DR10 / DB10 / ProSC10 / Trophy Rat Wheelie Bar Mount
$4.99 DR10 / DB10 / ProSC10 / Trophy Rat Wheelie Bar Mount
Published 2020-07-08T14:55:42+00:00
This will let you mount a Traxxas style wheelie bar onto an Associated ProSC10, DB10 Reflex, Trophy Rat Trucks or the DR10.
This does NOT work with the older SC10 based on the B4 platform
I recommend using 4 M3x20mm Screws with Nuts to hold on the wheelie bar to the mount.
A good wheelie bar is the strc version. Part Number - ST3678W
Print in the orientation the model loads into your slicer (as shown in the photo with the supports). Use at least 5 layers of dense supports. 0.15-0.2mm layers have been shown to be the strongest (CNCKitchen). Print this part with at least 4 perimeters and at least 50-100% infill. I recommend printing with PETG, ABS, Nylon, or Polycarbonate. Print at a relatively high temp to get the best layer bonding possible.
| Date published | 08/07/2020 |
| Price | $4.99 |
| Dimensions | 44.34mm x 52mm x 61mm |
