B6.1 / B6.2 / SC6.1 Wheelie Bar Mount
$4.99 B6.1 / B6.2 / SC6.1 Wheelie Bar Mount
Published 2020-07-08T14:36:12+00:00
This mount allows you to run a Traxxas style wheelie bar on the B6.1 / B6.2 / SC6.1 platform for No-Prep Drag Racing.
You will need 2 M3x20mm screws and 2 M3x8mm to attach the mount to the top of the transmission housing.
If you want to use a sway bar replace the M3x8mm screws with M3x10mm screws and use them as set screws.
I recommend using 4 M3x20mm Screws with Nuts to hold on the wheelie bar.
A good wheelie bar is the strc version. Part Number - ST3678W
Print in the orientation the model loads into your slicer (as shown in the photo with the supports). Use at least 5 layers of dense supports. 0.15-0.2mm layers have been shown to be the strongest (CNCKitchen). Print this part with at least 4 perimeters and at least 50-100% infill. I recommend printing with PETG, ABS, Nylon, or Polycarbonate. Print at a relatively high temp to get the best layer bonding possible.
| Date published | 08/07/2020 |
| Price | $4.99 |
| Dimensions | 41.9mm x 46.7mm x 61mm |
