variant.
This package includes:
- Alpha MKIII Fidelity Pass - VTOL Engine - Bottom.stl
Alpha MKIII Fidelity Pass - VTOL Engine - MKIII Style - Bottom.stl
Alpha MKIII Fidelity Pass - VTOL Engine - MKIII Style - Top.stl
Alpha MKIII Fidelity Pass - VTOL Engine - Top.stl
Alpha MKIII Fidelity Pass - VTOL Engine - Turret Coupling.stl
Alpha MKIV - Engine Nozzle - 5mm LED.stl
Alpha MKIV - Main Engine Cone.stl
Alpha MKIV - Side Mount - Fuselage - Midsection - Bottom.stl
Alpha MKIV - Side Mount - Fuselage - Midsection - Top.stl
Alpha MKIV - Side Mount - Fuselage - Rear - Bottom.stl
Alpha MKIV - Side Mount - Fuselage - Rear – Top.stl
Alpha MKIV - Side Mount - VTOL Cap.stl
Sleipnir Starfighter Umbilical Expansion Kit
Attach any small craft from our Starfighters I Pack (Arrow Starfighter, Basilisk Starfighter, Lancer Starfighter and Starfire Fighter) to the Sleipnir. Includes hull modifications necessary to mount on a standard turret port, making it also compatible with our other ships with turret ports. Please note that the starfighters are not included.
Please note that these are STL files only!
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
Stl-files included in this expansion kit:
- 10 Starfighter Umbilical pieces
- 11 Turret Port pieces
Tubular Corridor Set
Expand your Starship deck plans with these tubular corridor tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- AS Tube Corridor Ring.stl
- AS Tube Doorway Simple.stl
- AS Tubular Corridor Doorway B (built in supports).stl
- Bridge_Door_1.0.stl
- E Corridor Intersection Floor Hatch.stl
- Floor Hatch.stl
- I+ Engineering Ramp Special 3-4 Tube.stl
- IIA Engineering Ramp Special 3-4 Tube.stl
- S Half Tube Corridor.stl
- S Tube Corridor Double Doorway (may require supports).stl
- Thin door.stl
- VE Curved Corridor One Exit.stl
- VE Curved Corridor Two Exits.stl
- VN Tube Corridor.stl
Cargo - Shuttle Alpha MK IV
This package includes modules to enable your MK IV to lift cargo crafts and brute force them into orbit.
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the tail fins to customize the MK IV to become what you want: the Dorsal Ring, the Missile Pods, the Side Stairs, the Extended Hull, the Fixed Wings, the Tail Fins and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - Cargo Module - Cargo Flap Tooth.stl
Alpha MKIV - Cargo Module - Central Fuselage - Bottom.stl
Alpha MKIV - Cargo Module - Gantry Magnet Pad.stl
Alpha MKIV - Cargo Module - Gantry Pillar Arm.stl
Alpha MKIV - Cargo Module - Gantry Pillar.stl
Alpha MKIV - Cargo Module - Gantry Rail Plug.stl
Alpha MKIV - Cargo Module - Gantry Roof Railing.stl
Alpha MKIV - Cargo Module - Gantry Sliding Clip.stl
Alpha MKIV - Cargo Module - Rear Fuselage - Bottom - Left.stl
Alpha MKIV - Cargo Module - Rear Fuselage - Bottom - Right.stl
Container 00 Standard 4C.stl
Container 00 Standard Lid 4C.stl
Sleipnir Torpedo Tubes Expansion Kit
Take your Sleipnir on the offensive by adding torpedo tubes to the dorsal or ventral hull. Includes a launch tube and storage for ten fish each. Also included are the necessary additional hull pieces to mount them.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- 7 Torpedo Tube pieces
- 10 Additional Hull Mounts/pieces
Cargo Bay Floor Set
Expand your Starship deck plans with these cargo bay floor tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- DS Walkway Doorstep.stl
- DS Walkway Ladder Flank.stl
- F Cargo Floor.stl
- I Cargo Floor.stl
- IA Base Deep.stl
- IIA Double Plate.stl
- IIA Special Cargo Floor Walkway.stl
- S Cargo Floor SidebySide.stl
- S Cargo Floor Stacked.stl
- S Cargo Floor Walkway.stl
- S Double Plate Floor.stl
- S Double Plate Side by Side.stl
- Special Double Plate Wedge Special.stl
- Special Double Plate Wedge (reversed).stl
Fixed Wings - Shuttle Alpha MK IV
This package includes an alternative nose for the MK IV with weapons mounts, as well as wings with fins, two-gun hard points, and a total of four missile racks which carry three missiles each! And it can be combined with the missile version.
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the fixed wings to customize the MK IV to become what you want: the Dorsal Ring, the Missile Pods, the Side Stairs, the Extended Hull, the Tail Fins, the Cargo Variant and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - Fixed Wings - Forward Gun.stl
Alpha MKIV - Fixed Wings - Medium Missile.stl
Alpha MKIV - Fixed Wings - Missile Rack.stl
Alpha MKIV - Fixed Wings - Nose - With Window Frames.stl
Alpha MKIV - Fixed Wings - Nose.stl
Alpha MKIV - Fixed Wings - Wing - Missile Hardpoints - Port.stl
Alpha MKIV - Fixed Wings - Wing - Missile Hardpoints - Starboard.stl
Alpha MKIV - Fixed Wings - Wing Fin.stl
Alpha MKIV - Fixed Wings - Wing Gun.stl
Sleipnir Hull Extenders
Expand your base Sleipnir in width, length or bredth with these hull extenders. Perfect for adding cargo pods or torpedo tubes, or extra PDC placements. The files include many new parts that also make printing the Sleipnir more manageable for smaller print beds, and can also allow you to expand the dimensions of the Sleipnir if you are feeling ambitious with your build.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- 28 Hull Extender pieces
Tubular Doorways
Expand your Starship deck plans with these tubular doorway tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- AS Tube Corridor Ring.stl
- AS Tube Doorway Simple.stl
- AS Tubular Corridor Doorway B (built in supports).stl
- Bridge_Door_1.0.stl
Extended Hull (Bus) - Shuttle Alpha MK IV
We have previously released a variant of the Shuttle Alpha that extends another 3 metres/10 ft at the engine intakes (adding 2 inches/50.8mm to the length of the ship at scale) – the Bus Variant. With the extended hull we are providing the same extension for MK IV, but also a way to extend the cargo bay by the same amount. You can mix and match of course, and although it might not be pretty, you can duplicate the extensions.
- It extends in two places, one in the cargo bay, and one in the cabin
Each extension is 2 inches/50.8mm or 3m/10 ft at scale
Each extension can be extended indefinitely, although it may look weird
The cabin extension part is compatible with the MKIII (earlier Shuttle Alpha variants)
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the extended hull to customize the MK IV to become what you want: the Dorsal Ring, the Missile Pods, the Side Stairs, the Tail Fins, the Fixed Wings, the Cargo Variant and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - Cargo Bay Extension - Landing Gear Flap - Inner - Rear - Starboard.stl
Alpha MKIV - Cargo Bay Extension - Landing Gear Flap - Outer - Rear - Starboard.stl
Alpha MKIV - Fuselage - Cabin Extension - Bottom.stl
Alpha MKIV - Fuselage - Cabin Extension - Top.stl
Alpha MKIV - Fuselage - Cabin Extension - Wide - Bottom.stl
Alpha MKIV - Fuselage - Cabin Extension - Wide - Top.stl
Alpha MKIV - Fuselage - Cargo Bay Extension - Bottom.stl
Alpha MKIV - Fuselage - Cargo Bay Extension - Landing Gear Housing - Bottom.stl
Alpha MKIV - Fuselage - Cargo Bay Extension - Top.stl
Alpha MKIV - Fuselage - Forward - Nose - Top - Extended Hull.stl
Alpha MKIV - Fuselage -Cargo Bay Extension - Rear – Bottom.stl
Sleipnir Forward PDCs Expansion Kit
Add two additional forward Point Defence Cannons to the nose of your base ship Sleipnir to increase fire coverage to shoot down those incoming fish.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- Hull - Deck 01 - PDC Bottom.stl
- Hull - Deck 01 - PDC Doors.stl
- Hull - Deck 01 - Top PDC Mount - Supports Recommended.stl
- PDC - Clip - Gun Mount.stl
- PDC - Gun - Medium Gatling.stl
- PDC - Turret Frame - Top PDC - Support Recommended.stl
- PDC - Turret Mount.stl
Hinged Ramp
Expand your Starship deck plans with this hinged ramp tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Special Transport Hinged Ramp v2.stl
Side Stairs - Shuttle Alpha MK IV
An alternative way to enter the Shuttle Alpha MK IV other than the rear ramp. This port side entrance is a folding staircase that allows access to the cabin behind the cockpit.
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the side stairs to customize the MK IV to become what you want: the Dorsal Ring, the Missile Pods, the Tail Fins, the Extended Hull, the Fixed Wings, the Cargo Variant and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - Chair.stl
Alpha MKIV - Door - Sliding Airlock - Cockpit.stl
Alpha MKIV - Floor - I-IA - Cabin - Airlock Semiotic.stl
Alpha MKIV - Floor - I-IA - Cabin - Cargo Semiotic.stl
Alpha MKIV - Floor - I-IA - Cabin - Cockpit Semiotic.stl
Alpha MKIV - Interior - Bunk - WC - 1.1.stl
Alpha MKIV - Side Ramp - Central Fuselage - A - Bottom.stl
Alpha MKIV - Side Ramp - Central Fuselage - B - Bottom.stl
Alpha MKIV - Side Ramp - Door.stl
Alpha MKIV - Side Ramp - Stairs - Bottom.stl
Alpha MKIV - Side Ramp - Stairs - Central Hinge.stl
Alpha MKIV - Side Ramp - Stairs - Fuselage to Door Hinge.stl
Alpha MKIV - Side Ramp - Stairs - Top.stl
Alpha MKIV - Side Ramp - Floor - Cockpit Doorway.stl
Alpha MKIV - Side Ramp - Hooked Floor Tile.stl
Alpha MKIV - Side Ramp - Interior - Small Galley.stl
Alpha MKIV - Side Ramp - Wall - DS - Cockpit - Cabin - Bottom.stl
Alpha MKIV - Side Ramp - Wall - DS - Cockpit - Cabin - Cargo Bay - Top.stl
Alpha MKIV - Side Ramp - Wall - DS - Cockpit - Forward Cabin - Bottom.stl
Alpha MKIV - Side Ramp - Wall - DS - Cockpit - Forward Cabin - Top.stl
Sleipnir Drone Room Expansion Kit
This Drone Room Expansion Kit adds an additional deck to the base starship Sleipnir and it includes a drone launch airlock. Please note that drones are not included, the Sleipnir drones are sold separately here.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
STL-files included in this expansion kit:
- 22 Drone Room Pieces
- 3 Hull pieces
- 1 Ladderwell Airlock Door piece
Wall Lockers A
Expand your Starship deck plans with the wall lockers A tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- II S-Wall Lockers.stl
Tail Fins - Shuttle Alpha MK IV
These tail fins are Shuttle Alpha MKIII style stabilisers added to the engine section of the Shuttle Alpha MK IV.
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the tail fins to customize the MK IV to become what you want: the Dorsal Ring, the Missile Pods, the Side Stairs, the Extended Hull, the Fixed Wings, the Cargo Variant and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - Fuselage - Rear - Top - Engine Mount - Tail Fins - Dorsal - Ventral.stl
Alpha MKIV - Fuselage - Rear - Top - Engine Mount - Tail Fins - Dorsal.stl
Alpha MKIV - Fuselage - Rear - Top - Engine Mount - Tail Fins - Ventral.stl
Sleipnir Hull Mounts Expansion Kit
This expansion kit for the base starship Sleipnir includes addtional hull placements to support additional PDC modules, or with further expansions, cargo pods and torpedo tubes.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
STL files included in this expansion kit:
- 10 Hull Mount pieces
Special Stairs and Railing
Expand your Starship deck plans with these special stairs and railing tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Special Railing.stl
- Stairs with Railing 1.1.stl
Missile Pods - Shuttle Alpha MK IV
This adds two folding missile pods to the dorsal fuselage of the MKIV, which carry 10 missiles each, allowing for Itano Missile Circus action. We have also added a torpedo option.
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the missile pods to customize the MK IV to become what you want: the Dorsal Ring, the Tail Fins, the Side Stairs, the Extended Hull, the Fixed Wings, the Cargo Variant and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - Missile Pods - Fuselage - Midsection - Top.stl
Alpha MKIV - Missile Pods - Missile Pod - Port.stl
Alpha MKIV - Missile Pods - Missile Pod - Starboard.stl
Alpha MKIV - Missile Pods - Missile Pod Arm - Port.stl
Alpha MKIV - Missile Pods - Missile Pod Arm - Starboard.stl
Sleipnir Turret Ports Expansion Kit
These turret ports adds the option to add our traditional turret types to the base starship Sleipnir's hull, and options exist for supporting basically every deck except 01, 07 and 08. A new turret base is included and an round airlock hatch if you just want more access.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- 11 Turret Ports and Turret pieces
Sofa Set
Expand your Starship deck plans with the sofa set tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- E 2x2 Sofa Set.stl
Dorsal Ring/AWACS - Shuttle Alpha MK IV
This adds a turret ring to the top of the MKIV. Two options are included, an AWACS radome and a point defence turret. The turret port is compatible with any 2nd Dynasty Turret type that can attach to a standard turret ring (but not barbettes).
In 2022 our best-selling Space Shuttle Alpha was redesigned to the Shuttle Alpha Mk IV. A distinctive variant, the Mk IV features fixed engines, weapon emplacements, working landing gear covers, a revised cockpit design, and increased fidelity.
And there are several upgrades besides the dorsal ring/AWACS to customize the MK IV to become what you want: the Tail Fins, the Missile Pods, the Side Stairs, the Extended Hull, the Fixed Wings, the Cargo Variant and the VTOL - Side Mounts.
This package includes:
- Alpha MKIV - AWACS Dish Bottom.stl
Alpha MKIV - AWACS Dish Top.stl
Alpha MKIV - Fuselage - Midsection - Top - Dorsal Ring.stl
Alpha MKIV - Turret Barrel.stl
Alpha MKIV - Turret Chassis.stl
AWACS Double Clip.stl
Turret Ring.stl
Sleipnir Style Galley Expansion Kit
Eating and drinking is as important in space as it is on the ground. This Galley Expansion Kit brings Sleipnir-style galleys to your standard OpenLOCK deck plans, allowing it to be used in our other ships.
Please note that these are STL files only!
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- Galley - IIS - Counter and Coffee Machine.stl
- Galley - IIS - Cupboard and Counter.stl
- Galley - IIS - Planter and Counter.stl
- Galley - ILS - Corner Counter Diagonal.stl
- Galley - ILS - Corner Counter.stl
- Galley - ILS - Corner Shelves Counter - Full.stl
- Galley - ILS - Corner Shelves Counter.stl
- Galley - IOS - Counter Shelves.stl
Lift Platform and Rail
Expand your Starship deck plans with these lift platform and rail tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Special Lift Platform.stl
- Special Lift Rail.stl
Cargo Bay Ramp
The Odyssey naturally lacks a way to load cargo aside from using the cargo lift in its hangar bay. This upgrade allows the use of one or two folding ramps on the starboard side of the ship. It can easily be mirrored to the port side if desired.
Sleipnir Rail Gun Expansion Kit
Mount some extra firepower on the nose of your starship Sleipnir with this Rail Gun Expansion Kit.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- Hull - Deck 01 - Bridge - Angled-Hybrid - Rail Gun Mount.stl
- Hull - Deck 01 - Nose - Lower Rim - Rail Gun Mount.stl
Double Bunk and Lockers
Expand your Starship deck plans with these double bunk and lockers tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- S Double Bunk with Locker (reversed).stl
- S Double Bunk with Locker.stl
Side Weapon Variants
These side weapon variants are one of the milestones in our starship campaign Odyssey.
They are suitable for use with 28-32mm miniatures and they are compatible with other 2nd Dynasty starships in the Chimera family, that is the Pathfinder, the Cerberus, the Pegasus, the Ataphoi, the Odyssey and of course the Chimera.
Compatible with the OpenLOCK system created by and available at Printable Scenery.
This package includes:
- Micro Missile.stl
Missile Cassette - Front Plate.stl
Missile Cassette - Front.stl
Missile Cassette - Rear.stl
Torpedo - Mini - Type 1.stl
Torpedo - Mini - Type 2.stl
Torpedo - Type 1.stl
Torpedo - Type 2.stl
Torpedo Launch Tube - Front Plate.stl
Torpedo Launch Tube - Front.stl
Torpedo Launch Tube - Hatch.stl
Torpedo Launch Tube - Rear.stl
Sleipnir Single Engine Expansion Kit
The base starship Sleipnir comes with a five engine configuration, but if you want your ship to look closer to the vessel it was inspired by, you can use this upgrade to switch out for a single massive engine. This expansion kit also includes retractable landing gears. You have the option of printing the massive single engine as one piece or in quarters, and the landing gear can be printed with or without fins.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
Stl-files included in this expansion kit:
- 18 Single Engine and Landing Gear pieces
Ladder Well
Expand your Starship deck plans with these ladder well tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- I Turret Ladder Well.stl
Rear Airlock Upgrade
The Rear Airlock is for Chimera series starship designs, particularly the Odyssey. It adds a rear airlock at the aft of the ship on Deck A.
Sleipnir External Cargo Expansion Kit
Turn your base ship Sleipnir into a cargo ship with these external cargo crates. This expansion kit includes cargo pods, gas pods and cargo frames. Also included are the necessary additional hull pieces to mount them.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
Stl-files included in this expansion kit:
- 14 External Cargo pieces
- 10 Additional Hull Mounts/pieces
Kitchenette
Expand your Starship deck plans with these kitchenette tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes
- AS Engineering to Kichenette Shelves.stl
- AS Engineering to Kichenette.stl
28mm Converging Beam Cannon Turret
This turret was designed with the Brick Kickstarter starship from Games ART by Philipp in mind. It is a smaller version of our Converging Beam Barbette from Turrets Pack IV that is compatible with any of our ships, or the Brick.
Sleipnir Boarding Tube Expansion Kit
Get your crew on and off the base ship Sleipnir in a safe manner with these boarding tubes. This expansion kit includes extended and retracted boarding tubes as well as covered and uncovered ones.
Please note that you will need the base ship Sleipnir to be able to use this expansion kit.
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
This expansion kit includes:
- Boarding Tube - Extended - Covered - Multimaterial Frame.stl
- Boarding Tube - Extended - Covered - Multimaterial.stl
- Boarding Tube - Extended - Covered.stl
- Boarding Tube - Extended.stl
- Boarding Tube - Retracted.stl
Spacesuit, Standing
Use these generic spacesuits as stand ins for your favourite characters in a sci-fi setting, scaled for 28-32mm play. Sculpted by Anton Moskvichev.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Spacesuit Standing pose (based)
- Spacesuit Standing pose (unbased)
Taurus 28mm Pushback Tow Tractor
The 28mm Taurus Pushback Tow Tractor is a science is a beastly 70 ton vehicle designed to tow aircraft and orbital vehicles to their launch area. 8 inches long and fully articulated, the cab can accomodate 28mm seated miniatures.
The Storage Room - Sample Files
Enjoy these free sample files from 2nd Dynasty. These objects featured in our second Kickstarter as a part of the Engineering Bulkheads and Crawlspaces. Connected together modularly with the OpenLOCK clip system from Printable Scenery, clips included.
Spacesuit, Walking
Use these generic spacesuits as stand ins for your favourite characters in a sci-fi setting, scaled for 28-32mm play.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Spacesuit Walking pose (based)
- Spacesuit Walking pose (unbased)
Conning Tower Bridge for Odyssey and Chimera
Making a large Chimera or Odyssey build? Why not add a conning tower with an alternative bridge layout to your vessel to give a commanding view of the starship.
Features two additional decks, including a 5-crew bridge, airlock, and lower deck with a cartography/astrogation suite and a chamber suitable for a ready room or captain's cabin.
Compatible with Chimera and Odyssey 28mm starships.
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Spacesuit, Spacewalk
Use these generic spacesuits as stand ins for your favourite characters in a sci-fi setting, scaled for 28-32mm play. Sculpted by Anton Moskvichev.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Spacesuit Spacewalk pose (based)
- Spacesuit Spacewalk pose (unbased)
Base Camp Doors Mini Pack
This planet side mini set of doors is made with our TNG specifications. Including a removable top section to allow easier play.
Includes
AS Bottom and Top
AS Bottom without Feet
Ramp
Stair
Door - Standard
Door - Window
This product is intended to be mixed with other wall sets. These clip together using Nurnie clips and OpenLOCK clips.
Chimera Cerberus
CURRENT VERSION: 1.1
A Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship is an impressive hobby project on its own that will keep you busy for weeks, and a fantastic prop or hero piece to add to your tabletop.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Prison Cell Walls
Expand your Starship deck plans with these prison cell wall tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wall Cell Corner (S)
- Wall Cell Padding (S)
- Wall Cell Padding End (S)
- Wall Cell Toilet And Padding (S)
- Wall Cell Single Padding (S)
Starship Odyssey 1:270 and Tactical Miniatures
This package includes the Odyssey starship but it comes in two different scales.
We have designed the starship miniatures to print in two scales. The first, '1:270' scale, was popularised by the X-Wing tabletop dogfighting game, and this version of the ship is scaled accurately to our other ships from Traveller Starship Miniatures. It make for great display piece, and while large on the table, it's not so large as to be impractical.
The second scale is 'Tactical scale', which scales the ship down to fit on a 1 inch hex base stand. The different campaign miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with both FDM (filament) printers and SLA (liquid resin) printers in mind. FDM versions are optimised for printing at 150 microns (0.15 mm layer height) using PLA. Resin versions have been pre-supported with unsupported versions also available.
This package includes one miniature starship (in both 1:270 and Tactical scale), clips and stands:
- Starship Odyssey
Chimera Pegasus
CURRENT VERSION: 1.0.2
A Chimera variant for transporting civilians from one planet to another.
⠀
⠀
⠀
⠀
Prison Cell Half Walls
Expand your Starship deck plans with these prison cell half wall tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Half Wall Cell Corner (S)
- Half Wall Cell Padding (S)
- Half Wall Cell Padding End (S)
- Half Wall Cell Toilet And Padding End (S)
- Half Wall Cell Single Padding (S)
Set Dressing
Science fiction wall inserts for use with the Odyssey 28mm starship. These inserts can be used to populate the slots in the Odyssey's bulkheads.
Chimera Pathfinder
CURRENT VERSION: 1.0.9
Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:
NO STRETCH GOALS INCLUDED
This is Starship Chimera Pathfinder only!
INCLUDES:
Starship Chimera Pathfinder STL Files
Non-Commercial Printing License
Paint and customisation by Brian Jenkins
Large Popup Turret
Expand your Starship deck plans with these large popup turret tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Turret Base (E)
- Turret Top
- Turret Rotator
- Turret Bottom
- Turret Base Down (E)
Chimera Support Upgrades
Add parts to add Support Rods and bulkheads to Chimera series starships, allowing them to take advantage of the stability of the Odyssey.
This adds 6mm support rod channels along the underside hull, and allows for slide in bulkheads to allow additional customisation and print friendliness. The results are increased stability and printability.
Custom Miniature
Double Bunk Bed
Expand your Starship deck plans with this double bunk bed tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Bunk Bed (S)
Small Craft Cradle
USD 14.95
Compatible with all our official Traveller Small Craft aside from the modular cutter, this modular docking area can be used to represent a part of a larger ship, space station or base and connects in a modular fashion using the OpenLOCK system.
The length of the tube can be customised to change the position of the loading airlocks and can be expanded upon easily using the 40 parts provided.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Vargr Soldier - Sniper Alt - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the sniper soldier has a labradorish face. We also have a alternative package where the vargr sniper soldier resembles a german shepherd.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Grenadier, Grenadier Alt, Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier – SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Alt – Sniper.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
All 2nd Dynasty Add-Ons
Single Bed
Expand your Starship deck plans with this single bed tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Single Bed (S)
Vargr Soldier - SMG Alt - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the soldier with a SMG has a labradorish face. We also have a alternative package where the vargr soldier with a SMG resembles a german shepherd.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Grenadier, Grenadier Alt, Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper and Vargr Soldier Sniper Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Alt – SMG.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
All Ships
Please note, the download for these ships are actually shared separately in individual series product downloads (kickstarter editions)
Double Bed
Expand your Starship deck plans with this double bed tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Bed (E)
Vargr Soldier - Aiming Alt - Traveller Miniature
The vargrs are a dogish race, with some humanoid features, that inhabits the Traveller universe. In this package the aiming soldier has a face much like a german shepherd. We also have a alternative package where the vargr aiming soldier resembles a labrador.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Grenadier, Grenadier Alt, Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier – SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Sniper Aiming.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Exclusive Add-Ons
This includes all the campaign-exclusive add-ons for the Type-S Scout/Courier Official 28mm-scale 3d Printable Traveller Starship and Crew Miniatures campaign.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Security Scanner
Expand your Starship deck plans with this security scanner tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Security Scanner (S)
Vargr Soldier - Shield and Bat Alt - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the soldier with a shield and a bat has a labradorish face. We also have a alternative package where the vargr soldier with a shield and a bat resembles a german shepherd.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Grenadier, Grenadier Alt, Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier – SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Alt - Riot Shield and Baton.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Navigation Controls
Expand your Starship deck plans with these navigation controls suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Bridge Navigation Controls (I)
Vargr Soldier - Shield and Gun Alt - Traveller Miniature
The vargrs are a dogish race, with some humanoid features, that inhabits the Traveller universe. In this package the soldier with a shield and a gun has a face much like a german shepherd. We also have a alternative package where the vargr soldier with a shield and a gun resembles a labrador.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Grenadier, Grenadier Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier – SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Riot Shield and Pistol.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Pilot Controls
Expand your Starship deck plans with these pilot controls suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Bridge Pilot Controls (I)
Vargr Soldier - Grenadier - Alt - Traveller Miniature
The vargrs are a dogish race, with some humanoid features, that inhabits the Traveller universe. In this package the grenadier soldier has a face much like a german shepherd. We also have a alternative package where the vargr grenadier soldier resembles a labrador.
There are five more soldiers, and their alternatives, in different poses equipped with various weapons: Vargr Soldier - Shield and Gun, Vargr Soldier – Shield and Gun Alt, Vargr Soldier - Shield and Bat, Vargr Soldier - Shield and Bat Alt, Vargr Soldier - Aiming, Vargr Soldier - Aiming Alt, Vargr Soldier Sniper, Vargr Soldier Sniper Alt, Vargr Soldier – SMG and Vargr Soldier – SMG Alt.
All vargr soldiers also come as a Vargr Soldiers package and are included in the Vargr Wolf Pack.
The figure is sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Soldier - Grenadier.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Shuttle Pilot Controls
Expand your Starship deck plans with these shuttle pilot controls suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle Pilot Controls (S)
Vargr Bandit - Twin Guns - Alt
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit with twin guns has a labradorish face. We also have a alternative package where the vargr with the twin guns resembles a german shepherd.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner A, Vargr Bandit - Gunner A - Alt, Vargr Bandit - Gunner B, Vargr Bandit - Gunner B - Alt, Vargr Bandit - Sword and Gun and Vargr Bandit - Sword and Gun - Alt.
All vargr bandits also come as a Vargr Bandits package and they are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Alt - Twin Pistols.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Medical Scanner B
Expand your Starship deck plans with this medical scanner tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Medical Scanner B
Vargr Bandit - Sword and Gun - Alt - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit with a sword and a gun has a face much like a german shepherd. We also have a alternative package where the vargr with a sword and a gun resembles a labrador.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner A, Vargr Bandit - Gunner A - Alt, Vargr Bandit - Gunner B, Vargr Bandit - Gunner B - Alt, Vargr Bandit - Twin Guns and Vargr Bandit - Twin Guns - Alt.
All vargr bandits also come as a Vargr Bandits package and they are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Sword and Pistol.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir KS Edition
Current Version: 1.2
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
You can find the lighting kits here.
We now have added a bonus miniature of the ship and the Notinante configuration! Enjoy!
Medical Scanner A
Expand your Starship deck plans with this medical scanner tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Medical Scanner A
Vargr Bandit - Gunner B - Alt - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit gunner B has a labradorish face. We also have a alternative package where the vargr gunner B resembles a german shepherd.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner A, Vargr Bandit - Gunner A - Alt, Vargr Bandit - Sword and Gun, Vargr Bandit - Sword and Gun - Alt, Vargr Bandit - Twin Guns and Vargr Bandit - Twin Guns - Alt.
All vargr bandits also come as a Vargr Bandits package and they are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Alt - Gunner.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Traveller Commercial License - Add-on
We realise that many Traveller fans may not have access to a 3D printer. While anyone who purchases our STLs has the right to get their files printed somewhere, we have worked alongside Far Future Enterprises to provide a commercial printing license as an add-on for small 3D printing companies.
This takes the form of a special add-on which extends your non-commercial license for anything purchased in this crowdfunding campaign (including older 2nd Dynasty models) for a period of 1 year from purchase. During this period, anything you print may be sold, although under no circumstances may you sell or redistribute digital files. You may of course sell items you have printed after the expiry period, so long as they were printed during the licensed period.
This license is for small-scale operations only. You may not produce molds or sublicense production to a third party.
Narrow Double Cabin
Expand your Starship deck plans with these narrow double cabin tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Narrow Double Cabin (2x3)
- Door
Vargr Bandit - Gunner A - Alt - Traveller Miniature
The vargrs are a dogish race with some humanoid features that inhabits the Traveller universe. In this package the vargr bandit gunner A has a face much like a german shepherd. We also have a alternative package where the vargr bandit gunner A resembles a labrador.
There are three more bandits, and their alternatives, in different poses equipped with various weapons: Vargr Bandit - Gunner B, Vargr Bandit - Gunner B - Alt, Vargr Bandit - Sword and Gun, Vargr Bandit - Sword and Gun - Alt, Vargr Bandit - Twin Guns and Vargr Bandit - Twin Guns - Alt.
All vargr bandits also come as a Vargr Bandits package and they are included in the Vargr Wolf Pack.
The figures are sculpted by creature sculpt artist Flavored Pickle.
This package includes:
- Vargr Bandit - Heavy.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
2nd Dynasty Turrets
Turrets Pack I, II and III all rolled into one for some variety on your Type S turret mount.
Narrow Single Cabin
Expand your Starship deck plans with these narrow single cabin tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Narrow Single Cabin (2x3)
- Door
Science Upgrade
This set upgrades the Odyssey's science lab, adding sophisticated analysers and science stations that look great in any science fiction setting. The main science station features a moveable robotic arm with a microscope attached.
Modular Deckplans Collection
Create your own starship deckplans with these tiles from Starship I and II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
⠀
⠀
⠀
⠀
Wide Single cabin
Expand your Starship deck plans with these wide single cabin tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wide Single Cabin (3x2)
- Door
28mm Shuttle Pod Variant
Most Recent Version: 1.1 - Added missing clip, optional midsection that can be extended, and updated the build plate
The shuttle pod variant is based on the Shuttle Pod introduced with the Odyssey starship. It is larger, featuring a small cargo area, more powerful engines, a full suite of control systems, attitude control thrusters, a topside escape hatch, and four fold down jump seats. The craft is also accessed via a rear ramp, making boarding easy, even for injured passengers.
The Shuttle Pod Variant, prints in less than a day and easily fits in the Odyssey's shuttle bay or on your tabletop.
Starfighter I & II
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. This add-on has our two Starfighter-pack included, compatible with each other to offer even more starfighter variants.
⠀
⠀
⠀
Wide Bunk Cabin
Expand your Starship deck plans with these wide bunk cabin tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wide Bunk Cabin (3x2)
- Door
30-Ton Passenger Module
This 30-Ton module variant for the Modular Cutter is designed to transport a passengers from orbit to a planet. It can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Passenger Module originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Medbay Upgrade
This pack adds hospital beds, a medical scanner bed (both with wall inserts and standalone), and a machine that goes bing as set dressing to your Starship Odyssey or any other science fiction scene.
Chimera KS Edition
The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds.
The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only!
Chimera contains approximately 400 parts and more than 100 unique parts.
Get the Starship Chimera STL files and all campaign stretch goals.
Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Wide Double Cabin
Expand your Starship deck plans with these wide double cabin tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wide Double Cabin (3x2)
- Door
Gigerian Brood Succubus Pusa
Enjoy an awesome bonus model from Papsikels! Be sure to check out his Tribe here on MyMiniFactory for tons of awesome nostalgic miniatures that work well with our products.
Transport Delta KS Edition
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Includes seven ship variations!
Narrow Cabin Pack
Expand your Starship deck plans with these narrow cabin pack tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Narrow Single Cabin (2x3)
- Narrow Bunk Cabin (2x3)
- Narrow Double Cabin (2x3)
- Door
Bulkhead Door Frame Variants
Customise your starship Odyssey with these modular bulkheads offering alternative doorway size and placement on your Odyssey build. Includes parts to change the bulkheads on all three decks of the Odyssey.
Scout Ship Beta KS Edition
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The scout ship has moderately sized parts, with options for large prints to print with less parts
Contains over 80 parts
Largest part is 129×125×97mm (5×5×3.8")
There are some additional margins if parts are rotated, etc.
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Includes eight ship variations!
Narrow Bunk Cabin
Expand your Starship deck plans with these narrow bunk cabin tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Narrow Bunk Cabin (2x3)
- Door
Medbike
This months tribes release introduces the Medbike.
One of your teammates rolled a bad saving throw, and are now in need of medical attention? Time is of the essence? The Medbike is the answer. Just drop the body into one of the two detachable crypods, and zoom away to the closest licensed medical provider or clinic on this speedy hoverbike.
Shuttle Alpha KS Edition
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds
High and low detail versions
Contains over 50 pieces
Low support requirements
You can also modify your Space Shuttle Alpha with seven different variants.
Helm Controls
Expand your Starship deck plans with these helm controls suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Bridge Helm Controls (I)
Base Camp Walls Mini Pack
This planet side mini set of walls is made with our TNG specifications. Including a removable top section to allow easier play.
Includes
- IA Bottom and top
- IA top without light
- Inside Corner Bottom and Top
- Outsider Corner Bottom and Top
This product is intended to be mixed with other wall sets to add airlocks. These clip together using Nurnie clips and OpenLOCK clips.
2nd Dynasty Miniatures
This package includes 65 character miniatures from the 2nd Dynasty's catalogue.
⠀
Hangar Taxi
Expand your Starship deck plans with this hangar taxi tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hangar Taxi
Crew Chair Upgrade
Upgrade of the Odyssey's crew seat which provides addtional oxygen, an emergency helmet, and first aid kit, preparing your ship for combat encounters where you may want to depressurise the bridge.
Compatible with the Type S Scout/Courier, Free Trader Beowulf and Starship Odyssey, or as standalone scatter terrain.
Beta Centauri Upgrade
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
Security Controls
Expand your Starship deck plans with these security control tiles, based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Security Control (I)
- Unbased Security Control
Captain's Chair Upgrade
Upgrade of the Odyssey's captain's seat which provides addtional oxygen, an emergency helmet, and first aid kit, preparing your ship for combat encounters where you may want to depressurise the bridge.
Compatible with the Type S Scout/Courier, Free Trader Beowulf and Starship Odyssey, or as standalone scatter terrain.
T5 Turrets
A collection of compatible turret pieces based on the turret art from T5 Traveller.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Analysis Bench
Expand your Starship deck plans with these analysis bench tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Analysis Bench Base and Sample Containers (S)
- Analysis Bench Base (S)
- Sample Container
- Sample Container (lid)
- Sample Container (middle
- Sample Container (bottom)
Doctor Soren Pack
Introducing the Human Scientist Miniature, a must-have addition for any space explorer or enthusiast. Sculpted by Kyoushuneko Miniatures, this highly detailed and expertly crafted miniature captures the essence of a human scientist in five unique poses.
Whether standing attentively, taking action, floating weightlessly in zero-g, or sitting down to analyze data, this miniature is versatile and perfect for any space-themed diorama or tabletop game. And after a long day of research and exploration, the human scientist can be seen relaxing, taking a well-deserved break.
Air Raft Variants
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved,
Sample Storage
Expand your Starship deck plans with these sample storage tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
Sample Storage A
Sample Storage B
Starspawn Lamprey Pack
Introducing the Starspawn Lamprey - a grotesque and horrifying alien organism that preys on unsuspecting explorers and crew members alike! With three dynamic poses, three ovid spawn pods, and a terrifying alien growth, this miniature will add a sense of danger and horror to any tabletop game or display.
The Starspawn Lamprey is an insidious creature, with an otherworldly design that is sure to leave a lasting impression. With its long, tentacle-like appendages and gaping, tooth-filled maw, it is a creature that strikes fear into the hearts of even the bravest space explorers.
The miniature is highly detailed, and comes with three different poses, allowing for a range of options when setting up your game or display. In addition, the three ovid spawn pods can be used to create an even more terrifying tableau, as the creature's young emerge from their protective sacs.
Sculpted by That Blasted Samophlange.
Beta Centauri
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
Medical Beds
Expand your Starship deck plans with these medical bed tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Medical Operating Table with Roof, (II, S)
- Medical Operating Table with Roof
- Medical Operating Table, (II, S)
- Medical operating Table
Hangar Set TNG 28mm Scifi Terrain
A new set of hangar wall and floor tiles based on the TNG standard (2nd Dynasty's The Next Generation standard), including both more modular versions of the tiles in the Odyssey and a reimagining of the original Hangar set tiles.
Hangar door works pratically, and slides into the floor.
Walls print without supports, with a top and bottom side to allow easy play.
The 2nd Dynasty's The Next Generation Standard includes:
- High Fidelty Redesign – scale, look and features of the parts are greatly improved. They will print excellent on FDM machines at 0.15 mm layer heights, and SLA machines will see even more fantastic results
- Removable Walls – The top half of the walls can be kept on for gorgeous display or removed for easy of play
- Sliding Clip Corners – we have replaced Openlocks full clip system with our sliding clips which allow clip connections for all directions, allowing more stable constructions
- Print Orientation Optimised – each piece has been pre-rotated into the optimal printing orientation and designed to print with maximum detail on a a FDM machine, and will print brilliantly on a SLA machine
- Support Free (FDM) – All the parts print support free on our Prusa I3 Mk35, although some parts can maintain higher quality with supports added (mostly pipes)
- SLA Friendlier design – we are not offering complete SLA support, we have removed all the built-in openlock-supports and most tiles will print flat on the build plate and will not require drainage if you print solid
Imperial Star Marines in TL 15 Battledress
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved
Healing Tank
Expand your Starship deck plans with this healing tank tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Healing Tank
Captain Freja Pack
Introducing Captain Freja, the fearless and experienced starship captain who can lead your team through any challenge in the depths of space. As a highly detailed miniature, she comes in five different poses, each depicting a different facet of her leadership and personality. This is an expansion of the original Captain Freja 28mm science fiction miniature sculpted by Papsikels.
Standing: Captain Freja exudes confidence and readiness, ready to take on whatever comes her way.
Action: Showcasing her skill in combat and quick thinking in high-pressure situations.
Zero-g: She displays her grace and finesse as she navigates through space with ease.
Relaxed: Taking a moment to recharge and reflect, reminding us that even the bravest heroes need a break sometimes.
Seated: Demonstrates her ability to command her ship from the captain's chair, overseeing the crew with a watchful eye.
As the leader of your team, Captain Freja's experience and determination make her a valuable asset in any space mission. Her character and leadership qualities are reflected in each of her poses.
Vacuum Loader Mech Zero-G
In space no one can hear you scream – but you may do some serious work in this Loader mech designed to be used in zero-g. In this product the loader mech is in a zero/g position. It also comes in a standing and an action position. There is also a variant with no pilot with the visor up or down.
The miniature was commissioned by 2nd Dynasty and created by Flavored Pickle.
Included in this product is an external storage housing compatible with our Sleipnir series 3D printable starship.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- LoderMech_Pilot_ZeroG_fixed.stl
- Hull - Loader - Lower - Midsection.stl
Wide Cabin Pack
Expand your Starship deck plans with these wide cabin pack tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Wide Bunk Cabin (3x2)
- Wide Single Cabin (3x2)
- Wide Double Cabin (3x2)
- Door
Base Tiles TNG 28mm Scifi Terrain
We revisited our original tiles with increased fidelity, and TNG standardisation, includes floor tiles that all print without supports and in better quality than ever.
Following the OpenLOCK standard floor template, you can build out your base and change on the fly with this glueless clip system. Contains about 20 files following OpenLOCK system.
Sample Cockpit & Pilot
Cockpit & pilot sample STLs from Traveller, now live on MyMiniFactory Crowdfunding!
Back here https://www.myminifactory.com/crowdfunding/traveller-359
Beds
Expand your Starship deck plans with these bed tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Single Bed (S)
- Double Bed (E)
- Double Bunk Bed (S)
Crawlspaces TNG 28mm Scifi Terrain
This collection of 28mm scale tiles can be used to create science fiction ventalation shafts, service ducts, maintenance crawlspaces, jeffries tubes, or any other tight, claustrophobic spaces that you would not want to meet an alien nightmare in.
Unlike the original crawlspaces, Crawlspaces TNG creates a standardised layout following the standards set in Starship: The Next Generation. It features increased fidelity and a wider range of variants.
Medical Bay
Expand your Starship deck plans with these medical bay tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- E+A Medbay.stl
- S Medbay Bed Scanner.stl
- S Medbay Workstation.stl
Weapons Locker
Expand your Starship deck plans with these weapons locker tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Weapons Locker, closed (II)
- Weapons Locker, open (II)
Odyssey 28mm Science and Survey Starship
Odyssey is a brand new 28mm starship design from 2nd Dynasty. Based on an original concept for what became Starship Chimera.
With nearly 300 unique pieces that fit together seamlessly and without glue, using the OpenLOCK clip system, it's the perfect choice for anyone looking to explore the vast reaches of space in style and comfort.
Odyssey Features
If there was one word to sum up the Odyssey's concept, it is 'Playability'. We want the Odyssey to be our most scenario friendly starship design to date.
- Multi-Engine Configuration
- FTL/Power Core
- Generous Cargo Bay
- Cargo lift/elevator
- Hangar Bay - Suitable for housing a Shuttle Pod, or other very small aerospace vehicle
- Extensive Crawlspace System
- Two laser-lens arrays for broadside sorties and science missions
- Large sensor array
- Multi-level bridge bubble with an incomparible view
Design Features
In addition to new curved hull pieces, a completely new layout, approximately 90% of the Odyssey is actually either completely new or upgraded pieces, making it a unique ship compatible with the Chimera series.
- New curved hull peices for the top and bottom deck
- 6mm channels for optional aluminium support rods
- Modular bulkhead interior parts, allowing customisation of door positions
- Floor tiles bought to Starship: The Next Generation standard
- Insert slot implementation
Workshop Bay
Expand your Starship deck plans with these workshop bay tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- E+A Workshop.stl
- S Workshop 3D Printer.stl
- S Workshop Work Bench.stl
Teleporters
Expand your Starship deck plans with these teleporter tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Teleporter (EA)
- Teleporter (E)
- Teleporter (I)
Gaeru Barth 28mm Starfighter
The Gaeru Barth, also known as the 'Toad', is a squat starfighter with landing skids. It is armed with twin cannons swivelling mounts and has four micro-missile launchers with a payload of 10 missiles in total held internally. It features a tri-engine configuration with gimbled main thrusters.
Design-wise, it is inspired by Zentradi and Gamilas fighter designs. It is 28mm scale, with a detailed cockpit with an openable canopy for a pilot miniature.
This starfighter design was created for our Tribes in February 2023 and will feature in the upcoming Starfighter III Frontier (Q2, 2023)
The Gaeru Barth is the latest spaceframe in our Starfighter collection. Be sure to check out Starfighter I and Starfighter II, and keep a look out for variants in Starfighter III.
Boarding Tube
Expand your Starship deck plans with these boarding tube tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Boarding Tube Full.stl
- Boarding Tube Lower Half.stl
- Boarding Tube Retracted.stl
- Boarding Tube Upper Half.stl
Floor Hatch
Expand your Starship deck plans with these floor hatch tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Starship Floor Hatch
- Starship Hatch Frame
- Starship E-Ladder Well
Missile Room - Transport Delta
Modify your Transport Delta to integrate these Missile Room pieces.
Please note that you will need the base ship Transport Delta to be able to use these pieces.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Missile Room Left Side.stl
Missile Room Right Side.stl
Transport - Lower Hull - Left Side - Missile Hardpoint 1.1.stl
Transport - Lower Hull - Right Side - Missile Hardpoint 1.1.stl
Vacuum Loader Mech Visor Up & Down
In space no one can hear you scream – but you may do some serious work in this Loader mech designed to be used in zero-g. In this product the loader mech has the visor up or down. There are also variants including a pilot that comes in standing, action and zero-g positions.
The miniature was commissioned by 2nd Dynasty and created by Flavored Pickle.
Included in this product is an external storage housing compatible with our Sleipnir series 3D printable starship.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Loadermech_empty_Visordown_fixed.stl
- Loadermech_empty_VisorUps_fixed.stl
- Hull - Loader - Lower - Midsection.stl
Security Doors
Expand your Starship deck plans with these security door tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Doorway (IA)
- Cell Door A
- Cell Door B
- Wide Doorway (DS)
- Laser Grid (DS)
Hard Points - Transport Delta
Modify your Transport Delta to integrate these Hard Points Variant pieces.
Please note that you will need the base ship Transport Delta to be able to use these pieces.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Hard Points Left.stl
- Hard Points Right.stl
- Laser Cannon Clip.stl
- Quad Cannon Clip.stl
Vacuum Loader Mech Action
In space no one can hear you scream – but you may do some serious work in this Loader mech designed to be used in zero-g. In this product the loader mech is in an action position. It also comes in a standing position and a zero-g position. There is also a variant with no pilot with the visor up or down.
The miniature was commissioned by 2nd Dynasty and created by Flavored Pickle.
Included in this product is an external storage housing compatible with our Sleipnir series 3D printable starship.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- LoaderMech_Pilot_Slam_fixed.stl
- Hull - Loader - Lower - Midsection.stl
Propulsion
Expand your Starship deck plans with these propulsion tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Propulsion (S)
- Unbased Propulsion
- Based Propulsion - Wall (S)
Spidercrab 28mm Space Utility Vehicle
Need a heavy duty vehicle to make starship repairs in a vacuum? Star port looking for tugs for larger ships? Salvagers looking to break down derelict hulls?
The Spidercrab is a 28mm scale space utility vehicle platform for tabletop gaming. It folds up into a compact form that can be stored in a small area, and once launched, can extend its large industrial arms to manipulate the space environment.
A manipulator claw and laser cutter/welder allow fine manipulation of the environment, while the main arms have magnetic clamps for ataching to hulls or holding cladding or other materials, as well as ripper claws for prying and tearing up wreckage.
The spidercrab assebles completely gluelessly and prints entirely support free on an FDM printer. The arms, main thrusters and maipulator arms are all fully articulated. The pressurised cabin is fully detailed and has room for a worker to store supplies, a cot, or other creature comforts.
Vacuum Loader Mech Standing
In space no one can hear you scream – but you may do some serious work in this Loader mech designed to be used in zero-g. In this product the loader mech is standing. It also comes in an action position and a zero-g position. There is also a variant with no pilot with the visor up or down.
The miniature was commissioned by 2nd Dynasty and created by Flavored Pickle.
Included in this product is an external storage housing compatible with our Sleipnir series 3D printable starship.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Loadermech_Pilot_Standing_fixed.stl
- Hull - Loader - Lower - Midsection.stl
Generator
Expand your Starship deck plans with these generator tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Generator
- Unbased Generator
Imperial Star Marine Suiting Up Traveller Miniature
This package includes an ISM, Imperial Star Marine, in TL-15 battledress suiting up. There is also a free standing rack and a marine standalone figure. All comes in both presupported and unsupported versions.
The ISM are elite interstellar forces found aboard Imperial vessels in the Traveller universe. The marines enforces the Emperors will and fights any opposition in space will it be piracy, defend starports or navy bases. They also engage in boarding actions in space and support other forces on the ground.
We offer five more ISM: standing with extended life support (ELS), in action with ELS, kneeling, in zero-g and standing.
The Imperial Star Marines are sculpted by Papsikels.
This package includes:
- Star Marine Suiting Up - Marine Standalone - Presupported.stl
Star Marine Suiting Up - Marine Standalone.stl
Star Marine Suiting Up - Presupported.stl
Star Marine Suiting Up - Rack Standalone - Presupported.stl
Star Marine Suiting Up - Rack Standalone.stl
Star Marine Suiting Up.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Vacuum Loader Mech Pack
In space no one can hear you scream - but you may do some serious work in this Loader mech designed to be used in zero-g. It comes complete with an external storage housing compatible with our Sleipnir series 3D printable starship.
The miniature was commissioned by 2nd Dynasty and created by Flavored Pickle.
This package includes five poses, provided at 28mm scale, and the alternate housing hull section designed to replace one of the Sleipnir's lower PDCs.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Loadermech_empty_Visordown_fixed.stl
- Loadermech_empty_VisorUps_fixed.stl
- LoaderMech_Pilot_Slam_fixed.stl
- Loadermech_Pilot_Standing_fixed.stl
- LoderMech_Pilot_ZeroG_fixed.stl
- Hull - Loader - Lower - Midsection.stl
Server
Expand your Starship deck plans with these server tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based Starship Server (S)
- Unbased Starship server
28mm Official Traveller 30-Ton Fuel Module
USD 9.95
This 30-Ton Fuel Module can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Fuel Module originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Imperial Star Marine in Zero-G Traveller Miniature
This package includes an ISM, Imperial Star Marine, in TL-15 battledress in zero-gravity with a tactical nuke launcher. It comes in both presupported and unsupported versions.
The ISM are elite interstellar forces found aboard Imperial vessels in the Traveller universe. The marines enforces the Emperors will and fights any opposition in space will it be piracy, defend starports or navy bases. They also engage in boarding actions in space and support other forces on the ground.
We offer five more ISM: standing with extended life support (ELS), in action with ELS, kneeling, standing and suiting up.
The Imperial Star Marines are sculpted by Papsikels.
This package includes:
- Star Marine - Tac Nuke Launcher - Grav Flight Pack - Presupported.stl
Star Marine - Tac Nuke Launcher - Grav Flight Pack.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Kitchen Pack
Expand your Starship deck plans with these kitchen pack tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- A Kitchen Counter.stl
- A Kitchenette.stl
- I Food Dispencer.stl
- I Single Counter Storage.stl
- I Single Counter Washer.stl
- I Trash Disposal.stl
- S - Table Chairs 1.1.stl
- S Double Counter Combo.stl
- S Double Counter Storage.stl
- S Double Counter Washers.stl
Gargantuan Drive
Create your own gargantuan drive which could represent a gravity drive, power plant, or FTL drive for your Sci-Fi rpg or tabletop wargame! Comes in 2x2 square inch base and 4x4 square inch base varaints.
The model is designed to be printed in parts and assembled using OpenLOCK clips (available from printablescenery.com for free). The parts snap together for glueless assembly.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing package.
This package includes:
- 2x2 tile version in 3 parts
- 4x4 tile version in 6 parts
Imperial Star Marine Kneeling Traveller Miniature
This package includes an ISM, Imperial Star Marine, in TL-15 battledress in a kneeling position. It comes in both presupported and unsupported versions.
The ISM are elite interstellar forces found aboard Imperial vessels in the Traveller universe. The marines enforces the Emperors will and fights any opposition in space will it be piracy, defend starports or navy bases. They also engage in boarding actions in space and support other forces on the ground.
We offer five more ISM: standing with extended life support (ELS), in action with ELS, standing, in zero-g and suiting up.
The Imperial Star Marines are sculpted by Papsikels.
This package includes:
- Star Marine - Rifle - ECM Module - Presupported.stl
Star Marine - Rifle - ECM Module.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scatter Terrain Kitchen
Decorate your tabletop with detailed scatter pieces. This package includes several different counters, food dispencer, trash disposal, kitchenette, table and chair, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes
- A_kitchenette_standalone.stl
- A_Kitchen_Counter_Standalone.stl
- Baseless Food Dispencer.stl
- Baseless Trash Disposal.stl
- Double Counter Combo (unbased).stl
- Double Counter Storage (unbased).stl
- Double Counter Washers (unbased).stl
- Printing_Guide_1.3-1.pdf
- Single Chair.stl
- Single Counter Storage (unbased).stl
- Single Counter Washer (unbased).stl
- Table_4_ Legs_Standalone.stl
Popup Turret
Expand your Starship deck plans with these popup turret tiles suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Popup Turret Base(I)
- Turret Chassi
- Gun
- Popup Turret Base Down (I)
Imperial Star Marine in Action with ELS Traveller Miniature
This package includes an ISM, Imperial Star Marine, in TL-15 battledress in action with Extended Life Support, ELS. It comes in both presupported and unsupported versions.
The ISM are elite interstellar forces found aboard Imperial vessels in the Traveller universe. The marines enforces the Emperors will and fights any opposition in space will it be piracy, defend starports or navy bases. They also engage in boarding actions in space and support other forces on the ground.
We offer five more ISM: standing, standing with ELS, kneeling, in zero-g and suiting up.
The Imperial Star Marines are sculpted by Papsikels.
This package includes:
- Star Marine - Rifle - Extended Life Support Pack - Presupported.stl
Star Marine - Rifle - Extended Life Support Pack.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Scatter Terrain Habitation Pack
Decorate your tabletop with detailed scatter pieces. This package includes several different beds, counters, WC/Showers, tables and sofas, suitable for use with 28-32mm miniatures, but easily rescalable to any scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
This package includes more than 30 files.
Bridge Controls II
Expand your Starship deck plans with these bridge controls suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle Pilot Controls (S)
- Pilot Controls (I)
- Navigation Controls (I)
- Helm Controls (I)
Imperial Star Marine Standing with ELS Traveller Miniature
This package includes an ISM, Imperial Star Marine, in TL-15 battledress standing at ease with Extended Life Support, ELS. It comes in both presupported and unsupported versions.
The ISM are elite interstellar forces found aboard Imperial vessels in the Traveller universe. The marines enforces the Emperors will and fights any opposition in space will it be piracy, defend starports or navy bases. They also engage in boarding actions in space and support other forces on the ground.
We offer five more ISM: standing, in action with ELS, kneeling, in zero-g and suiting up.
The Imperial Star Marines are sculpted by Papsikels.
This package includes:
- Star Marine - Rifle - At Ease - Extended Life Support - Presupported.stl
Star Marine - Rifle - At Ease - Extended Life Support.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Engineer Bessie
Mechanical problems is no issue for engineer Bessie. She is well suited to work with captain Freja on our starship fleet which includes Scout Ship Beta, Transport Delta, Space Shuttle Alpha, Chimera and Chimera Pathfinder.
Bessie is provided supportfree in a standing position in both 28mm and 35mm scale.
The engineer Bessie were commissioned by 2nd Dynasty and sculpted by Papsikel.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures.
This package includes:
- Supportfree engineer Bessie in 28mm and 35mm
Bridge Controls I
Expand your Starship deck plans with these bridge controls suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Rear Controls (I)
- Rear Controls Bottom (I)
- Rear Controls Top
- Rear controls Flat Panel (I)
Imperial Star Marine Standing Traveller Miniature
This package includes an ISM, Imperial Star Marine, in TL-15 battledress standing at ease. It comes in both presupported and unsupported versions.
The ISM are elite interstellar forces found aboard Imperial vessels in the Traveller universe. The marines enforces the Emperors will and fights any opposition in space will it be piracy, defend starports or navy bases. They also engage in boarding actions in space and support other forces on the ground.
We offer five more ISM: standing with extended life support (ELS), in action with ELS, kneeling, in zero-g and suiting up.
The Imperial Star Marines are sculpted by Papsikels.
This package includes:
- Star Marine - Rifle - At Ease - Presupported.stl
Star Marine - Rifle - At Ease.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Captain Freja Seated
Captain on the bridge! Captain Freja is well suited to operate our starship fleet which includes Scout Ship Beta, Transport Delta, Space Shuttle Alpha, Chimera and Chimera Pathfinder.
In this package Freja is in a seated position. She is also available in a standing version. Expand her crew by adding engineer Bessie to the roster to keep those engines fine tuned and give it all she's got.
The captain was commissioned by 2nd Dynasty and sculpted by Papsikels. The miniature is provided both presupported and supportfree in 28mm scale but are easily scaled to 32mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures.
This package includes:
- Captain Freja seated, both presupported and supportfree
- Captains chair
Maintenance Floor
Expand your Starship deck plans with this maintenance floor tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
Starship Maintenance Floor (E)
Shuttle Pod
This Shuttle Pod can fit into a standard Chimera Escape Pod mounting or in a small hangar bay (requires 3 squares of clearance). It can tightly squeeze in a four man crew and limited cargo to shuttle over short distances.
Includes 3mf print bed for quick and easy printing.
Captain Freja Standing
Captain on the bridge! Captain Freja is well suited to operate our starship fleet which includes Scout Ship Beta, Transport Delta, Space Shuttle Alpha, Chimera and Chimera Pathfinder.
In this package Freja is in a standing position. She is also available in a seated version. Expand her crew by adding engineer Bessie to the roster to keep those engines fine tuned and give it all she's got.
The captain was commissioned by 2nd Dynasty and sculpted by Papsikels. The miniature is provided both presupported and supportfree in 28mm scale but are easily scaled to 32mm.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures.
This package includes:
- Captain Freja standing both presupported and supportfree
Starship Engine
Expand your Starship deck plans with this engine tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Starship Engine
Mercenary Traveller Miniature
This package contains a mercenary in action pose, in both supported and unsupported versions.
The character is sculpted by Kyoushuneko.
This package includes:
- Mercenary - Presupported.stl
Mercenary.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Space Shuttle Alpha Mobile Home Variant Upgrade
Modify your Space Shuttle Alpha with a spacious and comfortable mobile home variant. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- I Shower.stl
- I WC Shower.stl
- I WC.stl
- II S-Wall Lockers.stl
- S Camper Kitchenette.stl
- Scout Ship S Double Bunk Lockers.stl
- S - Table Chairs 1.1.stl
Shower/WC
2023 Update: This has been revisited thanks to our Tribe. The WC can now open and close the lid, prints without need to remove supports, and has a new slot in version so you can paint with ease.
Expand your Starship deck plans with these refresher tiles consisting of showers, WCs and combination units suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shower (I)
- WC (I)
- Combined Shower/WC (I)
Vacc Suits Hanging - Traveller Miniature
This package contains two vacc suits hanging, one with and one without backpack. They come in both supported and unsupported versions.
There are also three other vacc suits in different poses: space walk, walking without the helmet and vacc suit in zero-g. The vacc suits also come in a package: Vacc Suits.
The vacc suits are sculpted by Kyoushuneko.
This package includes:
- Vacc Suit - Hanging - 28mm - Presupported.stl
Vacc Suit - Hanging - 28mm.stl
Vacc Suit - Hanging - Backpack - 28mm - Presupported.stl
Vacc Suit - Hanging - Backpack - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Drones
Secure your starship or surveil the hostile environment of space with these drones. These drones where made for our starship Sleipnir, please read more below.
This package includes the base chassis of a drone, stand and four optional weapons systems.
The miniatures were commissioned by 2nd Dynasty and sculpted by Flavoured Pickle. They are provided at 28mm scale.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Base chassi
- Stand
- Four optional weapons systems
Gunship
Current Version: 1.1 - Turret 1.1.stl update
Expand your Starship deck plans with this gunship tile suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Gunship
Vacc Suits in Zero-G
This package contains a vacc suit in zero-g in both supported and unsupported versions. There are also three other vacc suits in different poses: space walk, walking without the helmet and vacc suits hanging. The vacc suits also come in a package: Vacc Suits.
The vacc suits are sculpted by Kyoushuneko.
This package includes:
- Vacc Suit - Zero G - 28mm Presupported.stl
Vacc Suit - Zero G - 28mm.stl
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
Sleipnir Android Zero-G
Every ship should have a maintenance android for heavy lifting and fixing things in places where it is too dangerous for humanoids to go. In this product it is in zero-g. The android comes in three more poses: working, standing and seated.
The miniature was commissioned by 2nd Dynasty and sculpted by Papsikels. It is provided presupported in 32mm and 28mm scale. There is also supportfree versions.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the miniatures. They have been designed with SLA printers in mind but can be printed on FDM printers.
The Sleipnir is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
The Sleipnir is currently available at 2nd Dynasty´s pledge manager Starship V - Sleipnir, Crew Miniatures and Deck Designer here on MMF.
The Sleipnir is detailed inside and out and a variety of configurations can be used to customise the deck plans that include eleven decks standard.
This package includes:
- Maintenance android zero-g
FTL Drive
Expand your Starship deck plans with these FTL Drive tiles, both based and unbased, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Based FTL Drive (S)
- Unbased FTL Drive
Catch up with every single product 2nd Dynasty has made to date at more than a 75% discount. Over 500 products in all. Includes a massive volume of 28mm scale starships, fully detailed inside and out, and all their variants: Shuttle Alpha, Scout Ship Beta, Transport Delta, Sleipnir, Chimera, Chimera Pegasus, Chimera Cerberus, Chimera Pathfinder, Odyssey, Shuttle Alpha MKIV, Starfighters I and II, Operation Maelstrom, and all of our tribes offerings to date. Also includes our science fiction interior tiles from Starship I & II, Starship: The Next Generation, dozens of science fiction crew miniatures, and a huge variety of standalone products. And of course, everything in this campaign with the exception of Physical models and commercial licenses.
Add-ons
USD 14.95
Compatible with all our official Traveller Small Craft aside from the modular cutter, this modular docking area can be used to represent a part of a larger ship, space station or base and connects in a modular fashion using the OpenLOCK system.
The length of the tube can be customised to change the position of the loading airlocks and can be expanded upon easily using the 40 parts provided.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 29.95
An official Traveller Small Craft. This 30-ton vessel commonly referred to as a Slow Boat features a streamlined hull including fixed wings and trades thrust for greater cargo capacity.
The Slow Boat originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured in January of 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
- FDM optimised
- 3MF build plates for quick and easy printing
- Functional airlock and cargo bay doors
- Lighting ready (we used a 3 volt coincell battery with a 5mm blue LED)
- Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 9.95
This is our two-seated variant of the Official Traveller 28mm Rampart-class Light Fighter. This variant, sometimes called the FL-128/2 is used for training exercises and battlefield command. The command and control version has the pilot seated at the nose and the RIO at the rear. In a trainer version, the trainee sits in the front seat, with the instructor in the rear seat.
The aerofighter design has a removable cockpit canopy, swappable landing gear, and modular weapons system.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 8.00
An Official Traveller 28mm Rampart-class Light Fighter, this vehicle is all engine, allowing the pilot to quickly intercept in atmosphere or deep space at constant accellerations of up to 6G.
This is a single seat variant. Comes with stand and landing gear options.
For more general information, see the Traveller wiki:
https://wiki.travellerrpg.com/Rampart_class_Light_Fighter
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 16.00
The 1:270 and tactical versions of the official Traveller small crafts the Launch, the Ship's Boat, the Pinnace and the Modular Cutter. Also includes the 1:270 and tactical versions of the Rampart Light Fighter and the Two-Seated Rampart.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 8.95
The Grant Engine Module is an alternative engine section compatible with our Small Craft, primarily the modular cutter, ship's boat, launch and gig. It uses the design language attributed to classic Traveller artist, Glenn Grant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 15.95
Sponsored by Traveller Small Craft Kickstarter Campaign
If you're a fan of old-school Traveller and its iconic 80s style, you're in for a treat. We've meticulously designed and crafted a 28mm STL file set for 3D printing that brings to life the beloved G-Carrier, a classic from the golden era of sci-fi gaming. Get ready to embark on thrilling interstellar adventures with this timeless vehicle model!
Based on the vintage Traveller stats, the G-Carrier is an 8-ton marvel of engineering. It's built to transport your squad from planetary surfaces to the vastness of space and back. The G-Carrier boasts an array of features, including a turret for added firepower, a rear ramp for easy entry and exit, an escape hatch for quick getaways, and a side hatch for flexible access. With heavy armor plating, your squad will be well-protected during your interstellar escapades.
- Minimal Support Required: We understand the importance of easy printing. That's why our G-Carrier design has been optimized to minimize the need for supports. You'll spend less time on post-processing and more time enjoying your printed models.
- Includes Build Plate: To further enhance your 3D printing experience, we've included a build plate. It's designed to make the printing process more convenient and efficient, ensuring your G-Carrier comes out just the way you want it.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 22.00
Official Traveller Spaceship Created by Craig Pay in collaboration with Ian Stead, the Gig represents the small craft belonging to the Type CE Gazelle-class Close Escort. Rendered here in 28mm glory, the design is based on Ian Stead's sketchup, with interior components from 2nd Dynasty.
Craig has meticulously written detailed instructions which are included with the files.
USD 22.00
Even though most air rafts are capable of reaching orbit they are not intended for extended flight in space. Instead are air rafts a good way to travel around on many worlds in the Traveller universe.
Air rafts comes in several different models and this package includes a van, a grav bike and a base two-seater Air Raft and a four seater and tray back options with a Saloon, Coupe and Pickup variant.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 53.00
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc in different poses, a mixture of Vargr soldiers and pirates, Aslan, Hivers and more, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 69.00
This is the Traveller Starship Miniatures Kickstarter Edition, i.e. both the core ships and the ships that where included in the Stretch Goals, a total of 52 starships in two different scales, 26 in each. The ships, which featured most prominently in the Traveller5 Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.
We have designed the starship miniatures to use two scales.
The first, 1:270 scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.
The second scale is Tactical scale, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.
The core ships feature a variety of popular classic Traveller designs, all originally visualised by Ian Stead, aside from our own Murphy-class Type S Scout/Courier (both versions of the Type S have been provided for collectors). From merchant vessels to system patrol boats and mercenary cruisers, they range in size from 100 to 800 tons (as per the Traveller rules).
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 80.00
Our glorious 28mm-scale, highly detailed Type S Scout/Courier, as well as the stretch goals (nine in total) which allow a high degree of customisation of the ship, and a 15mm base ship variant for those looking for a more classic Traveller scale.
Includes
- 28mm Type S Scout STL Files
28mm Type S Scout Stretch Goals STL Files
15mm Type S Scout STL Files
USD 127.00
The most ubiqutous ship of the Third Imperium is the Type A Free Trader, commonly known as the Beowulf-class. This Official Traveller vessel has been beautifully recreated from Traveller 5 deck plans into a 28mm scale (1:59) monstrosity that brings the most iconic Traveller player ship onto your tabletop.
Features:
- 28mm Type A Free Trader Beowulf STL Files
- Three stackable decks that are easily removed for easy access and play
- Designed to easily install third party lighting from Zoromerlights.com
- Customise the interior with accessories, such as larger engines or jump drives
- Print rapidly with 3MF build plates
and 16 Stretch Goals:
- Jump 2
- Fuel Bladder
- Decals
- Power 2
- Sardine Low Berths
- Dead Astronaut
- Manoeuvre 2
- 30ton Gig Deckplans
- Rear Airlock
- Mezzanine
- Workshop
- Garage 3D Printer
- Garage Workshop
- Vacc Suit Locker
- Quad Beam Laser Turret
- Life Support Controls
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 265.00
The Traveller Commercial License allows commercial printers to print and sell our licensed Traveller designs for a period of 1 year. During this time, any Traveller designs from 2nd Dynasty that you purchase may be printed and sold for profit. STL files may never be redistributed and sold however.
For additional licensing information, see 2nddynasty.com.
USD 49.95
Now with parts that lets you install light kits!
In the Traveller Tabletop Universe the Type J Seeker is a rebuilt Type S Scout/Courier, one of the iconic starships. The Type J Seeker is usually converted to a mining ship but they are also known to be used in illicit circumstances.
The Seeker is a fully 3D-printable spaceship scaled for 28mm (1:59) play in your favourite Tabletop RPG, Wargame or for display. The Type J Seeker is highly detailed inside and out. Compatible with the OpenLOCK system created by and available at Printable Scenery.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 34.95
As an official Traveller Small Craft this 40-ton vessel is a variant of the 40-ton Pinnace that trades out its swing wings, canards and decreases its power to create greater cargo capacity.
The Slow Pinnace originally featured as a stretch goal in our Traveller Small Craft Kickstarter in 2023.
The initial release includes build plates but lacks instructions, which should be featured later in 2024.
Notable Features:
- 28mm default scale (can be scaled up or down)
FDM optimised
3MF build plates for quick and easy printing
Functional airlock and cargo bay doors
Removable landing gear
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.
USD 9.95
This 30-Ton Fuel Module can dock with the 50-Ton Modular Cutter or be used as a standalone set piece on your gaming table.
The 28mm 50-ton Modular Cutter can be found here.
The Fuel Module originally featured as a social stretch goal in our Traveller Small Craft Kickstarter in 2023.
© 2024 2nd Dynasty AB
Produced Under License
Traveller ™ is © 2024 Mongoose Publishing Ltd. All rights reserved.