Return to the Badlands - Wasteland Minis, Vehicles, and Scenics

A set of models from my "Return to the Badlands" campaign, including 11 all-new pre-supported minis, listed below.

Minis included

• Traders (x2) + trader table and goods
• Irradiated Kid
• Scout (not yet uploaded)
• Junker (not yet uploaded)
• Bruiser (not yet uploaded)
• Brawler
• Porkchop and Dozer (bullies)
• Wheelie (makeshift wheelchair)
• Digger (miner)

-------

These models are included pre-supported and unsupported, and are part of my Return to the Badlands Campaign, which is live now if you want tons of awesome scenics, vehicles, and minis for your wasteland tables: https://www.myminifactory.com/frontier/return-to-the-badlands-wasteland-minis-vehicles-and-scenics-2028

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

A set of models from my "Return to the Badlands" campaign, including the below. NOTE this set included non-damaged versions of some of the items as well as noted below

• Tons of stock items (various sets of boxes/tins/cans/etc)
• Multiple shelving units (regulard, coolers, and freezer units)
• ATM (regular and damaged)
• Checkout (regulard and damaged)
• Mop bucket
• Wet Floor Sign
• Shopping Carts (regular and damaged)

-------

These models are included pre-supported and unsupported, and are part of my Return to the Badlands Campaign, which is live now if you want tons of awesome scenics, vehicles, and minis for your wasteland tables: https://www.myminifactory.com/frontier/return-to-the-badlands-wasteland-minis-vehicles-and-scenics-2028

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

A set of models from my "Return to the Badlands" campaign, including the below. 

• car lift
• water tank
• creeper
• car ramps
• trollies (empty and with engines)
• two standalone engines
• parts/stuff shelf
• jack / jack stand / anvil
• large garage workstation set piece
• stack of junk items / parts
• toolbox
• junked car

-------

These models are included pre-supported and unsupported, as indicated in the graphic, and are part of my Return to the Badlands Campaign, which is live now if you want tons of awesome scenics, vehicles, and minis for your wasteland tables: https://www.myminifactory.com/frontier/return-to-the-badlands-wasteland-minis-vehicles-and-scenics-2028

NOTE that at the time of uploading, only about 50% of the items are pre-supported (shelves and stock items). The remainder will be added shortly!

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

Get the STL files for all the scenics, minis, AND vehicles in this project, which includes a mix of large FDM optimized pieces and smaller, resin pre-supported pieces. This includes all core + unlocked STls in this category from this project.

More info here: https://www.myminifactory.com/frontier/beyond-the-badlands-wasteland-minis-vehicles-scenics-755

Get the STL files for all the vehicles in this project, which includes a mix of large FDM optimized pieces and smaller, resin pre-supported pieces. This includes all core + unlocked STls in this category from this project.

More info here: https://www.myminifactory.com/frontier/beyond-the-badlands-wasteland-minis-vehicles-scenics-755

Get the STL files for all the minis in this project, which are all high detail and generally designed for resin printing (including pre-supported pieces). This includes all core + unlocked STls in this category from this project.

More info here: https://www.myminifactory.com/frontier/beyond-the-badlands-wasteland-minis-vehicles-scenics-755

Get the STL files for all the scenics in this project, which includes a mix of large FDM optimized pieces and smaller, resin pre-supported pieces (excludes minis and vehicles). This includes all core + unlocked STls in this category from this project.

More info here: https://www.myminifactory.com/frontier/beyond-the-badlands-wasteland-minis-vehicles-scenics-755

An addon for "Beyond the Badlands" campaign, including the below. NOTE this set included non-damaged versions of most of the items as well.

• Power Hammer
• Drill Press
• Lathe & Late Table
• Band Saw
• 2x Stools
• Toolbox
• Modular Workbenches (4 tops, 4 bottoms, 1 shelf)
• Push cart
• 4 drawer sets for use on cart or workbench
• Parts tray + tools
• Modlar parts bins
• Hydraulic lift cart (up and down)
• Desk Lamp
• Bench Grinder
• Bench Vise

-------

These models are included pre-supported and unsupported, and were originally part of my Beyond the Badlands Campaign, which still has late pledge available if you prefer saving money on large bundles of models: https://go.ec3d.design/beyond-the-badlands

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

An addon for "Beyond the Badlands" campaign, including the below list. NOTE this set included non-damaged versions of most of the items as well.

• Body bags
• Hospital Beds
• Gurneys
• Crash Cart
• Wheelchair
• Tool Tray
• Computer Cart
• Lab Fridge
• Lab Equipment
• Partition
• + MORE

-------

These models are included pre-supported and unsupported, and were originally part of my Beyond the Badlands Campaign, which still has late pledge available if you prefer saving money on large bundles of models: https://go.ec3d.design/beyond-the-badlands

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

This set includes all you need for an amazing zombie vacation including all the below, which is pre-supported, cut/hollwed as needed and designed for resin printing in high detail

• 5 ghoul/zombie minis
• set of camping scenics. (chair, radio, thermos,cooler, grill, tent)
• an RV (with configurable parts)
• an old retro Airstream camper

-------

These models are included pre-supported and unsupported, and were originally part of my Beyond the Badlands Campaign, which still has late pledge available if you prefer saving money on large bundles of models: https://go.ec3d.design/beyond-the-badlands

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

An addon for "Beyond the Badlands" campaign, including:

• Billboards (3x)
• Freeway signs (2x)
• Roadway Pieces (2x)
• Broken Bridge Pieces (2x)
• Ramp Pieces (2x)
• Bus stop
• Traffic Lights
• Lamp Posts
• Street Lights
• Traffic Cones (4x)
• Mobile Road Construciton Light

-------

These models are included pre-supported and unsupported, and were originally part of my Beyond the Badlands Campaign, which still has late pledge available if you prefer saving money on large bundles of models: https://go.ec3d.design/beyond-the-badlands

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

An addon for "Beyond the Badlands" campaign, including:

• Excavator (support free)
• Heavy Duty Forklift (support free)
• Skid Steer (resin cut/pre-supported)
• Frontend Loader (resin cut/pre-supported)
• Cement Truck (resin cut/pre-supported)

-------

These models are included pre-supported and unsupported, and were originally part of my Beyond the Badlands Campaign, which still has late pledge available if you prefer saving money on large bundles of models: https://go.ec3d.design/beyond-the-badlands

 
** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

Minis, props, and scenery from Oblieg's Gallery of Grave Goods (https://www.kickstarter.com/projects/ecaroth/obliegs-gallery-of-grave-goods-printable-gaming-props)

NOTE -- this includes all the props (including ones that were not unlocked during the Kickstarter), the miniatures, and a digital version of the lore book and cards.

This set contains 25+ models including support-free minis, and terrain/scatter - these are the full collection ALL unlocked items from my recent Community (Treasure)Chest - Volume 2 project - to see and learn more about what’s included, check out the link https://fundrazr.com/ec3d-treasure-chest-volume-2?ref=ab_341mfRRJJvV341mfRRJJvV

This set contains 25+ models including support-free minis, and terrain/scatter - these are the full collection of ALL unlocked items from my recent Community (Treasure)Chest - Volume 3 project - to see and learn more about what’s included, check out the link https://fundrazr.com/ec3d-treasure-chest-volume-3?ref=ab_341mfRRJJvV341mfRRJJvV

This set contains 25+ models including props, support-free minis, and terrain/scatter - these are the full collection ALL unlocked items from my recent Community (Treasure)Chest - Volume 1 project - to see and learn more about what’s included, check out the link here: https://fundrazr.com/ec3d-community-chest-volume-1?ref=ab_341mfRRJJvV341mfRRJJvV

The races and places below the surface, from my previous campaign Skyless Realms: https://www.kickstarter.com/projects/ecaroth/the-skyless-realms-3d-printable-tabletop-models

This add-on includes everything in the kickstarter, including the minis and scatter categories (see the kickstarter campaign page for more details). Please note, many of these miniatures require supports to print and are not supportless.

The races and places below the surface, from my previous campaign Skyless Realms: https://www.kickstarter.com/projects/ecaroth/the-skyless-realms-3d-printable-tabletop-models

This add-on includes everything in the "scenery" category (see the kickstarter campaign page for more details).

The races and places below the surface, from my previous campaign Skyless Realms: https://www.kickstarter.com/projects/ecaroth/the-skyless-realms-3d-printable-tabletop-models

This add-on includes everything in the "minis" category (see the kickstarter campaign page for more details). Please note, many of these miniatures require supports to print and are not supportless.

This is the Starfinder-compatible Stat Block book from my Terra Conflict Kickstarter (https://go.ec3d.design/the-terra-conflict)

Featuring Arabian/Persian/Egyptian/desert terrain/scatter, monsters, and minis: https://go.ec3d.design/empire-of-scorching-sands-ks

This add-on is equivalent to the what's included in the core + unlocked stretch goals for everything in the campaign -- please see the campaign for more details.

Featuring Arabian/Persian/Egyptian/desert terrain/scatter, monsters, and minis: https://go.ec3d.design/empire-of-scorching-sands-ks

This add-on is equivalent to the what's included in the core + unlocked stretch goals in the MINIATURES category -- please see the campaign for more details.

Featuring Arabian/Persian/Egyptian/desert terrain/scatter, monsters, and minis: https://go.ec3d.design/empire-of-scorching-sands-ks

This add-on is equivalent to the what's included in the core + unlocked stretch goals in the TERRAIN/SCENERY category -- please see the campaign for more details.

A sprawling campaign, featuring nautical, jungle, pirate, and undersea minis and environs - View the original campaign here: https://go.ec3d.design/depths-of-savage-atoll

This add-on includes all the core+unlocked items in the "Scatter Terrain" category. Please see the original project page for more info.

A sprawling campaign, featuring nautical, jungle, pirate, and undersea minis and environs - View the original campaign here: https://go.ec3d.design/depths-of-savage-atoll

This add-on includes all the core+unlocked items in the full Kickstarter. PLEASE NOTE the miniatures are not support-free, and many will require support to print. Please see the original project page for more info.

A sprawling campaign, featuring nautical, jungle, pirate, and undersea minis and environs - View the original campaign here: https://go.ec3d.design/depths-of-savage-atoll

This add-on includes all the core+unlocked items in the "Miniatures" category. PLEASE NOTE these miniatures are not support-free, and many will require support to print. Please see the original project page for more info.

The full collection of all 12 previously released premium sets from Hero's Hoard - over $100 value, as seen for sale on Hero's Hoard.

To see the details of what's included, please view this URL: https://www.heroshoard.com/heroshoardproducts/?tag=EC3D-Scenery-Set

This set is from my Ignis Quadrant Kickstarter (https://go.ec3d.design/the-ignis-quadrant-ks). 

This set is all the scenery, vehicles, and miniatures included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

Everything from the core reward and stretch goals from my first Kickstarter Forest of Oakenspire at a great discount: https://www.kickstarter.com/projects/ecaroth/forest-of-oakenspire-3d-printable-tabletop-models

This set is from my Ignis Quadrant Kickstarter (https://go.ec3d.design/the-ignis-quadrant-ks). 

This set is all the scenery items included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

A chilly, northern project featuring icy, arctic tundra, terrain/scatter, monsters, and minis - originally Kickstarted here: https://go.ec3d.design/wilds-of-wintertide-ks

This add-on features all core + unlocked stretch goals in the "Scenery/Terrain" category of that project -- please see the original Kickstarter page for more details.

This set includes all core goals + unlocked stretch goals from my Terra Conflict Kickstarter (https://go.ec3d.design/the-terra-conflict)

These models are designed for “fleet scale” space combat/gaming. Included are unsupported versions and versions pre-supported for resin printing (STL and Lychee files). Each item is designed to use a flight stand with a 3mm hole (such as those from LITKO or the 3D printable ones here: https://go.ec3d.design/ship-stands).

----------------

** For commercial/merchant resale of printed versions of these models, please visit: go.ec3d.design/licensed-printer-agreement-packet **

All the minis and scenics from my Everyday Folk: Part One campaign (including unlocked stretch goals!)

https://www.myminifactory.com/frontier/everyday-folk-support-free-models-for-all-the-missing-common-folk-1184

This set includes all core goals + unlocked stretch goals + the 2 extra addon fleets from my Terra Conflict Kickstarter (go.ec3d.design/the-terra-conflict)

These models are designed for “fleet scale” space combat/gaming. Included are unsupported versions and versions pre-supported for resin printing (STL and Lychee files). Each item is designed to use a flight stand with a 3mm hole (such as those from LITKO or the 3D printable ones here: go.ec3d.design/ship-stands).

All the minis and scenics from my Everyday Folk: Part One campaign (including unlocked stretch goals!)

https://www.myminifactory.com/frontier/everyday-folk-part-2-fill-your-world-1504

A chilly, northern project featuring icy, arctic tundra, terrain/scatter, monsters, and minis - originally Kickstarted here: https://go.ec3d.design/wilds-of-wintertide-ks

This add-on features all core + unlocked stretch goals in the entire project -- please see the original Kickstarter page for more details.

This set is from my Ignis Quadrant Kickstarter (https://go.ec3d.design/the-ignis-quadrant-ks). 

This set is all the vehicle items included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

A chilly, northern project featuring icy, arctic tundra, terrain/scatter, monsters, and minis - originally Kickstarted here: https://go.ec3d.design/wilds-of-wintertide-ks

This add-on features all core + unlocked stretch goals in the "Miniatures" category of that project -- please see the original Kickstarter page for more details.

This set is from my Astra Nebula Kickstarter (https://go.ec3d.design/the-astra-nebula). 

This add-on set is all the miniatures included in that campaign and the art book (see the campaign for more info).

This set is from my Novus Landing Kickstarter (go.ec3d.design/novus-landing-ks).

This set is all the miniatures, vehicles, and scenery included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

This set incudes tons of monsters and bad guys for your tabletop. This set was kickstarted and this add-on reward includes all the core + unlocked + bonus goals from that project.

For more info view the original project here: https://www.kickstarter.com/projects/ecaroth/beast-and-baddies-3d-printable-tabletop-models

This set is from my Novus Landing Kickstarter (https://go.ec3d.design/novus-landing-ks).

This set is all the miniatures included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

This set is from my Novus Landing Kickstarter (https://go.ec3d.design/novus-landing-ks). 

This set is all the scenery items included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

This set is from my Novus Landing Kickstarter (https://go.ec3d.design/novus-landing-ks).

This set is all the vehicle items included in the core and unlocked stretch goals from that campaign (see the campaign for more info).

This set is from my Ignis Quadrant Kickstarter (https://go.ec3d.design/the-ignis-quadrant-ks). 

This set is all the miniatures included in the core and unlocked stretch goals from that campaign (see the campaign for more info).